Abstract:This study conducted dynamic triaxial tests on a typical poured asphalt concrete material of core walls in Xinjiang, exploring the dynamic characteristics of poured asphalt concrete under various confining pressures, principal stress ratios, and vibration frequencies. On this basis, the dynamic constitutive relationship of poured asphalt concrete was investigated using the Hardin-Drnevich model. The results indicate that under different confining pressures, principal stress ratios, and vibration frequencies, the variation patterns of the backbone lines of dynamic stress-strain of poured asphalt concrete are basically identical, consistent with a hyperbolic curve. The confining pressure and principal stress ratio significantly affect the backbone line of dynamic stress-strain. By comparison, frequency has a minimal effect. The changing trends of dynamic elasticity modulus and damping ratio of poured asphalt concrete under various factors are almost the same. When the material has high dynamic stress and strain, the hysteresis loop is large. When the curve of the damping ratio becomes flat, the asymptotic constant can be used as the maximum damping ratio. The relationship between the reciprocal of the dynamic elasticity modulus and the dynamic strain of poured asphalt concrete exhibits a linear distribution. Under different ratios of confining pressure to principal stress, there are large discrepancies between the calculated values from the formula and the experimental fitting values of the maximum dynamic elasticity modulus, and the maximum relative errors reach 16.65% and 18.15%, respectively. Therefore, the expression for the maximum dynamic elasticity modulus was modified, and the calculated values using the modified formula were compared with the experimental fitting values. The relative errors are significantly reduced, and the maximum relative errors are 3.02% and 2.04%, respectively, in good agreement with the fitting values of the experimental data. The findings of this article render a theoretical basis and reference for the promotion and application of poured asphalt concrete.

Experimental Research On Dielectric Constant Model For Asphalt Concrete Material

Research on Dielectric Properties of Asphalt Concrete with GPR

Development of a Numerical Model to Predict the Dielectric Properties of Heterogeneous Asphalt Concrete

Composite Dielectric Model of Asphalt Mixtures Considering Mineral Aggregate Gradation

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Theoretical modeling on the temperature-dependent dielectric properties of concrete pavement materials

Experimental research on the relationship between dielectric constant and compressive strength of cement concrete materials

Dielectric Model of Asphalt Pavement Materials Towards the Future Electrified Road

Ground Penetrating Radar Electromagnetic Waves Simulation of Pavement Model with Pavement Material's Inhomogeneous Dielectric Parameter

Prediction Model of Asphalt Content of Asphalt Mixture Based on Dielectric Properties

Three-Dimensional Meso-Structure-Based Model for Evaluating the Complex Permittivity of Asphalt Concrete

Predicting the Dielectric Properties Based on Micromechanical Modeling for Asphalt Mastics

Theoretical Analyses and Experimental Research on A Cement Concrete Dielectric Model

Research on Multiple-Factor Dynamic Constitutive Model of Poured Asphalt Concrete

Refined Modeling of Heterogeneous Medium for Ground-Penetrating Radar Simulation

Three-dimensional Microstructure Based Model for Evaluating the Coefficient of Thermal Expansion and Contraction of Asphalt Concrete

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Three-Dimensional Orthorectified Simulation and Ground Penetrating Radar Detection of Interlayer Bonding Condition in Asphalt Pavements

Dielectric measurement by open-ended coaxial line for hot-mix asphalt roads: From laboratory test to on-site investigation

Fatigue Resistance of RCA Modified Asphalt Based on Dielectric Properties

Real-Time Asphalt Pavement Layer Thickness Prediction Using Ground-Penetrating Radar Based on a Modified Extended Common Mid-Point (XCMP) Approach