Preshaping clear glass at low temperatures

Rebecca Dylla-Spears

DOI: https://doi.org/10.1126/science.abg7657

IF: 56.9

2021-04-09

Science

Abstract:Pelletized glass-forming composites enable rapid injection molding and facile binder recovery

multidisciplinary sciences

What problem does this paper attempt to address?

High-throughput injection molding of transparent fused silica glass

Markus Mader,Oliver Schlatter,Barbara Heck,Andreas Warmbold,Alex Dorn,Hans Zappe,Patrick Risch,Dorothea Helmer,Frederik Kotz,Bastian E Rapp

DOI: https://doi.org/10.1126/science.abf1537

IF: 56.9

2021-04-09

Science

Abstract:Glass is one of the most relevant high-performance materials that has the benefit of a favorable environmental footprint compared with that of other commodity materials. Despite the advantageous properties of glasses, polymers are often favored because they can be processed using scalable industrial replication techniques like injection molding (IM). Glasses are generally processed through melting, which is both energy intensive and technologically challenging. We present a process for glassworks using high-throughput IM of an amorphous silicon dioxide nanocomposite that combines established process technologies and low-energy sintering. We produce highly transparent glass using classical IM and sintering, allowing for a potentially substantial reduction in energy consumption. Our strategy merges polymer and glass processing, with substantial implications for glass utilization.
Development of a Polyethylene Glycol/Polymethyl Methacrylate-Based Binder System for a Borosilicate Glass Filler Suitable for Injection Molding

Martin Zürn,Annika Schrage,Steffen Antusch,Nicole Bohn,Peter Holzer,Thomas Hanemann

DOI: https://doi.org/10.3390/ma17061396

IF: 3.4

2024-03-20

Materials

Abstract:Powder injection molding is an established, cost effective and often near-net-shape mass production process for metal or ceramic parts with complex geometries. This paper deals with the extension of the powder injection molding process chain towards the usage of a commercially available borosilicate glass and the realization of glass compounds with huge densities. The whole process chain consists of the individual steps of compounding, molding, debinding, and sintering. The first part, namely, the search for a suitable feedstock composition with a very high solid load and reliable molding properties, is mandatory for the successful manufacture of a dense glass part. The most prominent feature is the binder composition and the related comprehensive rheological characterization. In this work, a binder system consisting of polyethylene glycol and polymethylmethacrylate with stearic acid as a surfactant was selected and its suitability for glass injection molding was evaluated. The influence of all feedstock components on processing and of the process steps on the final sintered part was investigated for sintered glass parts with densities around 99% of the theoretical value.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Low-Temperature Additive Manufacturing of Silica Glass Composites

Bradley Duncan,Devon Beck,Paul Miller,Ryan Benz,Keri Ledford,Avery Rosh-Gorsky,Melissa Smith

DOI: https://doi.org/10.1021/acsmaterialslett.3c01510

IF: 11.4

2024-01-25

ACS Materials Letters

Abstract:Additive manufacturing has revolutionized the ability to prototype and manufacture complex structures. A shortcoming of many additive manufacturing processes is the reliance on organic materials that are not durable long-term, in many cases being both chemically and thermally unstable. Conversely, additive manufacturing approaches that feature more-robust inorganic materials require expensive and high-temperature (>1000 °C) processing steps, which often limits their final use to one single function. Here, we describe a materials platform that enables the additive manufacturing of inorganic glass composite structures at low temperatures (<250 °C), with chemical and thermal stability comparable to traditional silicon dioxide-based materials. Due to the low temperature processing, a wide range of materials (dielectrics, metals, optical) can be embedded into the glass to create multifunctional glass structures. Since no specialized tooling is needed and the source materials are commercially available, we expect this approach to be easily adopted for prototyping glass/ceramic objects and structures.

