Abstract:The critical cooling rate (Rc) calculated on the basis of the time-temperature-transformation (TTT) curve was taken as the intrinsic criteria of reflecting the glass forming ability (GFA) for the amorphous alloy. The TTT curves were plotted based on the isothermal Wheeler-Boettinger-McFadden (WBM) phase field method (PFM). By analyzing the TTT curves, the influence of different activation energy parameters E and Q for the interface mobility M and nucleation rate P respectively on Rc and GFA were investigated for Fe-25%B (mole fraction) binary amorphous alloy in present paper. The results showed that the activation energy E for the interface mobility M had litter influence on the nose temperature and time for the TTT curves. Under the different thermal activation energy Q1, Q2 and Q3 for the nucleation rate P, the temperatures and times corresponding to the nose tip were 500K, 600K, 775K and 6.2×10−4s, 4.5×10−4s, 9.5×10−4s, respectively, and the calculated values of Rc were 1.57×106K/s, 1.93×106K/s, 7.35×105K/s, respectively, which were in the range of 6.4×105 ~ 6.8×106K/s from the experimental measurements. Under the influence of thermal activation energy Q, the nose tip temperature increased, which meant Q controlled the nose tip temperature, while the higher Q would not get the perfect C shape. It was found that the values of Rc calculated based on the TTT curves by the PFM were in good agreement with the reported experimental values, which verified the feasibility of the glass prediction and the research of the intrinsic physical mechanism of the GFA by the PFM.

Kinetic Approach to Determine the Glass-Forming Ability in Hf-Based Metallic Glasses

Calculation of Mechanical, Thermodynamic and Transport Properties of Metallic Glass Formers

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses

Evaluation of Glass-Forming Ability for Metallic Melts by Phase Field Approach

Applicability of γ* Parameter on Glass Forming Ability of Zr-,Ti-,Hf-(Cu–Ni)-based Metallic Glasses

Glass Forming Ability of Metallic Glasses Evaluated by a New Criterion

Glass Formation of the Fe–Hf System Studied by Thermodynamic Calculation and Ion Beam Mixing

Glass Forming Ability of the Binary Cu–Hf System Studied by Thermodynamic Calculation and Ion Beam Mixing

On the New Criterion to Assess the Glass-Forming Ability of Metallic Alloys

Structural transition and glass-forming ability of the Ni-Hf system studied by molecular dynamics simulation

A New Criterion for Predicting the Glass-Forming Ability of Bulk Metallic Glasses

Prediction of the Glass Forming Ability in a Fe-25%B Binary Amorphous Alloy Based on Phase-Field Method

Glass-forming ability determined from inter-atomic potentials for some miscible/immiscible binary metal systems

Predicting the Glass-Forming-Ability of Alloys by Molecular Dynamics Simulation: A Working Example of Ti–Co Bulk Metallic Glasses

Interatomic potential to predict favored composition for Hf-Cu-Ni metallic glasses formation

On the correlation between glass forming ability (GFA) and soft magnetism of Ni-substituted Fe-based metallic glassy alloys

Hf–Cu–Ni–Al Bulk Metallic Glasses: Optimization of Glass-Forming Ability and Plasticity

Glass Formation for Iron-Based Alloys by Combining Kinetic and Thermodynamic Parameters

Crystallization kinetics of Hf28Be18Ti17Zr17Cu7.5Ni12.5 high-entropy bulk metallic glass

Glass-Forming Ability of an Iron-Based Alloy Enhanced by Co Addition and Evaluated by a New Criterion

Influence of Substitution of Cu by Ni on the Crystallization Kinetics of TiZrHfBeCu High Entropy Bulk Metallic Glass