Abstract:Although fly ash foam concrete (FAFC) is lightweight, heat-retaining, and insulating, its application options are constrained by its weak construction and short lifespan. The effects of various dosage ratios of the foaming agent (i.e., hydrogen peroxide), silica fume, and polypropylene fiber on the dry density, compressive strength, thermal insulation performance, pore structure parameters, and durability of FAFC were analyzed in this study, which sought to address the issues of low strength and low durability of FAFC. According to the findings, there is a negative correlation between the amount of hydrogen peroxide (as the foaming agent) and compressive strength, and, as the silica fume and polypropylene fiber (PP fiber) content rise, the strength will initially rise and then fall. The distribution of pore sizes gradually shifts from being dominated by small pores to large pores as the amount of foaming agent increases, while the porosity and average pore size gradually decrease. When the hydrogen peroxide content is 5%, the pore shape factor is at its lowest. The pore size distribution was first dominated by a small pore size and thereafter by a large pore size when the silica fume and PP fiber concentration increased. Prior to increasing, the porosity, average pore size, and pore shape factor all decreased. Additionally, the impact of PP fiber on the freeze–thaw damage to FAFC was also investigated at the same time. The findings indicate that the freeze–thaw failure of FAFC is essentially frost heave failure of the pore wall. The use of PP fiber is crucial for enhancing FAFC's ability to withstand frost. The best frost resistance is achieved at 0.4% PP fiber content. In conclusion, the ideal ratio for overall performance was found to be 5% hydrogen peroxide content, 4% silica fume content, and 0.1% polypropylene fiber content. The results obtained could be applied in different fields, such as construction and sustainable materials, among others.

Foam Glass Lightened Sorel’s Cement Composites Doped with Coal Fly Ash

Lightweight composite from fly ash geopolymer and glass foam

Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash

Research on Production of Light Building Materials from Fly Ash

Preparation and Properties of Foam Concrete Incorporating Fly Ash

Effect of Cementitious Material Composition on the Performance of Low-Carbon Foamed Lightweight Soil

Study of In Situ Foamed Fly Ash Geopolymer

Preparation of Glass Ceramic Foams for Thermal Insulation Applications from Coal Fly Ash and Waste Glass

Study on the Performance of Foam Concrete Prepared from Decarburized Fly Ash

Examining the Workability, Mechanical, and Thermal Characteristics of Eco-Friendly, Structural Self-Compacting Lightweight Concrete Enhanced with Fly Ash and Silica Fume

POROUS FLY ASH-BASED GEOPOLYMER USABLE AS AN UNCONVENTIONAL CONSTRUCTION MATERIAL

Glass-Ceramic Foams from ‘Weak Alkali Activation’ and Gel-Casting of Waste Glass/Fly Ash Mixtures

Investigating the Mechanical and Durability Characteristics of Fly Ash Foam Concrete

Preparation of ultra-light ceramic foams from waste glass and fly ash

Properties of Structural Lightweight Aggregate Concrete Based on Sintered Fly Ash and Modified with Exfoliated Vermiculite

Lightweight aggregate concrete with an open structure and a porous matrix with an improved ratio of compressive strength to dry density

Development and Characterization of Lightweight Geopolymer Composite Reinforced with Hybrid Carbon and Steel Fibers

Low carbon cementitious materials: Sodium sulfate activated ultra-fine slag/fly ash blends at ambient temperature

Comparison between reactive MgO- and Na2SO4-activated low-calcium fly ash-solidified soils dredged from East Lake, China

Lightweight blended building waste in the production of innovative cement-based composites for sustainable construction

Optimization of coal-based solid waste ceramsite foam concrete mix proportions and performance study