Abstract:Asphalt concrete (AC) density serves as a critical criterion for quality control and quality assurance in asphalt pavement construction. Current non-destructive testing (NDT) approaches have shown potential for AC density measurement, but they present disadvantages such as inefficiency and unstable accuracy. This paper developed a novel NDT approach for AC density measurement based on non-contact interdigital coplanar capacitive sensor (ICCS). The feasibility of this approach was evaluated through both numerical and experimental validations. Firstly, the theoretical model of non-contact ICCS for AC density measurement was established based on conformal mapping technique, partial capacitance technique, and dielectric mixing model. Secondly, numerical simulations were performed to validate the developed theoretical model under two scenarios. Thirdly, laboratory experiments were conducted to measure capacitance data and predict density for three common types of ACs. Finally, the error of non-contact ICCS was discussed and compared with that of other NDT instruments. The results indicated that the developed theoretical model could establish the relationship between AC density and capacitance value, which provided the basis for AC density measurement using non-contact ICCS. It was also observed that the capacitance data obtained by the proposed model closely matched those computed by numerical simulations. The maximum errors between theoretical and numerical data were 4.10% and 1.08% for two cases respectively, which proved the feasibility of the theoretical model. Furthermore, experimental results indicated that the capacitance value of AC specimens increased by about 1 pF as the rolling time increases due to a decrease in the volume of air in AC, which reaffirms the validity of AC density measurement using non-contact ICCS. Additionally, the non-contact ICCS demonstrated excellent accuracy with a maximum error of 6.69%, which is comparable to the current mainstream NDT approaches. And it has the advantages of lower cost, simpler data processing and higher efficiency. The findings of this paper offer a new and reliable method and tool for non-destructive and large-scale AC density measurement.

Development of a Numerical Model to Predict the Dielectric Properties of Heterogeneous Asphalt Concrete

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Prediction of Field Aging Gradient in Asphalt Pavements

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

Research on Dielectric Properties of Asphalt Concrete with GPR

Composite Dielectric Model of Asphalt Mixtures Considering Mineral Aggregate Gradation

Experimental Research On Dielectric Constant Model For Asphalt Concrete Material

Prediction Model of Asphalt Content of Asphalt Mixture Based on Dielectric Properties

Theoretical Development and Validation of Asphalt Concrete Density Measurement Using Non-Contact Interdigital Coplanar Capacitive Sensor

Three-Dimensional Meso-Structure-Based Model for Evaluating the Complex Permittivity of Asphalt Concrete

Dielectric Model of Asphalt Pavement Materials Towards the Future Electrified Road

Estimation of density and moisture content in asphalt mixture based on dielectric property

Development of an FEM-DEM Model to Investigate Preliminary Compaction of Asphalt Pavements

Real-Time Asphalt Pavement Layer Thickness Prediction Using Ground-Penetrating Radar Based on a Modified Extended Common Mid-Point (XCMP) Approach

Three-Dimensional Orthorectified Simulation and Ground Penetrating Radar Detection of Interlayer Bonding Condition in Asphalt Pavements

Experimental and Numerical Study of Asphalt Material Geospatial Heterogeneity with Intelligent Compaction Technology on Roads

Application of Ground Penetrating Radar to Estimate Subgrade Soil Density

Low Compaction Level Detection of Newly Constructed Asphalt Pavement Based on Regional Index