Abstract:Bubble aeration has been widely applied in water/wastewater treatment, however its low gas utilization rate results in high energy consumption. Application of micro-nanobubbles (MNB) has emerged as a process with the potential to significantly increase gas utilisation due to their high relative surface area and high gas-liquid mass transfer efficiency. In this study, we demonstrate through calibrated models that MNB of an optimum bubble size can shrink and burst at or below the water surface enabling (1) all encapsulated gas to thoroughly dissolve in water, and (2) the bursting of nanobubbles to potentially generate free radicals. Through the understanding of MNB dimensional characteristics and bubble behaviour in water, a dynamic model that integrated force balance (i.e. buoyancy force, gravity, drag force, Basset force and virtual mass force), and mass transfer was developed to describe the rising velocity and radius variation of MNB along its upward trajectory. Unlike for conventional millimetre-sized bubbles, intensive gas dissolution of MNBs led to radius reduction for small bubbles, while a large initial radius triggers bubble swelling. The initial water depth was also crucial, where greater depth could drive the potential for bubble shrinkage so that they were more liable to contract. For example, the optimum bubble size of air (42–194 μm) and oxygen (127–470 μm) MNB that could achieve complete gas transfer (100% gas utilisation) for a range of specific water depths (0.5–10 m) were calculated. The modelling results for microbubbles (10–530 μm) were well validated by the experimental data (R 2 >0.85). However, the validation of the modelling results for nanobubble (<1 μm) aeration requires further study due to a lack of available empirical data. In this study, the proposed model and analysis provided new insights into understanding bubble dynamics in water and offered fundamental guidance for practitioners looking to upgrade bubble aeration system.

Micro Bubble Generation with Pressurized Droplet from Ultra Fine Bubble Water and Its Cleaning Effect

Experimental Analysis of Initiation Mechanism of Bubbles in Ultra-Clean Pumps Circulating Hydrogen Peroxide

Generation of Ultrafine Bubbles in Water by Repeated Pressurization and Depressurization

Atomic Force Microscopy Study of Non-DLVO Interactions Between Drops and Bubbles.

Development of microbubble generation method

Application research of micro and nano bubbles in water pollution control

Fine soil particle aggregation in ultra-fine bubble irrigated paddy fields

Effects of Gas Type, Oil, Salts and Detergent on Formation and Stability of Air and Carbon Dioxide Bubbles Produced by Using a Nanobubble Generator

Fundamental study on the growth process of interfacial microbubbles in an air-supersaturated solution

High-Performance Ultrafine Bubble Aeration on Janus Aluminum Foil Prepared by Laser Microfabrication

The effect of preparation time and aeration rate on the properties of bulk micro-nanobubble water using hydrodynamic cavitation

Environment-friendly surface cleaning using micro-nano bubbles

ENHANCEMENT MECHANISM OF OZONATION BY MICROBUBBLES

Degreasing of Solid Surfaces by Microbubble Cleaning

Development of a New Microbubble System and Its Performance

Emission Characteristics of Aerosols Generated during the Micro-Nano Bubble Aeration Process in Wastewater

Micro and nano-sized bubbles for sanitation and water reuse: from fundamentals to application

A modelling approach to explore the optimum bubble size for micro-nanobubble aeration

Fundamental Properties of Microbubble in Semiconductor Cleaning Technology

Characteristics of micro-nano bubbles and potential application in groundwater bioremediation.

Microbubble Generation in Organic Solvents by Porous Membranes with Different Membrane Wettabilities