POSS-Functionalized Graphene Oxide/PVDF Electrospun Membranes for Complete Arsenic Removal Using Membrane Distillation

Sebastian Leaper,Edgardo Oscar Avendaño Cáceres,Jose Miguel Luque-Alled,Sarah H. Cartmell,Patricia Gorgojo
DOI: https://doi.org/10.1021/acsapm.0c01402
2021-03-05
ACS Applied Polymer Materials
Abstract:This work demonstrates very high removal rates (below the detection limit of 0.045 ppb) of inorganic arsenic from water using electrospun polyvinylidene difluoride (PVDF) membranes enhanced by the addition of functionalized graphene oxide in membrane distillation. This shows potential for applications in the many parts of the world suffering from arsenic-contaminated groundwater. These membranes were enhanced by the addition of reduced graphene oxide functionalized with superhydrophobic polyhedral oligomeric silsesquioxane molecules (POSS-rGO) into the spinning solutions. The flux of the best-performing rGO-enhanced membrane (containing 2 wt % POSS-rGO) was 21.5% higher than that of the pure PVDF membrane and almost double that of a commercial polytetrafluoroethylene (PTFE) membrane after 24 h of testing, with rejection values exceeding 99.9%. Furthermore, the flux of this membrane was stable over 5 days (∼28 L m–2 h–1) of continuous testing and was more stable than those of the PTFE and control membranes when treating a concentrated fouling solution of calcium carbonate and iron(III) sulfate heptahydrate. It also achieved higher permeate quality in these conditions. The Young's modulus and ultimate tensile strength of the best-performing membrane increased by 38 and 271%, respectively, compared to the pure polymer membrane, while both had similar porosities of ∼91%.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsapm.0c01402.Experimental details for functionalization of graphene oxide with aminopropyl isobutyl-POSS and membrane preparation syntheses as well as membrane characterization and membrane distillation conditions (PDF)This article has not yet been cited by other publications.
polymer science,materials science, multidisciplinary
What problem does this paper attempt to address?