Abstract:Introduction: Manual handling personnel and those performing manual handling tasks in non-traditional manual handling industries continue to suffer debilitating and costly workplace injuries. Smart assistive devices are one solution to reducing musculoskeletal back injuries. Devices that provide targeted assistance need to be able to predict when and where to provide augmentation via predictive algorithms trained on functional datasets. The aim of this study was to describe how an increase in load impacts spine kinematics during a ground-to-platform manual handling task. Methods: Twenty-nine participants performed ground-to-platform lifts for six standardised loading conditions (50%, 60%, 70%, 80%, 90%, and 100% of maximum lift capacity). Six thoracic and lumbar spine segments were measured using inertial measurement units that were processed using an attitude-heading-reference filter and normalised to the duration of the lift. The lift was divided into four phases weight-acceptance, standing, lift-to-height and place-on-platform. Statistical significance of sagittal angles from the six spine segments were identified through statistical parametric mapping one-way analysis of variance with repeated measures and post hoc paired t-tests. Results: Two regions of interest were identified during a period of peak flexion and a period of peak extension. There was a significant increase in spine range of motion and peak extension angle for all spine segments when the load conditions were increased ( p 80% maximum lift capacity, inclusive) to light loads (<80% maximum lift capacity) ( p < 0.001). Discussion: The 50%–70% maximum lift capacity conditions being significantly different from heavier load conditions is representative that the kinematics of a lift do change consistently when a participant's load is increased. The understanding of how changes in loading are reflected in spine angles could inform the design of targeted assistance devices that can predict where and when in a task assistance may be needed, possibly reducing instances of back injuries in manual handling personnel.

Ergonomic Assessment of Low Back Loading Pattern During Occupational Lifting Task in a Lower Limb Amputee: Minimizing Injury Risk.

Flexible sensor-based biomechanical evaluation of low-back exoskeleton use in lifting

Using Digital Human Modelling to Evaluate the Risk of Musculoskeletal Injury for Workers in the Healthcare Industry

Motion optimization and parameter identification for a human and lower-back exoskeleton model

The highs and lows of lifting loads: SPM analysis of multi-segmental spine angles in healthy adults during manual handling with increased load

Estimation of lower back muscle force in a lifting task using wearable IMUs

Effect of low back pain on the kinetics and kinematics of the lumbar spine - a combined in vivo and in silico investigation

Ergonomics Evaluation of Manual Lifting Task on Biomechanical Stress in Symmetric Posture

Data-Driven Ergonomic Risk Assessment of Complex Hand-intensive Manufacturing Processes

Analysis of Human-Exoskeleton System Interaction for Ergonomic Design

Automated Workers Ergonomic Risk Assessment in Manual Material Handling using sEMG Wearable Sensors and Machine Learning

Biomechanical comparison between manual and motorless device assisted patient handling: sitting to and from standing position

Biomechanics, actuation, and multi-level control strategies of power-augmentation lower extremity exoskeletons: an overview

Development Of A Low Cost System For Lifting Related Injury Analysis

Automated Workers’ Ergonomic Risk Assessment in Manual Material Handling Using sEMG Wearable Sensors and Machine Learning

Biomechanical analysis based on a full-body musculoskeletal model for evaluating the effect of a passive lower-limb exoskeleton on lumbar load

Simulation analysis of low back forces in Snatch and Clean & Jerk movements via digital human modelling

Closed-Chain Inverse Dynamics for the Biomechanical Analysis of Manual Material Handling Tasks through a Deep Learning Assisted Wearable Sensor Network

Time Efficiency and Ergonomic Assessment of a Robotic Wheelchair Transfer System

Design of an assistive trunk exoskeleton based on multibody dynamic modelling

Comparing spinal loads in individuals with unilateral transtibial amputation with and without chronic low back Pain: An EMG-Informed approach