Abstract:Background: Platinum (Pt), palladium (Pd), rhodium (Rh) and iridium (Ir) are platinum group elements (PGEs) and also important elements of geochemistry and environmental chemistry with the similar physic-chemical properties, which have been widely used in industry and laboratory. However, due to the low abundance and inhomogeneous distribution in natural ore as well as the nugget effect, the accurate determination of PGEs has been a challenge to analytical chemistry. Methods: In this work, a novel fire assay method was reported for the determination of ultra-trace Pt, Pd, Rh and Ir in geochemical samples. Tin powder (Sn) instead of stannic oxide (SnO 2 ) was used as a fire assay collector to reduce the melting temperature from 1250°C to 1050°C, the escape of molten material caused by high temperature was successfully avoided. Tin bead was compressed into thin slice and dissolved by HCl. For the target Pt, Pd, Rh and Ir, HCl insoluble substance such as PtSn 4 , PdSn 4 , RhSn 4 and Ir 3 Sn 7 were formed and separated from matrix by filtering. The metal compounds precipitate together with filter paper were microwave-assisted completely digested by aqua regia (50%, v/v), thence the sample solution was determined by inductively coupled plasma mass spectrometry (ICP-MS). Results: Compared with nickel oxide and lead oxide in nickel sulfide /lead fire assay, the reagent blank of tin powder were relatively low and could be directly employed in tin fire assay to collect Pt, Pd, Rh and Ir without purifying. Moreover, the harm of nickel oxide and lead oxide to the analyst and environment was avoided by using the non-toxic tin powder. The decomposition method of chromite and black shale was investigated as well as the amount of tin powder and flour, microwave digestion program for the determination of Pt, Pd, Rh and Ir were optimized. Besides, the influence of mass spectrum interference of co-existing elements was discussed and the standard mode and kinetic energy discrimination collision pool mode were compared. Under the optimal conditions, excellent curve fitting of Pt, Pd, Rh and Ir were obtained between 0.01~100 ng mL -1 , with the correlation coefficients exceeding 0.9996. The detection limits were from 0.003 ng g -1 to 0.057 ng g -1 . Conclusion: The developed method was applied to analyze the Chinese Certified Reference Materials and the determined values were in good agreement with the certified values.

Cadmium and cobalt ions enhanced-photochemical vapor generation for determination of trace rhenium by ICP-MS

Microwave Plasma Torch Mass Spectrometry for Some Rare Earth Elements

Determination of trace rare earth elements in coal fly ash and atmospheric particulates by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Investigation on pretreatment method for the determination of rare earth elements in polymetallic mineral samples in Pan-Xi region by ICP-MS

Determination of Rhenium in Seawater from the Jiulong River Estuary and Taiwan Strait, China by Automated Flow Injection Inductively Coupled Plasma–Mass Spectrometry

Photochemical vapor generation of Zinc and Gallium

Cadmium-Assisted Photochemical Vapor Generation of Arsenic from Low Concentration of Formic Acid Media

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Determination Of Trace Rare Earth Elements In Soils By Inductively Coupled Plasma-Mass Spectrometry After Microwave Digestion For Sample Preparation

Efficient preconcentration of ultra-trace rhenium from geological materials via induced adsorption for accurate isotope analysis

Determination of Rare Earth Elements in Trialkyl Phoshine Oxide(TRPO)-Kerosene by ICP-AES

Chemical vapor generation of tungsten for atomic spectrometric determination: Homogeneous sensitizer and mechanism study

Sensitive Determination of Arsenic by Photochemical Vapor Generation with Inductively Coupled Plasma Mass Spectrometry: Synergistic Effect from Antimony and Cadmium

Coordination Investigation of Rhenium with MAG3 Using LC-MS and UV Spectrometer and the Simple Radiolabelling Process

Elimination of the Spectral Interference from Polyatomic Ions with Rare Earth Elements in Inductively Coupled Plasma Mass Spectrometry by Combining Algebraic Correction with Chromatographic Separation

Minimization of mass interferences in quadrupole inductively coupled plasma mass spectrometric (ICP-MS) determination of palladium using a flow injection on-line displacement solid-phase extraction protocol

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent

Simultaneous Determination of Ultra-trace Pt, Pd, Rh and Ir in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry Following Tin Fire Assay Preconcentration and Microwave Digestion

Trace rare earth elements analysis in atmospheric particulates and cigar smoke by ICP-MS after pretreatment with magnetic polymers

Efficient Photochemical Vapor Generation from Low Concentration Formic Acid Media

Determination of trace lead by hydride generation–inductively coupled plasma–mass spectrometry