Abstract:This study presents a novel synthesis route for high-entropy alloys (HEAs) and high-entropy metallic glass (HEMG) using radio frequency (RF) magnetron sputtering and controlling the HEA phase selection according to atomic size difference (δ) and film thickness. The preparation of HEAs using sputtering requires either multitargets or the preparation of a target containing at least five distinct elements. In developing HEA-preparation techniques, the emergence of a novel sputtering target system is promising to prepare a wide range of HEAs. A new HEA-preparation technique is developed to avoid multitargets and configure the target elements with the required components in a single target system. Because of a customizable target facility, initially, a TiZrNbMoTaCr target emerged with an amorphous phase owing to a high δ value of 7.6, which was followed by a solid solution (SS) by lowering the δ value to 5 (≤6.6). Thus, this system was tested for the first time to prepare TiZrNbMoTa HEA and TiZrNbMoTa HEMG via RF magnetron sputtering. Both films were analyzed using X-ray diffraction (XRD), X-ray photoelectron spectroscopy, field emission scanning electron microscopy cross-sectional thickness, and atomic force microscopy (AFM). Furthermore, HEMG showed higher hardness 10.3 (±0.17) GPa, modulus 186 (±7) GPa, elastic deformation (0.055) and plastic deformation (0.032 GPa), smooth surface, lower corrosion current density (Icorr), and robust cell viability compared to CP-Ti and HEA. XRD analysis of the film showed SS with a body-centered cubic (BCC) structure with (110) as the preferred orientation. The valence electron concentration [VEC = 4.8 (<6.87)] also confirmed the BCC structure. Furthermore, the morphology of the thin film was analyzed through AFM, revealing a smooth surface for HEMG. Inclusively, the concept of configurational entropy (ΔSmix) is applied and the crystalline phase is achieved at room temperature, optimizing the processing by avoiding further furnace usage.

Design and High-Throughput Screening of High Entropy Alloys

Design and Development of High-Entropy Alloys with a Tailored Composition and Phase Structure Based on Thermodynamic Parameters and Film Thickness Using a Novel Combinatorial Target

Compositional Gradient Films Constructed by Sputtering in a Multicomponent Ti–Al–(Cr, Fe, Ni) System

Non-equiatomic high entropy alloys: Approach towards rapid alloy screening and property-oriented design

High-Throughput Calculations for High-Entropy Alloys: A Brief Review

High Entropy Alloys Mined From Phase Diagrams

High-Entropy Alloys – A New Era of Exploitation

A New Strategy to Design Eutectic High-Entropy Alloys Using Mixing Enthalpy

Alloy Design Strategies and Future Trends in High-Entropy Alloys

Design of High-Entropy Alloys with a Single Solid-Solution Phase: Average Properties Vs. Their Variances

An efficient approach to develop and screen out high-entropy alloy composition with high performance for biomedical application

High-entropy Alloys: an Overview on the Fundamentals, Development, and Future Perspective

Efficient Alloy Design Strategy for Fast Searching for High-Entropy Alloys with Desired Mechanical Properties

High-throughput and data-driven machine learning techniques for discovering high-entropy alloys

The application of EET in high-entropy alloy

High-throughput design of high-performance lightweight high-entropy alloys

High entropy alloys: A review of preparation techniques, properties and industry applications

Machine Learning Assisted Design of High Entropy Alloys with Desired Property

High Entropy Alloys: from Bulk Metallic Materials to Nanoparticles

Efficient screening of single phase forming low-activation high entropy alloys

Elemental Partitioning As a Route to Design Precipitation-Hardened High Entropy Alloys