materials science, multidisciplinary
Glass Molding for Microstructures

J. Shang,Bin Luo,Zhaoxi Su

DOI: https://doi.org/10.1109/INERTIAL53425.2022.9787759

2022-05-08

Abstract:This work proposes a glass molding technology for fabricating microstructures. In this method, a relatively higher pressure provided by the thermal decomposition of foaming agents at high temperatures replaces the atmospheric pressure in glass reflow process, which brings about microfabrication ability improvement. A silicon–glass-silicon stack wafer is formed by anodic bonding. The middle borosilicate glass (Type: Borofloat® 33) is driven into the cavities on the mold silicon wafer at high temperatures, forming microstructures. Using this glass molding technology, we have successfully demonstrated a wide variety of glass microstructures including rings, tuning forks, gears, etc.

Materials Science,Engineering
A technique for improving dispersion within polymer-glass composites using polymer precipitation

Reece N. Oosterbeek,Xiang C. Zhang,Serena M. Best,Ruth E. Cameron

DOI: https://doi.org/10.1016/j.jmbbm.2021.104767

2021-12-14

Abstract:Particulate reinforcement of polymeric matrices is a powerful technique for tailoring the mechanical and degradation properties of bioresorbable implant materials. Dispersion of inorganic particles is critical to achieving optimal properties, however established techniques such as twin-screw extrusion or solvent casting can have significant drawbacks including excessive thermal degradation or particle agglomeration. We present a facile method for production of polymer-inorganic composites that reduces the time at elevated temperature and the time available for particle agglomeration. Glass slurry was added to a dissolved PLLA solution, and ethanol was added to precipitate polymer onto the glass particles. Characterisation of parts formed by subsequent micro-injection moulding of composite precipitate revealed a significant reduction in agglomeration, with d0.9 reduced from 170 to 43 {\mu}m. This drastically improved the ductility ({\epsilon}B) from 7% to 120%, without loss of strength or stiffness. The method is versatile and applicable to a wide range of polymer and filler materials.

Soft Condensed Matter,Materials Science
Injection Molding of Magnesium Aluminate Spinel Nanocomposites for High‐Throughput Manufacturing of Transparent Ceramics

Markus Mader,Richard Prediger,Karl G. Schell,Gabriela Schmidt,Alex Dorn,Sophie Jenne,Sebastian Kluck,Leonhard Hambitzer,Manuel Luitz,Claudia Schwarz,Marcel Milich,Christian Greiner,Bastian E. Rapp,Frederik Kotz‐Helmer

DOI: https://doi.org/10.1002/advs.202204385

IF: 15.1

2022-09-21

Advanced Science

Abstract:The development of thermoplastic magnesium aluminate spinel (MAS) nanocomposites allows the fabrication of 3D, transparent MAS with single micron resolution using high‐throughput polymer injection molding. The injection molded nanocomposites are subsequently converted to dense and transparent MAS using debinding, pre‐sintering, and hot isostatic pressing. The injection molded MAS shows high optical transparency, low surface roughness, and high mechanical stability. Transparent ceramics like magnesium aluminate spinel (MAS) are considered the next step in material evolution showing unmatched mechanical, chemical and physical resistance combined with high optical transparency. Unfortunately, transparent ceramics are notoriously difficult to shape, especially on the microscale. Therefore, a thermoplastic MAS nanocomposite is developed that can be shaped by polymer injection molding at high speed and precision. The nanocomposite is converted to dense MAS by debinding, pre‐sintering, and hot isostatic pressing yielding transparent ceramics with high optical transmission up to 84 % and high mechanical strength. A transparent macroscopic MAS components with wall thicknesses up to 4 mm as well as microstructured components with single micrometer resolution are shown. This work makes transparent MAS ceramics accessible to modern high‐throughput polymer processing techniques for fast and cost‐efficient manufacturing of macroscopic and microstructured components enabling a plethora of potential applications from optics and photonics, medicine to scratch and break‐resistant transparent windows for consumer electronics.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Development of transparent, particle‐loaded photoresins for volumetric additive manufacturing of silica glass

