Abstract:The mechanical and thermal properties of heat-resistant ceramic materials based on refractory oxides largely depend on the defect-free nature of their crystal structure, the presence of extraneous phases, the size and orientation of the grains. We present the results of studying the structure of ceramic fibers of mullite-corundum composition during high-temperature heating using optical polarization microscopy. The structural features of a continuous fiber of Al 2 O 3 – SiO 2 system heat-treated in a free state and under tension, as well as the structure of short fibers of a similar composition obtained by injecting a solution with subsequent heat treatment of the fiber mass at different temperatures were studied. It is shown that the structure of a continuous fiber after heat treatment in the free state has a multidirectional orientation of the grains, whereas heat treatment at the same temperatures under tension leads to the formation of an oriented uniaxial structure. Thus, the fibers obtained from the same solution and heat-treated at the same temperatures are characterized by different strength values. Moreover, the strength of a fiber with an oriented uniaxial structure is one and a half times higher than that of a fiber with a multidirectional grain orientation, which greatly facilitates its further processing. It is also revealed that structural defects like incomplete crystallization, collective recrystallization, and inhomogeneous inclusions of the second phase, characteristic of short fibers obtained by nozzle spraying, negatively affect the thermal properties of thermal insulation made of such fibers. The results obtained can be used to improve the methods of analyzing the microstructure of aluminum oxide fibers using the method of optical polarization microscopy.

OXIDE CONTINUOUS FIBERS AS A PART OF FLEXIBLE HIGH TEMPERATURE INSULATION

Preparation of Continuous Aluminum Oxide Fibers with Silicon Oxide and Zirconium Oxide Additives

High-temperature resistance and thermal insulation performance of continuous SiMOC ceramic fibers fabricated by the modified sol-gel method combined with dry spinning

Multi-phase SiZrOC nanofibers with outstanding flexibility and stability for thermal insulation up to 1400 °C

Flexible porous SiZrOC ultrafine fibers for high-temperature thermal insulation

Synthesis of flexible, strong, and lightweight oxide ceramic nanofibers via direct electrospinning of inorganic sol for thermal insulation

Status and strategies for fabricating flexible oxide ceramic micro-nanofiber materials

Oxide ceramic fibers via dry spinning process—From lab to fab

Fabrication of continuous SiOC ceramic fibers by polyethylene oxide assisted sol-gel method

Growth mechanism and phase transformation of ZrO2 nanofibers fabricated by sol–gel electrospinning

Flexible ultrafine nearly stoichiometric polycrystalline SiC fibers with excellent oxidation resistance and superior thermal stability up to 1900 °C

Research Development for the Fabrication of Inorganic Continuous Mullite Fiber

Study of the structural changes in oxide ceramics using polarization microscopy

High-temperature flexible, strength and hydrophobic YSZ/SiO2 nanofibrous membranes with excellent thermal insulation

Flexible Al 2 O 3 /ZrO 2 nanofibrous membranes for thermal insulation

Fabrication of Al2O3 aerogel-SiO2 fiber composite with enhanced thermal insulation and high heat resistance

Continuous, Strong, Porous Silk Firoin-Based Aerogel Fibers toward Textile Thermal Insulation

Electrospun flexible calcium zirconate fiber membrane with excellent thermal stability and alkali resistance

Inhibited Grain Growth Through Phase Transition Modulation Enables Excellent Mechanical Properties in Oxide Ceramic Nanofibers up to 1700°C

Stabilizing nanocrystalline oxide nanofibers at elevated temperatures by coating nanoscale surface amorphous films.

Porous aluminum oxide insulation materials tested in space mission