Abstract:The aim of the study was to develop a design methodology for the UltraHigh Molecular Weight Polyethylene (UHMWPE)-based composites used in friction units. To achieve this, stress–strain analysis was done using computer simulation of the triboloading processes. In addition, the effects of carbon fiber size used as reinforcing fillers on formation of the subsurface layer structures at the tribological contacts as well as composite wear resistance were evaluated. A structural analysis of the friction surfaces and the subsurface layers of UHMWPE as well as the UHMWPE-based composites loaded with the carbon fibers of various (nano-, micro-, millimeter) sizes in a wide range of tribological loading conditions was performed. It was shown that, under the “moderate” tribological loading conditions (60 N, 0.3 m/s), the carbon nanofibers (with a loading degree up to 0.5 wt.%) were the most efficient filler. The latter acted as a solid lubricant. As a result, wear resistance increased by 2.7 times. Under the “heavy” test conditions (140 N, 0.5 m/s), the chopped carbon fibers with a length of 2 mm and the optimal loading degree of 10 wt.% were more efficient. The mechanism is underlined by perceiving the action of compressive and shear loads from the counterpart and protecting the tribological contact surface from intense wear. In doing so, wear resistance had doubled, and other mechanical properties had also improved. It was found that simultaneous loading of UHMWPE with Carbon Nano Fibers (CNF) as a solid lubricant and Long Carbon Fibers (LCF) as reinforcing carbon fibers, provided the prescribed mechanical and tribological properties in the entire investigated range of the “load–sliding speed” conditions of tribological loading.

UHMWPE/CaSiO3 Nanocomposite: Mechanical and Tribological Properties

Study on the Impact of a Combination of Synthetic Wollastonite and 2-Mercaptobenzothiazole-Based Fillers on UHMWPE Polymeric Matrix

Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding

Optimization of tribological and mechanical properties of nanocomposites of polyurethane/poly(vinyl acetate)/CaCO3

Increasing Wear Resistance of UHMWPE by Loading Enforcing Carbon Fibers: Effect of Irreversible and Elastic Deformation, Friction Heating, and Filler Size

Carbon fiber/nano SiO 2 reinforced polyelectrolyte-graft UHMWPE for water lubricated superlubricity

Carbon Fiber/nano SiO2 Reinforced Polyelectrolyte-Graft UHMWPE for Water Lubricated Superlubricity

Tribological Behavior of High Density Polyethylene Nanocomposites with Silane Treated Carbon Nanofibers

Simultaneous Improvements in Wear Resistance and Mechanical Properties of Uhmwpe Nanocomposite Fabricated Via A Facile Approach

Comparative study of the mechanical and wear performance of short carbon fibers and mineral particles (Wollastonite, CaSiO3) filled epoxy composites

Mechanical and Tribological Properties of Polytetrafluoroethylene Modified with Combined Fillers: Carbon Fibers, Zirconium Dioxide, Silicon Dioxide and Boron Nitride

Influence of polyphenyl ester and nanosized copper filler on the tribological properties of carbon fibre–reinforced ultra-high-molecular-weight polyethylene composites

In Situ Fabrication of Cellulose Nanocrystal‐silica Hybrids and Its Application in UHMWPE: Rheological, Thermal, and Wear Resistance Properties

An Investigation on Tribological Properties and Mechanical Properties of UHMWPE/polycrystalline Mullite Fiber

Tribological, Physicomechanical, and Other Properties of Composites Based on Ultra-High Molecular-Weight Polyethylene, Polytetrafluoroethylene, and Еthylene–Tetrafluoroethylene Copolymer with Quasicrystalline Filler Al–Cu–Fe

Mechanical Properties, Tribological Behavior, and Biocompatibility of High-Density Polyethylene/carbon Nanofibers Nanocomposites

Free Abrasive Wear Behavior of UHMWPE Composites Filled with Wollastonite Fibers

Mechanical and tribological performances of C-SiC nanocomposites synthetized from polymer-derived ceramics sintered by spark plasma sintering

Tribological Behavior of Hybrid PTFE/Kevlar Fabric Composites with Nano-Si3n4 and Submicron Size WS2 Fillers

Molecular Dynamics Simulation of Mechanical and Tribological Properties of Ultrahigh Molecular Weight Polyethylene Enhanced by Modified Silica Nanoparticles

Wear and Friction of Carbon Nanofiber-Reinforced Hdpe Composites