Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The dissemination of additive manufacturing methods has facilitated the design and production of complex structures which have a high strength-to-weight ratio. Cellular materials such as honeycombs have low-weight and high capacity to absorb energy which makes them desirable for the aerospace and automotive industries. The present work covers the study and comparison of metal-based regular honeycombs and functionally graded honeycombs. The latter encompass radial and linear/longitudinal gradients. Three repeating unit cells were studied: regular hexagons, Plateau and lotus. The structures were produced in aluminium using the laser powder bed fusion technique. Selected samples were submitted to a stress-relieving heat treatment. Numerical and experimental methods were used to assess the in-plane compressive properties. Finite element analysis was used to obtain the simulated force–displacement curves of each structure, allowing for the calculation of specific stiffness, absorbed energy and yield strength. The experimental method consisted of the compression of three specimens of three types of regular structures with and without stress-relieving heat treatment. The heat treatment reduced the yield strength and stiffness whilst increasing the ductility of the samples. The mechanical behaviour of the structures was found to depend upon a combined effect of the type of gradient, relative density, and unit cell structure. The results showed that an increase in the relative density would enhance the specific mechanical properties. The lotus configuration displayed the highest specific mechanical properties, as its geometry reduces the stress concentrations. The numerical results showed a reasonable match with the experimental results.

Experimental investigation of in-plane compressive and damping behavior anisotropic graded honeycomb structure

Quasi-static compressive behavior and energy absorption of novel cellular structures with varying cross-section dimension

In-plane and out-of-plane compressive properties of regular and graded cellular cores of sandwich panels fabricated by additive manufacturing

Modelling and characterization of novel honeycomb structures with mass gradient produced by additive manufacturing

Enhanced Out-Of-Plane Crushing Strength and Energy Absorption of In-Plane Graded Honeycombs

The compressive responses and failure behaviors of composite graded auxetic re-entrant honeycomb structure

Effect of gradient structure on additively manufactured auxetic and hybrid auxetic structure for energy absorption applications

Numerical modeling of flatwise energy absorption behavior of 3D woven honeycomb composites with different cell structures

Flatwise compression behavior of 3D woven honeycomb composites

Flexural response of additively manufactured honeycomb sandwich structures with continuous density-gradient variations

Mechanical Behavior of 3D-Printed Thickness Gradient Honeycomb Structures

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

A novel gradient negative stiffness honeycomb for recoverable energy absorption

In-Plane Elastic Properties of 3D-Printed Graded Hierarchical Hexagonal Honeycombs

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Dynamic Response and Energy Absorption Characteristics of a Three-Dimensional Re-Entrant Honeycomb

Modularizing honeycombs for enhancement of strength and energy absorption

Fabrication, design, and optimization of hierarchical composite Kagome honeycomb sandwich structure under uniaxial compression

Review: 3D woven honeycomb composites

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

In-plane compressive behavior of a novel self-similar hierarchical honeycomb with design-oriented crashworthiness