Development of chromium-impregnated sulfated silica as a mesoporous catalyst in the production of biogasoline from used cooking oil via a hydrocracking process

Karna Wijaya,Tyas Sekar Ningrum,Aldino Javier Saviola,Niko Prasetyo,Zulfaa Lola Ardelia,Riska Astin Fitria,Saharman Gea,Latifah Hauli,Amalia Kurnia Amin,Wahyu Dita Saputri,Adi Setiawan,Won-Chun Oh

DOI: https://doi.org/10.1007/s11144-024-02574-5

2024-01-23

Reaction Kinetics Mechanisms and Catalysis

Abstract:The production of biofuels as an alternative to fossil fuels has been a significant challenge until recently. The present work focuses on hydrocracking used cooking oil (UCO) into biogasoline over chromium impregnated on a sulfated mesoporous silica catalyst. The effects of varying sulfuric acid concentration, calcination temperature, and impregnated chromium content were systematically studied in the synthesis process employing TEOS and NaHCO 3 by sol–gel method. A sulfuric acid concentration of 2 M and calcination temperature of 600 °C produced an SO 4 –SiO 2 catalyst with the best acidity of 8.46 mmol g −1 . Variation of chromium content (wt%) of 1% had Cr/SO 4 –SiO 2 catalyst with the best acidity of 8.57 mmol g −1 . SiO 2 , SS 2–600, and Cr-SS 1 catalysts were tested for their performance in the hydrocracking of UCO into biogasoline at an optimum temperature of 450 °C, H 2 gas flow rate of 20 mL min −1 , catalyst-to-feed ratio of 1:100 wt%, and time of 2 h. Hydrocracking using a Cr-SS 1 catalyst produced the most liquid product at 37.14% with the highest gasoline fraction selectivity of 29.38%.

chemistry, physical