Abstract:Rechargeable lithium–sulfur batteries (LSBs) have caused widespread concern because of their high theoretical energy density and environmental benefits. However, LSBs accompany a series of phase transitions of which occur significant volume changes during charging and discharging, which severely reduce the lifetimes of LSBs. In this study, a supramolecular eco-binder with in situ-cross-linking is investigated to extend the charge–discharge cycle of LSBs. Specifically, a vegetable-oil-based cationic waterborne polyurethane polymer with phytic acid (WPUP) is developed as an eco-binder for sulfur cathodes. A low-viscosity WPUP is used in the electrode fabrication process to achieve homogeneous, dense coating of the active materials. The WPUP participates in an in situ covalent cross-linking reaction to produce a three-dimensional network with excellent mechanical properties. This ensures robust adhesion and much shorter ion- and electron-transfer paths. The resultant sulfur cathodes compose of high initial discharge capacity of 1051 mAh g–1 at 0.5 C, promising long-term battery cycling stability (632 mAh g–1 after 600 charge/discharge cycles at 0.5 C), and high rate cycling performance (634 mAh g–1 at 4 C). As proof-of-concept, a Li–S full cell is fabricated with a 350% oversized lithium anode. It provides a good capacity of 1.3 mA h cm–2 and high capacity retention of 99.83% per cycle over 300 cycles. This binder-design strategy will be important in developing high-capacity and long cycle stable LSBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00207?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00207</a>.FTIR, viscosity, CV profiles, voltage profiles, the first discharge–charge profiles of the binders and their S cathodes (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00207/suppl_file/ae1c00207_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Lithiated Carboxylated Nitrile Butadiene Rubber with Strong Polysulfide Immobilization Ability as a Binder for Improving Lithium-Sulfur Battery Performance

A Multi Functional Binder with Lithium Ion Conductive Polymer and Polysulfide Absorbents to Improve Cycleability of Lithium–sulfur Batteries

Preparation and Evaluation of a New Water-Based Binder for Sulfur Cathode in Lithium–Sulfur Batteries

Bifunctional Binder Enables Controllable Deposition of Polysulfides for High-Loading Li-S Battery

In-situ Polymerized Cross-Linked Binder for Cathode in Lithium-Sulfur Batteries

Exploiting a Robust Biopolymer Network Binder for an Ultrahigh-Areal-capacity Li–S Battery

Water‐Soluble Cross‐Linking Functional Binder for Low‐Cost and High‐Performance Lithium–Sulfur Batteries

In Situ-Cross-linked Supramolecular Eco-Binders for Improved Capacity and Stability of Lithium–Sulfur Batteries

In-situ crosslinked binder for high-stability S cathodes with greatly enhanced conduction and polysulfides anchoring

Regulating the Molecular Interactions in Polymer Binder for High-Performance Lithium–Sulfur Batteries

Highly Elastic and Polar Block Polymer Binder Enabling Accommodation of Volume Change and Confinement of Polysulfide for High-Performance Lithium–Sulfur Batteries

A Conductive Binder Based on Mesoscopic Interpenetration with Polysulfides Capturing Skeleton and Redox Intermediates Network for Lithium Sulfur Batteries

Highly integrated sulfur cathodes with strong sulfur/high-strength binder interactions enabling durable high-loading lithium–sulfur batteries

A New Hydrophilic Binder Enabling Strongly Anchoring Polysulfides for High‐Performance Sulfur Electrodes in Lithium‐Sulfur Battery

Bioinspired Binders Actively Controlling Ion Migration and Accommodating Volume Change in High Sulfur Loading Lithium–Sulfur Batteries

Polycation Binders: an Effective Approach Toward Lithium Polysulfide Sequestration in Li–S Batteries

3D Adsorption‐Mediator Network Polymer Binders Improve Redox Kinetics and Flame Retardant Performance for High Loading Lithium–Sulfur Batteries

Multifunctional Binder Designs for Lithium-Sulfur Batteries

Multifunctional Cross-Linked Polymer-Laponite Nanocomposite Binder for Lithium-Sulfur Batteries

Impact of the Mechanical Properties of a Functionalized Cross-linked Binder on the Longevity of Li-S Batteries.

Dual Cross-Linked Multifunctional Binder for High-Performance Lithium–Sulfur Batteries