Abstract:Abstract: Concrete is widely considered for its strength to withstand heavy loads and that‟s why this matrix is used for construction purposes. The growth in population has placed an enormous need for more and more infrastructure and it keeps growing. The outcome of this demand is the increase in production of cement. Massive amount of waste materials and byproducts are produced by manufacturing enterprises such as silica fumes, wood ash, and mineral slag and so on. As a result, waste management has become a huge problem for our environment. There are several minerals in wood ash, which can be extracted for further use. A big ingradient calcium carbonate, which is 25% or even 45% (depending on feedstock and burining condition). Less than 10 percent is potash and less than 1 percent is phosphate; there are some elements of iron, manganese, zinc, copper and some metal parts. These numbers however, vary as combustion temperature is an important element for the determination of wood ash. Many of these are in the form of oxides, mainly. If we mix the ashes to water the insoluble silica and calcium carbonate will settle to bottom and sodim salt and soluble potassium will dissolve. Sugarcane is commonly used to produce sugar and ethanol. After sugar juice is extracted from sugarcane, sugarcane bagasse is produced, which is about 50% of the sugarcane level. Bagasse is widely used as a fuel in combining steam production and power generation. In this process, sugarcane ash (SCBA) remains the last waste in the sugar production chain.. However, SCBA is generally disposed of in landfills in India The experimental investigations are carried out for compressive strength, split and flexural strength for curing period of 7, 14 and 28 days. The experimental results show that the for a combined replacement percentage of 8&8%, which includes 8% SCBA and 8% WOOD ASH with addition of aramid fiber 1.2% the values of compressive strength, flexural strength and split tensile strength were higher when compared to other replacement percentages The result shows that concrete workability is fine and within limits after replacing cement with SCBA, WOOD ASH with addition of aramid fiber. However, workability gets reduced at higher replacement of materials. The strength parameters such as compressive strength, flexural strength, and split tensile strength also increase and show an optimum value at 8&8% cement replacement and 1.2% Addition of aramid fibers respectively.

Reuse of Silica Rich Sugarcane Bagasse Ash in Concrete and Influence of Different Curing on the Performance of Concrete

Sugarcane Bagasse Ash-Blended Concrete for Effective Resource Utilization Between Sugar and Construction Industries

Sugarcane bagasse ash as supplementary cementitious material in cement composites: strength, durability, and microstructural analysis

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Enhancing sustainability in concrete: synergistic effects of sugarcane bagasse ash and iron ore tailings as eco-friendly cement and sand replacements

To Study the Partial Replacement of Cement with Sugarcane Bagasse and Wood Ash with Addition of Aramid Fiber

Sustainable development and performance assessment of concrete incorporating biofuel waste

Optimizing the Strength of RCC Beam using Bagasse Ash and Copper Slag

Potential of sugarcane bagasse ash as supplementary cementitious material and comparison with currently used rice husk ash

Reuse of Uncontrolled Burnt Bagasse Ash from Sugar Industries with Waste Rubber Powder in Construction: A Waste to Wealth Approach for Sugar Mills

Comparing influence of inert biochar and silica rich biochar on cement mortar – Hydration kinetics and durability under chloride and sulfate environment

Mechanical and physical characteristics of concrete mixed with sugarcane bagasse ash and recycled polyethylene terephthalate

Slag and Bagasse Ash: Potential Binders for Sustainable Rigid Pavement

Prospective of sugarcane bagasse ash for controlling the alkali‐silica reaction in concrete incorporating reactive aggregates

Effect on Sulfuric Acid Resistance and Shrinkage of Concrete Incorporating Processed Bagasse Ash and Silica Fume

Assessing the utilisation of industrial waste as aggregate and manufactured sand: microstructural and durability characteristics on high-performance concrete

Effect of Biochar and Sewage Sludge Ash as Partial Replacement for Cement in Cementitious Composites: Mechanical, and Durability Properties

Strength and Chloride Resistance of Mortars Blended with SCBA: The Effect of Calcination and Particle Sizing on its Pozzolanic Activity

Valorization of Sugarcane Bagasse Ash as an Alternative SCM: Effect of Particle Size, Temperature-Crossover Effect Mitigation & Cost Analysis

Early age test on sugarcane bagasse ash supplementary cementitious material treated with different water

Short-term analysis on the combined use of sugarcane bagasse ash and rice husk ash as supplementary cementitious material in concrete production