Luke A. Myers,Johanna J. Schwartz,Martin P. De Beer,Rebecca L. Walton,Dominique H. Porcincula

DOI: https://doi.org/10.1002/pol.20230654

IF: 3.046

2024-01-13

Journal of Polymer Science

Abstract:Additive manufacturing of glass aims to change the paradigm of glass manufacturing by allowing for improved customization coupled with lower energy and post‐processing needs. Fabrication of glass via volumetric additive manufacturing (VAM) involves printing in a silica‐loaded photopolymer resin with subsequent thermal processing and adds additional advantages by allowing for rapid printing of parts with smooth surfaces and no supports. Previous work in glass VAM has demonstrated fabrication of optical quality microoptics with overall dimensions on the scale of tens of cubic millimeters. For applications requiring glass printed on the scale of cubic centimeters the rheology, scattering, and green part strength must be controlled via resin formulation. Here, we present insight into a novel glass photopolymer resin suitable for VAM and in the effect of tuning formulation on the ability to produce dense glass parts with volumes on the scale of cubic centimeters.

polymer science
Room‐Temperature Molding of Complex‐Shaped Transparent Fused Silica Lenses

Ya Xu,Xiaotong Du,Zhenhua Wang,Hua Liu,Peng Huang,Suet To,LiMin Zhu,Zhiwei Zhu

DOI: https://doi.org/10.1002/advs.202304756

IF: 15.1

2023-10-23

Advanced Science

Abstract:Abstract The high hardness, brittleness, and thermal resistance impose significant challenges in the scalable manufacturing of fused silica lenses, which are widely used in numerous applications. Taking advantage of the nanocomposites by stirring silica nanopowders with photocurable resins, the newly emerged low‐temperature pre‐shaping technique provides a paradigm shift in fabricating transparent fused silica components. However, preparing the silica slurry and carefully evaporating the organics may significantly increase the process complexity and decrease the manufacturing efficiency for the nanocomposite‐based technique. By directly pressing pure silica nanopowders against the complex‐shaped metal molds in minutes, this work reports an entirely different room‐temperature molding method capable of mass replication of complex‐shaped silica lenses without organic additives. After sintering the replicated lenses, fully transparent fused silica lenses with spherical, arrayed, and freeform patterns are generated with nanometric surface roughness and well‐reserved mold shapes, demonstrating a scalable and cost‐effective route surpassing the current techniques for the manufacturing of high‐quality fused silica lenses.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Emerging Techniques for Customized Fabrication of Glass

Xiaofeng Liu,Yuting Yang,Jianrong Qiu

DOI: https://doi.org/10.1016/j.nocx.2022.100114

2022-01-01

Journal of Non-Crystalline Solids X

Abstract:Inorganic glasses have been the one of the most important families of inorganic materials used by human society. The ability to fabricate glasses with customized shapes is of high significance for a diverse range of applications. We review the recent advances in the development of techniques for fabricating glass items with pre-designed geometries. Most of these methods are based on the high-temperature densification of the green parts, which are formed by the preshaping of the composites containing inorganic feedstock (e.g., SiO2) by molding, nanoimprinting and 3D printing, with resolutions down to the sub-micron level. These methods have also enabled the fabrication of multicomponent glass systems and the incorporation of traces of metal ions or nanoparticles as dopants with optical functionalities. In this review, these low-temperature routes are compared with the direct 3D printing route for the fabrication of glass by selective laser melting and fused deposition molding, which rely on high-temperature melting/sintering of glass powers or filaments. Finally, the benefits of different methods for fabricating glass in a customizable manner are discussed and potential future directions are highlighted.
Micro-structuring of glassy carbon for precision glass molding of binary diffractive optical elements

