Abstract:Failure of short columns in concrete buildings has been extensively reported during past earthquakes. Assessing the behaviour of short columns is challenging and often requires using time-consuming advanced numerical modelling. This article presents a new and practical Short Column Macro Element (SCME) that predicts accurately the behaviour of concrete short columns. A 1/3-scale one-storey building with short columns is subjected to lateral loading tests until failure. The experimental results from the building are then used to calibrate a numerical model in Abaqus®. It is shown that the numerical model matches well the experimental results. The experimental crack patterns and stress distribution from Abaqus® are then used to determine the load path within the short column. Based on these data, a new strut-and-tie SCME is proposed and implemented in OpenSees software to simulate accurately (within 5% accuracy) the behaviour of the short columns of the tested building. Subsequently, the frame models calibrated in OpenSees and Abaqus® are modified to examine numerically the effectiveness of highly deformable FRP-confined rubberised concrete (FRP CRuC) at increasing the deformability of short columns with different levels of FRP confinement (1, 2 or 3 layers). The numerical results show that whilst the tested building failed at a small displacement of 5.4 mm (0.43% drift ratio), the use of FRP CRuC short columns with minimal confinement (1 layer of AFRP only) increased the building's displacement by almost seven times to 37 mm (3.0% drift ratio). This also enabled more redistribution of forces to other structural members of the building. This article contributes towards the development of practical design/analysis models for short columns made of conventional concrete and FRP CRuC, which are scarce in the existing literature.

Performance of CFRP-confined concrete cylinder specimens - laboratory study

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Experimental research on seismic behavior of concrete-filled reactive powder concrete tubular columns

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Behaviour of short columns made with conventional or FRP-confined rubberised concrete: An experimental and numerical investigation

Experimental behavior of reinforced concrete columns confined with carbon-FRCM composites

EXPERIMENTAL STUDY ON SEISMIC STRENGTHENING OF RC COLUMNS WITH WRAPPED CFRP SHEETS

Experimental and numerical study of PEN FRP-strengthened circular RC columns under lateral cyclic loading with high axial compression ratio

FRP-confined Concrete Cylinders: Axial Compression Experiments and Strength Model

An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes

3D Finite Element Pseudodynamic Analysis of Deficient RC Rectangular Columns Confined with Fiber Reinforced Polymers under Axial Compression

Compressive Behaviour of RC Column with Fibre Reinforced Concrete Confined by CFRP Strips

Seismic performance of reinforced concrete beam–column joint strengthening by frp sheets

Cyclic Axial Compressive Performance of the RC Columns Reinforced with FRP Confined Concrete Core Encased Rebar

Seismic Behavior of Square and Circular Concrete Columns with GFRP Reinforcement

CFRP confinement in retrofitted RC columns via CSB technique under reversed lateral cyclic loading

Experimental Study on the Seismic Performance of Columns Reinforced by the CFRP Bar and Sheet

Seismic behavior of three-dimensional interior reinforced concrete beam–column joints strengthened with CFRP sheets

Synergistic Effects of CFRP and Steel Fiber in Slender RC Columns Under Eccentric Compressive Loads: Experimental and Predictive Analysis

CFRP-confined square RC columns. I: Experimental investigation