Abstract:When conducting retreat mining in segmented coal pillars, the dynamic evolution of stress and overlying strata structure is more complex than conventional working faces due to the influence of adjacent working faces. Understanding and mastering the dynamic evolution patterns of overlying strata structure after retreat mining in segmented coal pillar working faces is essential for guiding the safe recovery of coal pillar resources under similar conditions. Through statistical analysis of the types of residual coal and the mining techniques, the current research status of residual coal mining system in China has been summarized. Based on the safety recovery technology system for multi-type residual coal pillar resources at Zhaogu No.2 Mine, this paper focuses on narrow coal pillar working faces in sections with fully mined-out areas on both sides. By using research methods such as on-site measurement, theoretical analysis, numerical simulation, and engineering experiments, starting from the stress state analysis and evolution law of coal seam mining, the dynamic evolution law of the overlying rock structure of sectional coal pillars has been mastered. On this basis, a stress arch mechanical model of the mining area is constructed, and the working resistance of the support is calculated and determined, ensuring the safe recovery of the working face. The research results show that before the backfilling of the sectional coal pillar working face, the working face is affected by the overlapping mining of the goaf on both sides, presenting a "bimodal" stress distribution pattern, with a stress concentration coefficient between 1.78 and 3.2. After the extraction of segmented coal pillars, stress arches consisting of high-stress zones form along both the strike and dip of the working face. The structural support provided by stress arches undergoes a dynamic evolution process of "formation-development-elevation-stabilization" as the working face advances. Following the instability and rupture of the lower basic roof hinge structure, the stress-bearing structure shifts to the higher basic roof, continuing to provide support for the surrounding rock stress in the mining space of the working face. A stress arch mechanical model for the dip and strike of the mining area is constructed , and the shape characteristics of the overlying rock stress arch in the coal pillar working face is mastered. Based on the stress distribution law and stress arch evolution characteristics of the surrounding rock of the coal pillar working face, the maximum working resistance of the support in the working face is theoretically calculated to be 9153.48kN. Compared with the measured mine pressure data, the selected support effectively ensures the safety production of the working face.

Field and Simulation Studies for Mechanised Depillaring below Incompetent Geological Formations of an Indian Coal Mine

Cable-bolting-based semi-mechanised depillaring of a thick coal seam

Performance of a coal pillar at deeper cover: Field and simulation studies

Development of empirical model for strength estimation of irregular-shaped-heightened-rib/snook for mechanised depillaring

Hydro-Mechanically Coupled Numerical Modelling of Protective Water Barrier Pillars in Underground Coal Mines in India

Underground Coal Pillar Extraction Under Shale Roof and Caved Goaf of Upper Lying Seam in Raniganj Coalfields

Impact of In-Seam Dirt Bands on the Performance of Surface Miners in Coal Mines

Mechanical behavior of coal under different mining rates: A case study from laboratory experiments to field testing

Support design in underground coal mines using modified rock mass classification system (RMRdyn) for enhanced safety– an approach from stable and failed roof cases

Movement and deformation characteristics of overlying rock mass in deep coal seam

Breaking law of overburden rock and key mining technology for narrow coal pillar working face in isolated island

Geomechanical Model Experiment Research on the Automatically Formed Roadway Without Pillars in a Kilometer-Deep Coal Mine

Research on overburden structural characteristics and support adaptability in cooperative mining of sectional coal pillar and bottom coal seam

Comprehensive Study of Strata Movement Behavior in Mining a Longwall Top Coal Caving Panel of a Composite Coal Seam with Partings

A Field Study Implementing New Monitoring Technology for Roof Caving and Systematic Monitoring for Gob-Side Entry Retaining via Roof Cutting in Underground Coal Mining

Performance evaluation of continuous miner based underground mine operation system: An OEE based approach

Study on the Instability Mechanism of Coal and Rock Mining under a Residual Coal Pillar in Gently Inclined Short-Distance Coal Seam with the Discrete Element

Analysis Of Overlying Strata Movement And Behaviors In Caving And Solid Backfilling Mixed Coal Mining

Multi-method joint monitoring study on strata behavior in shallow seam mining under bedrock gully

Research on Roof Weighting Mechanism of Coal Pillar Mining in Shallow Buried Closely Spaced Multi-seams

Research on Multi-Physical Field Characteristics of Deep Coal Seam Mining Based on the Rock-Coal-Rock Model