H. Herzig,J. Dukwen,K. Prater,S. Plöger,A. Hermerschmidt,T. Scharf

DOI: https://doi.org/10.1364/OME.6.003407

2016-11-01

Abstract:Precision glass molding is a more cost efficient process for the large volume manufacturing of highly complex optical surfaces than direct manufacturing. Glassy carbon (GC) molds are used for precision glass molding, because they can be operated at temperatures up to 2000°C. Used today mainly for manufacturing aspheric lenses, we consider here material technology for diffractive optical element (DOE). For diffractive optics the surface structuring is in the micrometer range and a surface roughness Ra lower than 20 nm is required. We introduce a reactive ion etching process with a titanium hard mask. Fused silica (FS) molds with identical optical functionality were fabricated for comparison. All molds were used for precision glass molding of a low Tg glass L-BAL42. We will compare GC and FS as mold materials in terms of quality and robustness. Optical performance measurements of the molded glass DOEs are shown and are in good agreement with the theoretical predictions. The results confirm that precision glass molding based on GC molds is a very promising technology to economically fabricate small structures in glass for DOEs.

Engineering,Physics,Materials Science
Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Tianbing He,Nevaf Ciftci,Volker Uhlenwinkel,Sergio Scudino

DOI: https://doi.org/10.3390/jmmp5010023

2021-03-09

Journal of Manufacturing and Materials Processing

Abstract:The critical cooling rate necessary for glass formation via melt solidification poses inherent constraints on sample size using conventional casting techniques. This drawback can be overcome by pressure-assisted sintering of metallic glass powders at temperatures above the glass transition, where the material shows viscous-flow behavior. Partial crystallization during sintering usually exacerbates the inherent brittleness of metallic glasses and thus needs to be avoided. In order to achieve high density of the bulk specimens while avoiding (or minimizing) crystallization, the optimal combination between low viscosity and long incubation time for crystallization must be identified. Here, by carefully selecting the time–temperature window for powder consolidation, we synthesized highly dense Zr48Cu36Ag8Al8 bulk metallic glass (BMG) with mechanical properties comparable with its cast counterpart. The larger ZrCu-based BMG specimens fabricated in this work could then be post-processed by flash-annealing, offering the possibility to fabricate monolithic metallic glasses and glass–matrix composites with enhanced room-temperature plastic deformation.
Toughening and Imparting Deconstructability to 3D‐Printed Glassy Thermosets with "Transferinker" Additives

K. Peter Qin,Abraham Herzog‐Arbeitman,Weizhong Zou,Saswata Chakraborty,Samantha L. Kristufek,Keith E. L. Husted,Guy D. Joly,Stephen L. Craig,Bradley D. Olsen,Jeremiah A. Johnson

DOI: https://doi.org/10.1002/adma.202406600

IF: 29.4

2024-09-13

Advanced Materials

Abstract:Transferinkers are cross‐linkers capable of undergoing degenerative chain transfer and new strand growth. Incorporating transferinkers into 3D printable photopolymer resins leads to improved tensile toughness and triggered chemical deconstructability. These properties result from a transferinker‐driven topological transition in network structure into one that can more effectively bear stress yet is also more easily depercolated via solvolysis. Thermoset toughness and deconstructability are often opposing features; simultaneously improving both without sacrificing other mechanical properties (e.g., stiffness and tensile strength) is difficult, but, if achieved, could enhance the usage lifetime and end‐of‐life options for these materials. Here, a strategy that addresses this challenge in the context of photopolymer resins commonly used for 3D printing of glassy, acrylic thermosets is introduced. It is shown that incorporating bis‐acrylate "transferinkers," which are cross‐linkers capable of undergoing degenerative chain transfer and new strand growth, as additives (5–25 mol%) into homemade or commercially available photopolymer resins leads to photopolymer thermosets with substantially improved tensile toughness and triggered chemical deconstructability with minimal impacts on Young's moduli, tensile strengths, and glass transition temperatures. These properties result from a transferinker‐driven topological transition in network structure from the densely cross‐linked long, heterogeneous primary strands of traditional photopolymer networks to more uniform, star‐like networks with few dangling ends; the latter structure more effectively bear stress yet is also more easily depercolated via solvolysis. Thus, transferinkers represent a simple and effective strategy for improving the mechanical properties of photopolymer thermosets and providing a mechanism for their triggered deconstructability.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High‐Resolution Structuring of Silica‐Based Nanocomposites for the Fabrication of Transparent Multicomponent Glasses with Adjustable Properties

