Abstract:Engineering the electrocatalyst's nanostructure is key-factor in constructing a high-performance electrochemical sensor. The MXene vanadium carbide (V 8 C 7 Tx; VC) nanosheets encapsulating graphitic carbon nanosheets nanocomposite (VC/g-CN NSs NC) as an effective electrocatalyst for detecting clioquinol (CQL) is reported here. The interconnected VC and g-CN nanosheets form a very effective conductive network. The high concentration of O-terminated functional groups in the oxidized VC and the abundant surface area of g-CN contribute to the enhanced electrocatalytic effectiveness of the nanocomposite. The synergistic interaction between the VC NSs and g-CN NSs creates a nanocomposite ideal for CQL detection because it offers many active sites with a fast electron transfer rate. A lower oxidation potential and higher peak current responsiveness distinguish the proposed drug sensor from previously described CQL sensors. Under optimal conditions, the constructed sensors showed strong analytical performance, as shown by a low detection limit of 2.2 nM, high sensitivity of 15.6 μA μM −1 cm −2 , a broad linear range of 0.3–220 μM, and significant recovery outcomes in the analysis of real samples. Thus, the VC/g-CN NSs NC material has promise for use in high-performance electrochemical applications. Graphical Download : Download high-res image (189KB) Download : Download full-size image To ensure food safety and quality, the development of rapid detection of mycotoxins using sensitive and accurate methods is essential. Zearalenone is one of the mycotoxins found in cereals, and its toxicity poses a serious risk to humans. For this concern, a simple ceria silver co doped zinc oxide (Ce-Ag/ZnO) catalyst was prepared by coprecipitation approach. The physical properties of the catalyst were characterized by XRD, FTIR, XPS, FESEM, and TEM. The Ce-Ag/ZnO catalyst was used as an electrode material for the detection of ZEN in food samples due to its synergistic effect and high catalytic activity. The sensor exhibits good catalytic performance with a detection limit of 0.26 μg/mL. Moreover, the efficiency of the prepared sensor was confirmed by selectivity in interference studies and real-time analysis in food samples. Our research is an essential technique for using trimetallic heterostructures to study the construction of sensors. The environmental toxicity of sulfa drugs has attracted significant attention worldwide. Herein, we constructed a carbon-decorated BiPO 4 rod-modified glassy carbon electrode (GCE) for electrochemical detection of sulfamethazine (SMZ). The composite was prepared based on carbon black (CB) and BiPO 4 rods by a simple, greener, nontoxic, and cost-effective ultrasonication method. The physicochemical and electrochemical properties of CB/BiPO 4 composite has characterized using different physicochemical and electrochemical techniques. The developed CB/BiPO 4 composites modified GCE exhibited effective electrochemical active surface area and fast electron transfer rate towards SMZ determination. The developed sensor found wide linear ranges, low limit of detection (LOD), excellent sensitivity, and selectivity. Additionally, the developed sensor successfully analyzed the practical applicability with satisfactory outcomes. Therefore, the present report demonstrates the cheap and cost-effective platform for hazardous SMZ determination. Generally, the nanoparticle along with the nanosheet architecture has excellent physiochemical properties at the interface of electrode and electrolyte. In this work, the SrFe 2 O 4 nanorod was prepared through the simple hydrothermal method, as well as the S-GCN prepared (urea + thiourea) by thermal polymerization, and using the solvent evaporation process SrFe 2 O 4 nanorod was decorated on the S-GCN nanosheet, which is used for the electrochemical detection of flufenamic acid (FFA). The electrocatalytic activity of the bare GCE was enhanced by the SrFe 2 O 4 /S-GCN because SrFe 2 O 4 has more active sides and S-GCN has a large surface area which is confirmed by the EIS and CV analysis. Moreover, the synergistic effect between SrFe 2 O 4 nanorods and the S-GCN nanosheet provides the fast electron transfer property and enhanced electrocatalytic activity towards the FFA. Our proposed sensor exposed the lower level of the detection limit of 0.004 μM and the linear range of 0.01–384 μM with the LOQ of 0.015 μM. Furthermor -Abstract Truncated-

Mixture of carbon aerogel with Pd–WO3 nanorods for amperometric determination of mesalazine

Electrochemical Recognition and Electrochemical Oxidation of Mesalazine Drug at PMA Modified Glassy Carbon Electrode

Fabrication of iron tin oxide/tin oxide intertwined graphitic carbon nitride hybrid composite electrocatalyst for electrochemical detection of 5-aminosalicylic acid in human urine and pharmaceutical tablet samples

A sensitive DNA biosensor for determination of mesalazine using PPy/Sponge-like Carbon/La3+-doped CuO nanocomposite

A green and simple procedure to synthesize dysprosium cerate plate-like nanostructures and their application in the electrochemical sensing of mesalazine

Application of Multiwalled Carbon Nanotubes/Ionic Liquid Modified Electrode for Amperometric Determination of Sulfadiazine

Fabrication of an Electrocatalyst Based on Rare Earth Manganites Incorporated with Carbon Nanofiber Hybrids: An Efficient Electrochemical Biosensor for the Detection of Anti-Inflammatory Drug Mefenamic Acid

Development of bismuth sulfide nanorods and polyamidoamine dendrimer on reduced graphene oxide as electrode nanomaterials for electrochemical determination of salbutamol

A Novel Electrochemical Sensor Based on Pd Confined Mesoporous Carbon Hollow Nanospheres for the Sensitive Detection of Ascorbic Acid, Dopamine, and Uric Acid

Facile and novel synthesis of palladium nanoparticles supported on a carbon aerogel for ultrasensitive electrochemical sensing of biomolecules

Fabrication of a disposable electrode based on recordable gold compact disc modified with Bi-Bi 2 O 2 CO 3 @ graphitic carbon nitride nanocomposite for the simultaneous detection of mesalazine and uric acid in biological fluids

Polydopamine Bridged MXene and NH2-MWCNTs Nanohybrid for High-Performance Electrochemical Sensing of Acetaminophen

The Mn‐zeolite/Graphite Modified Glassy Carbon Electrode: Fabrication, Characterization and Analytical Applications

Application of MnO2 Nanorod–Ionic Liquid Modified Carbon Paste Electrode for the Voltammetric Determination of Sulfanilamide

Methyl orange-crosslinked polypyrrole hydrogel enabled N, O, S co-doped porous carbon for highly sensitive determination of three redox-active biomolecules

Amperometric sensing of catechol by using a nanocomposite prepared from Ag/Ag2O nanoparticles and N,S-doped carbon quantum dots

Vertically grown nanosheets conductive polypyrrole as a sorbent for nanomolar detection of salicylic acid

Microporous P-doped carbon spheres sensory electrode for voltammetry and amperometry adrenaline screening in human fluids

Nanocomposites of Palladium Nanoparticle-Loaded Mesoporous Carbon Nanospheres for the Electrochemical Determination of Hydrogen Peroxide.

Oxygen-terminated vanadium carbide with graphitic carbon nitride nanosheets modified electrode: A robust electrochemical platform for the sensitive detection of antibiotic drug clioquinol

Electrochemical Determination of Paracetamol Using MXene/single-walled Carbon Nanohorns Composite As Sensor