Abstract:Multiple electron beam direct write lithography is an emerging technology promising to address new markets, such as truly unique chips for security applications. The tool under consideration, the Mapper FLX-1200, exposes long 2.2 μm-wide zones called stripes by groups of 49 beams. The critical dimensions inside and the registration errors between the stripes, called stitching, are controlled by internal tool metrology. Additionally, there is great need for on-wafer metrology of critical dimension and stitching to monitor Mapper tool performance and validate the internal metrology. Optical Critical Dimension (OCD) metrology is a workhorse technique for various semiconductor manufacturing tools, such as deposition, etching, chemical-mechanical polishing and lithography machines. Previous works have shown the feasibility to measure the critical dimension of non-uniform targets by introducing an effective CD and shown that the non-uniformity can be quantified by a machine learning approach. This paper seeks to extend the previous work and presents a preliminary feasibility study to monitor stitching errors by measuring on a scatterometry tool with multiple optical channels. A wafer with OCD targets that mimic the various lithographic errors typical to the Mapper technology was created by variable shaped beam (VSB) e-beam lithography. The lithography process has been carefully tuned to minimize optically active systematic errors such as critical dimension gradients. The OCD targets contain horizontal and vertical gratings with a pitch of 100 nm and a nominal CD of 50 nm, and contain various stitching error types such as displacement in X, Y and diagonal gratings. Sensitivity to all stitching types has been shown. The DX targets showed non-linearity with respect to error size and typically were a factor of 3 less sensitive than the promising performance of DY targets. A similar performance difference has seen in nominally identical diagonal gratings exposed with vertical and horizontal lines, suggesting that OCD metrology for DX cannot be fully characterized due to lithography errors in gratings with vertical lines.

Machine learning aided process control: critical dimension uniformity control of etching process in 1z nm DRAM

Modelling and Controlling of Critical Dimension in Semiconductor Manufacturing

Machine learning Assists on High Aspect Ratio Slit Trench Etching in 3D NAND

Universal Deoxidation of Semiconductor Substrates Assisted by Machine-Learning and Real-Time-Feedback-Control

Applying Machine Learning Models on Metrology Data for Predicting Device Electrical Performance

Machine Learning Applied to Electron Beam Lithography to Accelerate Process Optimization of a Contact Hole Layer

Introducing machine learning-based application for writer main pole CD metrology by dual beam FIB/SEM

Massive metrology and inspection solution for EUV by area inspection SEM with machine learning technology

Machine Learning based CVD Virtual Metrology in Mass Produced Semiconductor Process

Ellipsometric critical dimension metrology employing mid-infrared wavelengths for high-aspect-ratio channel hole module etch processes

Optimizing focus and dose process windows for robust process control using a multi-feature analysis

Critical Dimension Prediction of Metal Oxide Nanoparticle Photoresists for Electron Beam Lithography Using a Recurrent Neural Network.

Feasibility of monitoring a multiple e-beam tool using scatterometry and machine learning: stitching error detection

Multi-Stage Process Diagnosis Networks in Semiconductor Manufacturing

Deep Learning Regression of VLSI Plasma Etch Metrology

Recurrent feature-incorporated convolutional neural network for virtual metrology of the chemical mechanical planarization process

Machine Learning Based Wafer Defect Detection

A Study on Process Diagnosis Technology to Improve the Reliability of the Etching Process

Preliminary empirical results suggesting the mapping of dynamic in situ process signals to real-time wafer attributes in a plasma etch process

Frequency Dependent Nonlinear Iterative Learning Control With Application To A Wafer Stage

Development of Virtual Metrology Using Plasma Information Variables to Predict Si Etch Profile Processed by SF6/O2/Ar Capacitively Coupled Plasma