Richard Prediger,Sebastian Kluck,Leonhard Hambitzer,Daniel Sauter,Frederik Kotz‐Helmer

DOI: https://doi.org/10.1002/adma.202407630

IF: 29.4

2024-09-03

Advanced Materials

Abstract:Photochemically curable silicate‐based nanocomposites containing photoreactive precursors allow transparent multicomponent glasses with adjustable properties to be fabricated. After lithographic structuring, the doped nanocomposites are thermally debinded and sintered in order to achieve full densification. This enables the production of complex structured, transparent multicomponent glasses that are difficult to realize using conventional methods. Silicate‐based multicomponent glasses are of high interest for technical applications due to their tailored properties, such as an adaptable refractive index or coefficient of thermal expansion. However, the production of complex structured parts is associated with high effort, since glass components are usually shaped from high‐temperature melts with subsequent mechanical or chemical postprocessing. Here for the first time the fabrication of binary and ternary multicomponent glasses using doped nanocomposites based on silica nanoparticles and photocurable metal oxide precursors as part of the binder matrix is presented. The doped nanocomposites are structured in high resolution using UV‐casting and additive manufacturing techniques, such as stereolithography and two‐photon lithography. Subsequently, the composites are thermally converted into transparent glass. By incorporating titanium oxide, germanium oxide, or zirconium dioxide into the silicate glass network, multicomponent glasses are fabricated with an adjustable refractive index nD between 1.4584–1.4832 and an Abbe number V of 53.85–61.13. It is further demonstrated that by incorporating 7 wt% titanium oxide, glasses with ultralow thermal expansion can be fabricated with so far unseen complexity. These novel materials enable for the first time high‐precision lithographic structuring of multicomponent silica glasses with applications from optics and photonics, semiconductors as well as sensors.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Additive Manufacturing of Silica Glass Using Laser Stereolithography with a Top-Down Approach and Fast Debinding

Chang Liu,Bin Qian,Xiaofeng Liu,Limin Tong,Jianrong Qiu

DOI: https://doi.org/10.1039/c8ra02428f

IF: 4.036

2018-01-01

RSC Advances

Abstract:Additive manufacturing of silica glass by stereolithography is a new technology. Improving the efficiency of this technology is an important issue. In this work, a stereolithography system using top-down approach and a compatible suspension for this approach was developed. The debinding behavior of the green part (the solidified suspension) was discussed in detail based on the results of thermogravimetric analysis and Fourier transform infrared absorption spectroscopy. A fast heat treatment within 16 hours was adopted for debinding and sintering of the green part which took only 1/3 of the time of previous report. Designed glassware which could not be processed by conventional technologies was manufactured in this way, and the products showed similar properties with fused silica, as confirmed by X-ray diffraction and UV-vis-IR spectrometer.
High‐Resolution Structuring of Silica‐Based Nanocomposites for the Fabrication of Transparent Multicomponent Glasses with Adjustable Properties (Adv. Mater. 44/2024)

Richard Prediger,Sebastian Kluck,Leonhard Hambitzer,Daniel Sauter,Frederik Kotz‐Helmer

DOI: https://doi.org/10.1002/adma.202470351

IF: 29.4

2024-11-03

Advanced Materials

Abstract:Multicomponent Glasses In article number 2407630 by Frederik Kotz‐Helmer and co‐workers, the fabrication of fully dense transparent binary and ternary multicomponent silicate glasses with adjustable optical and thermal properties starting from modified photocurable silica nanocomposites is demonstrated. In this innovative method, the dopants are introduced as a reactive part of the acrylate‐based binder matrix and can furthermore be combined with additional nanoparticles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Preparation of Glass-Infiltrated 3Y-Tzp/al2o3/glass Composites

