Abstract:Metal halide perovskites have received much attention for their application in light-emitting diodes (LEDs) in the past several years. Rapid progress has been made in efficient green, red, and near-infrared perovskite LEDs. However, the development of blue perovskite LEDs is still lagging far behind. Here, we report efficient sky-blue perovskite LEDs by rearranging low-dimensional phase distribution in quasi-2D perovskites. We incorporated sodium ions into the mixed-Cl/Br quasi-2D perovskites with phenylethylammonium as the organic spacer and cesium lead halide as the inorganic framework. The inclusion of the sodium ion was found to significantly reduce the formation of the n = 1 phase, which was dominated by nonradiative transition, and increase the formation of other small-n phases for efficient exciton energy transfer. By managing the phase distribution, a maximum external quantum efficiency (EQE) of 11.7% was achieved in the sky-blue perovskite LED, with a stable emission peak at 488 nm. Further optimizing the phase distribution and film morphology with Pb content, we demonstrated the sky-blue devices with the average EQE approaching 10%. This strategy of engineering phase distribution of quasi-2D perovskites with a sodium ion could provide a useful way for the fabrication of high-performance blue perovskite LEDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c03765?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c03765</a>.Lifetime parameters for different perovskite films calculated from TRPL decay, summarized performance of perovskite LEDs with different EMLs for comparison, absorption and PL spectra of 3D perovskites with mixed CsCl and CsBr, performance of perovskite LEDs by adding different content of PEABr, calculated formation energies of 2D perovskites, performance of cross-checked devices based on 1.1PbBr2, PL spectra of quasi-2D perovskite films with 20% CsBr replacing 20% NaBr, XPS and UPS spectra of perovskite films without and with 20% NaBr, device performance of perovskite LEDs by adding different content of NaBr, SEM and AFM images of different quasi-2D perovskite films, absorption, PL, XRD spectra, and TRPL decay of perovskite films with 1.0 PbBr2 and 1.1 PbBr2, photographs of operating perovskite LEDs and their corresponding EMLs under ultraviolet lamp, device performance of perovskite LEDs with various excess PbBr2 and 1.1PbBr2 but different content of NaBr, and stability of EL spectra of perovskite LEDs driven by voltage (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c03765/suppl_file/nn0c03765_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Two-Dimensional Dion–Jacobson Structure Perovskites for Efficient Sky-Blue Light-Emitting Diodes

Mixed Ruddlesden–Popper and Dion–Jacobson Phase Perovskites for Stable and Efficient Blue Perovskite LEDs

Rearranging Low-Dimensional Phase Distribution of Quasi-2D Perovskites for Efficient Sky-Blue Perovskite Light-Emitting Diodes

Energy‐Level Regulation and Low‐Dimensional Phase Rearrangement via a Multifunctional Spacer Group toward Efficient Sky‐Blue Quasi‐2D Perovskite Light‐Emitting Diodes

Reduced Energetic Disorders in Dion–Jacobson Perovskites for Efficient and Spectral Stable Blue LEDs

Highly Efficient Sky-Blue Perovskite Light-Emitting Diode Via Suppressing Nonradiative Energy Loss

Modulating low-dimensional domains of self-assembling quasi-2D perovskites for efficient and spectra-stable blue light-emitting diodes

Regulating the continuous and concentrated distribution of Quasi-2D perovskite phases to achieve Sky-Blue Light-Emitting diodes with efficiency approaching 17%

Color-stable highly luminescent sky-blue perovskite light-emitting diodes

High‐n Phase Suppression for Efficient and Stable Blue Perovskite Light‐Emitting Diodes

Enhancing energy transfer via inhibition defect density of coupled quasi-2D perovskite layers for efficient sky-blue light-emitting diodes

Low‐Dimensional Phase Distribution of Quasi‐2D Perovskites Induced by Interfacial Effect Enables Efficient Blue Lighting‐Emitting Diodes

High‐Efficiency and Emission‐Tunable Inorganic Blue Perovskite Light‐Emitting Diodes Based on Vacuum Deposition

Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Simultaneous Low-Order Phase Suppression and Defect Passivation for Efficient and Stable Blue Light-Emitting Diodes

Manipulating Crystallization Dynamics for Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes

Efficient and Stable Blue Perovskite Light-Emitting Devices Based on Inorganic Cs 4 PbBr 6 Spaced Low-Dimensional CsPbBr 3 through Synergistic Control of Amino Alcohols and Polymer Additives

Efficient Blue Light-Emitting Diodes Based on Quantum-Confined Bromide Perovskite Nanostructures

Efficient Blue Light Emitting Diodes Based On Europium Halide Perovskites

Phase Distribution Management for High-Efficiency and Bright Blue Perovskite Light-Emitting Diodes

Efficient and Color-Tunable Quasi-2D CsPbBrxCl3–x Perovskite Blue Light-Emitting Diodes