Abstract:Cellulose is a fascinating biopolymer and sustainable raw material. Cellulose particles with at least one dimension in the nanoscale are referred to as nanocellulose. Kenaf fiber is a natural fiber used in this study because it has high mechanical properties and strong interface adhesion with polymers so it provides superior properties to other natural fibers. Polyurethane (PU) foam is widely used as a core layer in sandwich composite construction to produce a lightweight material. This study presents a synthesis of cellulose nano-fibrils (CNF) extracted from East Java, Indonesia based kenaf fibers, an analysis of the effect of adding CNF as a filler and a reinforcement in PU foam composites, and a formulation of PU-CNF foam composite that provided the best mechanical properties as strong and lightweight materials in structural applications. The CNF extraction from kenaf fiber started by fiber pre-treatment including alkalization and bleaching, then mechanical treatment with an Ultra Fine Grinder to produce CNF suspension. The weight variations of CNF in PU foam were 0, 3, 5, 7, and 10 wt%. PU-CNF composite fabrication using the in-situ polymerization method. CNF characterization included TEM, XRD, and FT-IR. TEM results on CNF show that the CNF diameter is in the range of 40-70 nm. The functional group from the FT-IR results showed that the pre-treatment process on kenaf fiber was successful in reducing the lignin and hemicellulose content. XRD results showed that the CNF crystallinity was 75.22%. The PU-CNF foam composite characterization included a compressive test, 3-point bending test, and SEM. The PU foam composite with 3 wt% CNF reinforcement is the best composite which has the optimum value from the results of the compression test and the 3-point bending test. The compressive strength value increased by 20.01%, from 236.997 kPa to 284.434 kPa, the compressive modulus value increased by 29.21% from 5.67 MPa to 7.32 MPa, and the 3-point bending strength value increased 28.29% from 572.24 to 734.15 kPa. All the results expected to support that CNF was a potential reinforcement material with a high surface area for a wide variety of applications.

In-situ modification of low molar ratio urea–formaldehyde resins with cellulose nanofibrils for plywood

Synergistic Impact of Cellulose Nanocrystals with Multiple Resins on Thermal and Mechanical Behavior

Properties of Plywood Produced with Urea-Formaldehyde Adhesive Modified with Nanocellulose and Microcellulose

The characterizations of nanofluid type urea formaldehyde resins

Possibility of Use of NCC-Reinforced Melamine-Urea- Formaldehyde Adhesive in Plywood Manufacturing

OPTIMIZATION OF MATERIAL COMPOSITION FOR THE SYNTHESIS OF UREA FORMALDEHYDE (UF) RESIN MODIFIED BY POLYVINYL ALCOHOL (PVA)

The effect of urea-formaldehyde adhesive modification with diisocyanate-functionalized nanocellulose on the properties of particleboard

Study on structure and properties of glyoxal-urea-formaldehyde copolycondensation resin

Modification of urea-formaldehyde resin adhesives with oxidized starch using blocked pMDI for plywood

Optimization of areca leaf sheath nanolignin synthesis by a mechanical method for in situ modification of ultra-low molar ratio urea-formaldehyde adhesives

Adhesion properties and formaldehyde emissions of MnO2/UF nanocomposite adhesives

Enhancing the performance of low molar ratio urea–formaldehyde resin adhesives via in-situ modification with intercalated nanoclay

Partial replacement of urea-formaldehyde adhesive with fungal biomass and soy flour in plywood fabrication

Incorporation of In Situ Synthesized Nano-Copper Modified Phenol-Formaldehyde Resin to Improve the Mechanical Properties of Chinese Fir: A Preliminary Study

Synthesis and Effect of Nanocellulose Obtained from East Java Kenaf Fiber on Mechanical Properties of Polyurethane Foam Composites as Strong and Lightweight Materials

Effects of nanoclay modification with transition metal ion on the performance of urea–formaldehyde resin adhesives

Low Mole Ratio UF and UMF Resins Entailing Uron-Type Methylene-Ether Groups and their Low Formaldehyde Emission Potentials

Eco-friendly fiberboards with low formaldehyde content and enhanced mechanical properties produced with activated soybean protein isolate modified urea-formaldehyde resin

Semi-liquefied bamboo modified urea-formaldehyde resin to synthesize composite adhesives

Enhancement of the Physical, Mechanical, and Thermal Properties of Epoxy-based Bamboo Nanofiber Nanocomposites

Modified graphene as potential additive for urea formaldehyde (UF) resin in medium density fiberboard (MDF) manufacturing