XJ Sheng,H Xu,ZH Jin,YL Wang

DOI: https://doi.org/10.1016/j.matlet.2003.10.062

IF: 3

2004-01-01

Materials Letters

Abstract:3Y-TZP/Al2O3/glass composites that contain Al2O3 were investigated to make all-ceramic dental porcelain with low shrinkage and good mechanical properties via a melt-infiltration process. 3Y-TZP/Al2O3 matrixes with densities ranging from 60% to 70% of theoretical were formed after partially sintering. The matrix was infiltrated with a lanthanum borosilicate glass at 1200 °C for 4 h three times. The dimensional change of composites is dependent on the Al2O3 content. The shrinkage of composites decreases with the Al2O3 content. During the infiltrating, zirconia's phase transformation was found. Bending strength and fracture toughness of glass-infiltrated composites are 449.6 MPa and 5.9 MPa m1/2, respectively, and are relatively sensitive to the volume fraction of Al2O3 and partially sintering temperature.
Fabrication of Glass‐Ceramic 3D Micro‐Optics by Combining Laser Lithography and Calcination

Giedrius Balčas,Mangirdas Malinauskas,Maria Farsari,Saulius Juodkazis

DOI: https://doi.org/10.1002/adfm.202215230

IF: 19

2023-05-16

Advanced Functional Materials

Abstract:3D size and material rescaling: from polymer to glass‐ceramic. This perspective is an overview of a recent direction in optical 3D printing, where polymerization of crosslinkable materials and nanomaterial fillers can be guided to the final structures and new composites via high temperature annealing (HTA). Defining 3D nano/micro‐structures by ultrafast laser direct writing and tailoring their precursor composition with subsequent tunability of the final properties during 750–1500 °C HTA step takes place at the large surface‐to‐volume ratio conditions favoring efficient pyrolysis and calcination, which are required for exchange of chemical materials/gases between glass/ceramic phase and surrounding. Previously, unexplored inorganic material formation conditions in terms of fast thermal quenching, composition mixing and surface tension guided formation can be harnessed by glass making for creation of new materials endowed with preferable technical properties. An immediate application perspective for a high durability, integrated, and active 3D micro‐optics is foreseen.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Evaluation of mold materials for precision glass molding

Marcel Friedrichs,Tim Grunwald,Thomas Bergs

DOI: https://doi.org/10.1117/12.2526769

2019-06-28

Abstract:Driven by the wide range of applications in the fields of laser technology, biomedicine and consumer electronics, etc., the demand for high-quality lenses with complex geometries and small dimensions is rapidly rising. Since grinding and polishing of such lenses is neither practically nor economically viable, Precision Glass Molding (PGM) has become a popular production method. PGM is a replicative technology for producing high-precision optical lenses in medium or high volumes. During the one-cycle molding process, a glass preform is heated until the viscous state and afterwards pressed into the desired shape using two high-precise molding tools. This process permits the direct and efficient manufacture of high shape accuracy and surface quality optics without any mechanic post-processing step. The efficiency of PGM processes depend primarily on the lifetime of the high-precision molding tools. Therefore, various investigations focus on enhancing the molding tool lifetime. This work focuses on the evaluation of suitable mold materials for PGM, whereby different substrate materials as well as protective coatings are considered. At this, three different kinds of glass with varying molding temperature were investigated: common optical glass, infrared transmissive chalcogenide glass, and fused silica. The molding temperature of common optical glass ranges from 400C to 700C, whereas chalcogenide glass is molded at around 250C. Fused silica requires a more challenging molding temperature of about 1400C. Due to the varying molding temperatures, different mold materials can be evaluated for each of the investigated glasses.
A new approach to preparing bulk rapidly solidified metal/glass composites

