Abstract:Rechargeable lithium–sulfur batteries (LSBs) have caused widespread concern because of their high theoretical energy density and environmental benefits. However, LSBs accompany a series of phase transitions of which occur significant volume changes during charging and discharging, which severely reduce the lifetimes of LSBs. In this study, a supramolecular eco-binder with in situ-cross-linking is investigated to extend the charge–discharge cycle of LSBs. Specifically, a vegetable-oil-based cationic waterborne polyurethane polymer with phytic acid (WPUP) is developed as an eco-binder for sulfur cathodes. A low-viscosity WPUP is used in the electrode fabrication process to achieve homogeneous, dense coating of the active materials. The WPUP participates in an in situ covalent cross-linking reaction to produce a three-dimensional network with excellent mechanical properties. This ensures robust adhesion and much shorter ion- and electron-transfer paths. The resultant sulfur cathodes compose of high initial discharge capacity of 1051 mAh g–1 at 0.5 C, promising long-term battery cycling stability (632 mAh g–1 after 600 charge/discharge cycles at 0.5 C), and high rate cycling performance (634 mAh g–1 at 4 C). As proof-of-concept, a Li–S full cell is fabricated with a 350% oversized lithium anode. It provides a good capacity of 1.3 mA h cm–2 and high capacity retention of 99.83% per cycle over 300 cycles. This binder-design strategy will be important in developing high-capacity and long cycle stable LSBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00207?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00207</a>.FTIR, viscosity, CV profiles, voltage profiles, the first discharge–charge profiles of the binders and their S cathodes (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00207/suppl_file/ae1c00207_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Multifunctional Cross-Linked Polymer-Laponite Nanocomposite Binder for Lithium-Sulfur Batteries

A Multi Functional Binder with Lithium Ion Conductive Polymer and Polysulfide Absorbents to Improve Cycleability of Lithium–sulfur Batteries

In-situ Polymerized Cross-Linked Binder for Cathode in Lithium-Sulfur Batteries

Regulating the Molecular Interactions in Polymer Binder for High-Performance Lithium–Sulfur Batteries

Exploiting a Robust Biopolymer Network Binder for an Ultrahigh-Areal-capacity Li–S Battery

Dual Cross-Linked Multifunctional Binder for High-Performance Lithium–Sulfur Batteries

One-Pot Synthesis of a Copolymer Micelle Crosslinked Binder with Multiple Lithium-Ion Diffusion Pathways for Lithium-Sulfur Batteries.

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

In-situ crosslinked binder for high-stability S cathodes with greatly enhanced conduction and polysulfides anchoring

Bifunctional Binder Enables Controllable Deposition of Polysulfides for High-Loading Li-S Battery

An eco-friendly composite binder with robust network and strong affinity for long-lifespan high-loading Li-S batteries

Multifunctional binder capable of promoting the reaction dynamics of wide temperature operable lithium-sulfur battery

Bioinspired Binders Actively Controlling Ion Migration and Accommodating Volume Change in High Sulfur Loading Lithium–Sulfur Batteries

A Conductive Binder Based on Mesoscopic Interpenetration with Polysulfides Capturing Skeleton and Redox Intermediates Network for Lithium Sulfur Batteries

Suppressing Polysulfide Shuttling in Lithium–Sulfur Batteries via a Multifunctional Conductive Binder

A three-dimensional crosslinked chitosan sulfate network binder for high-performance Li–S batteries

In Situ-Cross-linked Supramolecular Eco-Binders for Improved Capacity and Stability of Lithium–Sulfur Batteries

Water‐Soluble Cross‐Linking Functional Binder for Low‐Cost and High‐Performance Lithium–Sulfur Batteries

Multifunctional Binder Designs for Lithium-Sulfur Batteries

In Situ Interweaved High Sulfur Loading Li-S Cathode by Catalytically Active Metalloporphyrin Based Organic Polymer Binders

Design and Synthesis of Multi‐Functional Polymeric Binders for High‐performance Lithium‐Sulfur Batteries Based on Ring Opening Polymerization of Thiolactone