Abstract:Combining exceptional crushing strength of hollow glass microspheres (HGM) with reinforcing properties of carbon nanotubes as well as carbon fibres with epoxy resins results in a design poised to meet the demand for advanced, lightweight and high strength materials required in a variety of industries, such as aerospace and automotive, particularly, in the manufacture of composite rocket motor casings. In this study, unidirectional laminates of HGM/multi-walled CNTs (MWCNTs)/carbon-epoxy (CE) composites (samples nomenclature A–F) of varying wt.% of HGM and constant 0.1 wt.% of MWCNTs by filament winding technique were fabricated and subsequently cured. The HGM (iM16K) was varied as 0.2, 0.4, 0.6, 0.8, 1.0 wt.% by maintaining a constant concentration of 0.1 wt.% of MWCNTs. The hardener, fine hard (FH5200) was utilized in combination with epoxy resin (Epofine 1555). The epoxy resin was heated to 60°C after the fillers were added. Thermogravimetric analysis, differential mechanical analyzer and thermal mechanical analyzer were used to estimate the thermal stability, glass transition temperature and coefficient of thermal expansion (CTE), respectively. HGM and MWCNTs dispersion in the fracture samples caused by transverse tensile loading was examined using scanning electron microscopy. The effect of variation of HGM and 0.1 wt.% constant MWCNTs on tensile and compressive properties in transverse fibre directions of these composites has been investigated. Transverse tensile strength and tensile modulus were improved by 29.07 and 12.33%, respectively, up on the addition of 0.2 wt.% of HGM and 0.1 wt.% of MWCNTs in CE composite. The other findings indicated that > 0.2 wt.% HGM along with constant concentration of MWCNTs had decreasing effect on transverse tensile strength, modulus and compressive strength. The MWCNTs agglomeration was identified as the cause of these mechanical property degradations. The addition of HGM and MWCNTs decreased the CTE of the composite and increased the glass transition temperature as HGM limits the thermal motions of the epoxy polymer chain's molecular segments. The HGM/MWCNTs/CE composite was shown to be thermally stable up to 310°C.

Processing of Hollow Glass Microspheres (HGM) filled Epoxy Syntactic Foam Composites with improved Structural Characteristics

Effect of hollow glass microspheres on transverse properties of carbon fiber reinforced epoxy composites

Co-continuous hollow glass microspheres/epoxy resin syntactic foam prepared by vacuum resin transfer molding

Compressive properties of co-continuous hollow glass microsphere/epoxy resin syntactic foams prepared using resin transfer molding

Development and Mechanical Characterization of HGMS–EHS-Reinforced Hollow Glass Bead Composites

Hollow Glass Microspheres/Montmorillonite/Epoxy Sheet Molding Compound Composites With Low Density and Excellent Mechanical Properties

Hollow glass microspheres/phenolic syntactic foams with excellent mechanical and thermal insulate performance

Enhanced energy absorption and microstructural studies on hollow glass microsphere filled closed cell aluminum matrix syntactic foam

Influence of a batch of hollow glass microspheres with different strength grades on the compression strength of syntactic foam

Influence of Graphene Nano Fillers and Carbon Nano Tubes on the Mechanical and Thermal Properties of Hollow Glass Microsphere Epoxy Composites

Research on Properties of Epoxy Resin/Hollow Glass Microspheres Foam Materials

Effect of compound coupling agent treatment on mechanical property and water absorption of hollow glass microspheres/epoxy composite

Preparation and Properties of Hollow Glass Microspheres/Dicyclopentadiene Phenol Epoxy Resin Composite Materials

Enhanced Mechanical and Thermal Properties in Epoxy-Based Glass Fabric Composites via Nano Silica Integration

Lightweight epoxy foams prepared with arranged hollow-glass-microspheres/epoxy hollow spheres

Investigation of mechanical properties of multi-walled carbon nanotubes/hollow glass microspheres – carbon fibre-reinforced epoxy composites in transverse fibre directions

Epoxy-Glass Microballoon Syntactic Foams: Rheological Optimization of the Processing Window

On Lightweight Shape Memory Vitrimer Composites

Mechanical, tribological, and surface morphological studies on the effects of hybrid ilmenite and silicon dioxide fillers on glass fibre reinforced epoxy composites

Effect of graphene/silicon dioxide fillers addition on mechanical and thermal stability of epoxy glass fibre composite

Epoxy resin/hollow glass microspheres composite materials with low dielectric constant and excellent mechanical performance