Abstract:The wettabilities of molten metals on ceramics are poor normally. In order to improve the wettability, all existing ceramic brazing methods introduce a compound transition layer that is formed by the reaction of active metal and ceramic. The transition layer between brazing seam and ceramic however creates negative effect on the properties of brazing joints. This paper reports our study of the wetting effect of sputtered Al particles on AlN, which enables the direct brazing of AlN using deposited Al-based films as fillers, thereby eliminating the need of a transition layer. The results show that under the bombardment of energetic sputtered Al particles, Al-N chemical bonding is formed at the interface between Al film and AlN, which typically requires temperatures above 850 ℃, much higher than the melting point of Al. The bonding remained intact even after the Al film has been melted, achieving the wetting effect on AlN. As a result, the direct brazing of AlN without the need of a transition layer becomes feasible. The shear strength of Al/AlN joint using this process reaches 104 MPa. The addition of 3.8 at.% Cu to film fillers increases the shear strength to 165 MPa. The fracture is generated in metallic brazing seam in both cases. When Cu content increases to 9.1 at.%, the segregation of Cu at the interface between the brazing seam and the ceramic reduces the shear strength of the joint to 95 MPa. With Al-20 at.% Ge, the brazing temperature can be lowered to 510 ℃, although the segregation of Ge at interface results in a low shear strength of 48 MPa. Instead of the traditional use of molten metals, utilization of the metallic vapor particles to bombard AlN achieves the wetting and the direct brazing of ceramics, with no negative effect of transition layers. This breakthrough method provides a brand new perspective to the technique of ceramic brazing.

Effects of Brazing Technology on Hermeticity of Alumina Ceramic-Metal Joint Used in Nuclear Power Plants

Brazing Between High Purity Alumina Ceramic and Oxygen-Free Copper

"Wetting" and Brazing of Aln by Sputtered Al

The brazing of Al2O3 ceramic and other materials

The Effect of Temperature on Electron Beam Brazing of Titanium to Alumina Ceramic

Research of Alumina and Brazing Filler Metal Interface

Brazing between high purity alumina ceramics and titanium

Pressure brazing of Si3N4 ceramics with Al-Li alloy and high temperature properties of the joints

Effect of brazing process on microstructure evolution and mechanical properties of Ti6Al4V/ZrO2 joints after laser surface treatment

The dependence of microstructure and mechanical properties on substrate heat treatment in AlN ceramics/AgCuTi/316 stainless steel brazed joints

Pressure ressure brazing of Si3N4 ceramics with Al-Li alloy and high temperature properties of the joints

Active Brazing of High Purity Alumina to Niobium Metal

Effect of Cu interlayer with different thickness on microstructure and properties of Al2O3/Kovar joints brazed with Cu–Ti/Cu/BNi-2 composite filler

Vacuum brazing SiC to Mo using Nb0.74CoCrFeNi2 eutectic high-entropy alloy filler

Effects of ion implantation on the brazing properties of high purity alumina

Effect of welding time on microstructure and properties of Al2O3/AlSiMg/1A95 aluminum alloy direct brazing joint

Enhanced bonding of Al2O3/Al2O3 joints brazed by Ni50Ti50 master alloy interlayer

Secondary Phase Interaction at Interfaces of High-Strength Brazed Joints made using Liquid Phase Sintered Alumina Ceramics and Ag-Cu-Ti Braze Alloys

Microstructure, Mechanical Properties and Hermeticity of W-Cu/HTCC Brazed Joints with Surface Metallization

Effect of sodium silicate solution combined yttrium oxide stabilized zirconia nanopowders on the properties of alumina ceramics fabricated by binder jetting additive manufacturing

Effect of Nickel, Tin, and Indium Doping of the Eutectic Silver–Copper Filler on the Capillary and Contact Processes in Brazing of Nonmetallic Alumina-Based Materials with Titanium