Hongxing Zheng,Weizeng Ma,JianGuo Li

2003-01-01

Journal of optoelectronics and advanced materials

Abstract:The use of a new technique based on sol-gels and rapid undercooling, to prepare rapidly solidified metallic glass and metallic matrix composites was discussed. The technique consists of preparing gel solutions using the sol-gel technique and then mixing the metal powder and gel by ball milling. Directional composites are prepared by undercooling an extruded block in the middle undercooling range. The mechanical properties of the composites prepared by this technique were also discussed.
Realizing Translucency in Aluminosilicate Glass at Ultralow Temperature Via Cold Sintering Process

Jie Gao,Kangjing Wang,Wei Luo,Xiaowei Cheng,Yuchi Fan,Wan Jiang

DOI: https://doi.org/10.1007/s40145-022-0642-y

IF: 11.534

2022-01-01

Journal of Advanced Ceramics

Abstract:Glass with high visible-light transparency is widely considered as the most important optical material, which typically requires a processing temperature higher than 1000 °C. Here, we report a translucent aluminosilicate glass that can be prepared by cold sintering process (CSP) at merely 300 °C. After eliminating structural pores in hexagonal faujasite (EMT)-type zeolite by heat treatment, the obtained highly active nanoparticles are consolidated to have nearly full density by adding NaOH solution as liquid aids. However, direct densification of EMT powder cannot remove the structural pores of zeolite completely, leading to an opaque compact after the CSP. It is proved that the chemical reaction between the NaOH- and zeolite-derived powders is highly beneficial to dissolution-precipitation process during sintering, leading to the ultra-low activation energy of 27.13 kJ/mol. Although the addition of 5 M NaOH solution greatly promotes the densification via the reaction with aluminosilicate powder, lower or higher concentration of solvent can deteriorate the transmittance of glass. Additionally, the CSP-prepared glass exhibits a Vickers hardness of 4.3 GPa, reaching 60% of the reported value for spark plasma sintering (SPS)-prepared sample.

Preshaping clear glass at low temperatures

High-throughput injection molding of transparent fused silica glass

Development of a Polyethylene Glycol/Polymethyl Methacrylate-Based Binder System for a Borosilicate Glass Filler Suitable for Injection Molding

Low-Temperature Additive Manufacturing of Silica Glass Composites

Glass Molding for Microstructures

A technique for improving dispersion within polymer-glass composites using polymer precipitation

Injection Molding of Magnesium Aluminate Spinel Nanocomposites for High‐Throughput Manufacturing of Transparent Ceramics

Development of transparent, particle‐loaded photoresins for volumetric additive manufacturing of silica glass

Room‐Temperature Molding of Complex‐Shaped Transparent Fused Silica Lenses

Emerging Techniques for Customized Fabrication of Glass

Micro-structuring of glassy carbon for precision glass molding of binary diffractive optical elements

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Toughening and Imparting Deconstructability to 3D‐Printed Glassy Thermosets with "Transferinker" Additives

High‐Resolution Structuring of Silica‐Based Nanocomposites for the Fabrication of Transparent Multicomponent Glasses with Adjustable Properties

Additive Manufacturing of Silica Glass Using Laser Stereolithography with a Top-Down Approach and Fast Debinding

High‐Resolution Structuring of Silica‐Based Nanocomposites for the Fabrication of Transparent Multicomponent Glasses with Adjustable Properties (Adv. Mater. 44/2024)

Preparation of Glass-Infiltrated 3Y-Tzp/al2o3/glass Composites

Fabrication of Glass‐Ceramic 3D Micro‐Optics by Combining Laser Lithography and Calcination

Evaluation of mold materials for precision glass molding

A new approach to preparing bulk rapidly solidified metal/glass composites

Realizing Translucency in Aluminosilicate Glass at Ultralow Temperature Via Cold Sintering Process