Abstract:Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid-solution range. The solid-solution range, which is reduced at higher current by the rate of transfer of the working ion across electrode/electrolyte interfaces and within a host, limits the amount of charge per electrode formula unit that can be transferred over the time Δt = Δt(I). Moreover, the difference between energies of the LUMO and the HOMO of the electrolyte, i.e., electrolyte window, determines the maximum voltage for a long shelf and cycle life. The maximum stable voltage with an aqueous electrolyte is 1.5 V; the Li-ion rechargeable battery uses an organic electrolyte with a larger window, which increase the density of stored energy for a given Δt. Anode or cathode electrochemical potentials outside the electrolyte window can increase V, but they require formation of a passivating surface layer that must be permeable to Li(+) and capable of adapting rapidly to the changing electrode surface area as the electrode changes volume during cycling. A passivating surface layer adds to the impedance of the Li(+) transfer across the electrode/electrolyte interface and lowers the cycle life of a battery cell. Moreover, formation of a passivation layer on the anode robs Li from the cathode irreversibly on an initial charge, further lowering the reversible Δt. These problems plus the cost of quality control of manufacturing plague development of Li-ion rechargeable batteries that can compete with the internal combustion engine for powering electric cars and that can provide the needed low-cost storage of electrical energy generated by renewable wind and/or solar energy. Chemists are contributing to incremental improvements of the conventional strategy by investigating and controlling electrode passivation layers, improving the rate of Li(+) transfer across electrode/electrolyte interfaces, identifying electrolytes with larger windows while retaining a Li(+) conductivity σ(Li) > 10(-3) S cm(-1), synthesizing electrode morphologies that reduce the size of the active particles while pinning them on current collectors of large surface area accessible by the electrolyte, lowering the cost of cell fabrication, designing displacement-reaction anodes of higher capacity that allow a safe, fast charge, and designing alternative cathode hosts. However, new strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions (e.g. sulfur) by liquid cathodes that may contain flow-through redox molecules, or by catalysts for air cathodes; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies.

Research status and perspectives of rechargeable Li-CO2 battery

Recent Advances In Rechargeable Li-Co2 Batteries

Progress in Research on Li–CO2 Batteries: Mechanism, Catalyst and Performance

Recent Advances in Rechargeable Li–CO2 Batteries

Li-CO2 and Na-CO2 Batteries: Toward Greener and Sustainable Electrical Energy Storage

Recent progress and prospects of Li-CO2 batteries: Mechanisms, catalysts and electrolytes

Mechanistic understanding of CO2 reduction and evolution reactions in Li-CO2 batteries

A review of lithium-O2/CO2 and lithium-CO2 batteries: Advanced electrodes/materials/electrolytes and functional mechanisms

Materials for Advanced Li-O2 Batteries: Explorations, Challenges and Prospects

Mechanistic Insights into the Discharge Processes of Li−CO2 Batteries

Approaching Splendid Catalysts for Li-CO2 Battery from the Theory to Practical Designing: A Review

Recent advances and future perspectives of two-dimensional materials for rechargeable Li-O2 batteries

Fundamental Understanding of Nonaqueous and Hybrid Na–CO2 Batteries: Challenges and Perspectives

Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries

The Li-Ion Rechargeable Battery: A Perspective

Atomic Design of Bidirectional Electrocatalysts for Reversible Li-CO2 Batteries

Roadmap for rechargeable batteries: present and beyond

Aprotic Lithium-Carbon Dioxide Batteries: Reaction Mechanism and Catalyst Design

Mo 2 C / CNT : an Efficient Catalyst for Rechargeable Li – CO 2 Batteries

Designs and applications of multi-functional covalent organic frameworks in rechargeable batteries

Recent progress in COF-based electrode materials for rechargeable metal-ion batteries