Abstract:The red clay is widely distributed in Guizhou province, which is characterized by high natural moisture content, difficult compaction and serious shrinkage and crackingin, and phosphogypsum is discharged for 5 million tons every year in Guizhou province. For the sake of effectively reducing the accumulation of phosphogypsum, mixtures were prepared with cement as a curing agent and mass ratios of cement to phosphogypsum of 1:1, 1:2 and 1:3 (low content phosphogypsum group) and phosphogypsum to red clay of 1:1, 1:2 and 1:3 (high content phosphogypsum group). Unconfined compressive strength, expansion, shrinkage and dynamic characteristic tests were conducted to analyze the behavior and mechanical properties of the mixtures. The modification mechanism of the mixtures by phosphogypsum was further explored by XRD (X-ray diffraction) and SEM (scanning electron microscopy). which provided a theoretical basis for the application of phosphogypsum in highway engineering and improved the engineering properties of red clay. The results show that the unconfined compressive strength of the phosphogypsum stabilized soil in the low content phosphogypsum group is greater than that in the high content phosphogypsum group. When cement:phosphogypsum = 1:2.2–1:3, the unconfined compressive strength of the mixture is maximum. When cement:phosphogypsum = 1:3, the maximum dynamic shear modulus of phosphogypsum stabilized soil is the largest. The absolute expansion rate and linear shrinkage rate of phosphogypsum stabilized soil in the low content phosphogypsum group are greater than those in the high content phosphogypsum group. When cement: phosphogypsum = 1:1–1:3, the absolute expansion rate is 6.5–12.3%, and the linear shrinkage rate is 1.3–2%. When red clay:Phosphogypsum = 1:1–1:3, the absolute expansion rate is 0.2–4%, and the linear shrinkage rate is 1–1.5%. The more phosphogypsum content, the smaller the expansion deformation and shrinkage deformation of the mixture. It is suggested that mass ratios of phosphogypsum to red clay is 1:1, and the cement content is 5%. Which can not only make full use of phosphogypsum solid waste, but also improve the engineering properties of red clay.

Mechanical Performance of the Phosphogypsum Baking-free Bricks

Utilization of waste phosphogypsum to prepare non-fired bricks by a novel Hydration–Recrystallization process

Preparation of Load-Bearing Building Materials from Autoclaved Phosphogypsum

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Study on the Preparation Technology of Brick with Phosphogypsum Pretreated by Steam and Its Strength Mechanism

Study on the Mechanical Properties, Microstructure and Hydration Mechanism of Phosphogypsum-Based Geopolymer Cement with Added Micron-Sized Silica Particles

Influence of cement on properties of calcined phosphogypsum based composite cementitious materials

Synthesis of High-Strength and Water-Resistant Phosphogypsum Small Hollow Block

The effects of admixtures on the durability properties of phosphogypsum-based cementitious materials

A Sustainable Composite Cementitious Material Manufactured by Phosphogypsum Waste

Mechanical properties and modification mechanism of phosphogypsum stabilized soil

The use of phosphogypsum for soil bricks manufacturing as an alternative for its sustainable destination

Performance Study and Multi-Index Synergistic Effect Analysis of Phosphogypsum-Based Composite Cementitious Material

Improving the mechanical property and water resistance of β-hemihydrate phosphogypsum by incorporating ground blast-furnace slag and steel slag

Effect of varying water content and extreme weather conditions on the mechanical performance of sludge bricks solidified/stabilized by hemihydrate phosphogypsum, slag, and cement

Recovering Untreated Phosphorus Tailings and Coal Gangue to Prepare Ceramic Lightweight Bricks

Synergistic Effects of Amorphous Porous Materials and Anhydrous Na2CO3 on the Performance of Bricks with High Municipal Sewage Sludge Content

Experimental study on utilization FGD byproducts in building bricks

Eco-friendly solid waste-based cementitious material containing a large amount of phosphogypsum: Performance optimization, micro-mechanisms, and environmental properties

Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field