Dion–Jacobson halide perovskites for photovoltaic and photodetection applications

Huiying Fu

DOI: https://doi.org/10.1039/d1tc01061a

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:This review focuses on recent progress involving the photovoltaic and photodetection properties of Dion–Jacobson perovskites and the enhanced stability of Dion–Jacobson perovskite solar cells.

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

The Rise of Quasi-2D Dion-Jacobson Perovskites for Photovoltaics.

Jieyi Chen,Zihao Zhai,Qi Liu,Huiqiong Zhou

DOI: https://doi.org/10.1039/d3nh00209h

2023-01-01

Nanoscale Horizons

Abstract:With the advance of nanotechnology, the past couple of years have witnessed the fast development of quasi two-dimensional (2D) halide perovskites, which exhibit outstanding long-term stability against moisture and heat, compared with their three-dimensional (3D) counterparts. As one of the most common structures in 2D halide perovskites, quasi-2D Dion-Jacobson (DJ) perovskites show multiple-quantum-well structures with n layers of [BX6]4- octahedral inorganic sheets sandwiched by two layers of diammonium spacers, thus exhibiting superior structural stability due to the elimination of van der Waals gaps. Thanks to the achievement of high power conversion efficiency accompanied by impressive stability, quasi-2D DJ perovskite solar cells (PSCs) have recently drawn extensive attention in the field. This review first introduces the fundamental understanding of quasi-2D DJ halide perovskites, including their superior stability, high exciton binding energy, and compositional flexibility and tunable properties. We then summarize detailed strategies to prepare high-quality quasi-2D DJ perovskites for PSCs, encompassing compositional engineering, solvent engineering, additive addition, and annealing processes. Moreover, the surface/interface modification and 2D-3D hybrid perovskite heterojunction are also discussed, for providing strategies to optimize the fabrication of quasi-2D DJ PSCs. Lastly, current challenges and perspectives toward the future development of quasi-2D DJ perovskites for photovoltaics are outlined.
Progress and perspective in Dion-Jacobson phase 2D layered perovskite optoelectronic applications

Wei Guo,Zhi Yang,Jialin Dang,Minqiang Wang

DOI: https://doi.org/10.1016/j.nanoen.2021.106129

IF: 17.6

2021-08-01

Nano Energy

Abstract:<p>2D organic-inorganic halide perovskites have recently become the "next big thing" as promising candidates in optoelectronics. They possess higher moisture stability and lower ion migration compared to 3D perovskites due to the incorporation of bulky organic spacers. Compared to 2D Ruddlesden-Popper (RP) phase with two monoammoniums, 2D Dion-Jacobson (DJ) phase containing one diammonium has achieved a tighter connection between inorganic sheets due to formation of hydrogen bonds, resulting in higher crystal stability and more favorable charge transfer. RP phase solar cell has increased from 4.73% to 18.24% within six years, whereas DJ phase device shows a steep efficiency rise from 7.32% to 17.9% within only one year. Herein, this review provides in-depth understandings on optical property, orientation and charge transport, and energy band alignment of DJ phase perovskites, and raise perspectives that how they are affected by n value and diammoniums characteristics. The recent advances in solar cells, light-emitting diodes, and photodetectors have also been summarized. Finally, we discuss the remaining challenges of boosting device efficiency and try to answer the key scientific question that how to narrow phase distribution and engineer vertical orientation achieving the favorable energy alignment.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Dion-Jacobson Two-Dimensional Perovskite Solar Cells Based on Benzene Dimethanammonium Cation

Bat-El Cohen,Yiming Li,Qingbo Meng,Lioz Etgar

DOI: https://doi.org/10.1021/acs.nanolett.9b00387

2019-04-10

Abstract:Organic-inorganic perovskite structured compounds have recently emerged as attractive materials in the fields of photovoltaic due to their exciting optical properties and easy syntheses, as well as exceptional structural and optical tunability. This work presents a Dion-Jacobson two-dimensional (2D) perovskite using diammonium as the barrier molecule. We show that the diammonium barrier molecule is responsible for the perovskite layers' orientation supported by Hall Effect measurements, which results in a high efficiency solar cell for 2D perovskite without the need for additives or any additional treatment. The 2D perovskite cells achieved an efficiency of 15.6%, which was one of the highest reported for low-dimensional perovskite. Charge extraction, voltage decay, and charge collection efficiency measurements show the beneficial alignment of the 2D perovskites related to the selective contacts. Stability characterization shows that the stability for the 2D perovskite was enhanced compared with their 3D counterparts.
Advances in Dion-Jacobson Phase Two-Dimensional Metal Halide Perovskite Solar Cells

Tianqi Niu,Qifan Xue,Hin-Lap Yip

DOI: https://doi.org/10.1515/nanoph-2021-0052

IF: 7.5

2020-01-01

Nanophotonics

Abstract:Low-dimensional metal halide perovskites have emerged as promising alternatives to the traditional three-dimensional (3D) components, due to their greater structural tunability and environmental stability. Dion-Jacobson (DJ) phase two-dimensional (2D) perovskites, which are formed by incorporating bulky organic diammonium cations into inorganic frameworks that comprises a symmetrically layered array, have recently attracted increasing research interest. The structure-property characteristics of DJ phase perovskites endow them with a unique combination of photovoltaic efficiency and stability, which has led to their impressive employment in perovskite solar cells (PSCs). Here, we review the achievements that have been made to date in the exploitation of DJ phase perovskites in photovoltaic applications. We summarize the various ligand designs, optimization strategies and applications of DJ phase PSCs, and examine the current understanding of the mechanisms underlying their functional behavior. Finally, we discuss the remaining bottlenecks and future outlook for these promising materials, and possible development directions of further commercial processes.
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena,Ashish Kulkarni,Tsutomu Miyasaka

DOI: https://doi.org/10.1021/acs.chemrev.8b00539

IF: 62.1

2019-03-01

Chemical Reviews

Abstract:The photovoltaics of organic-inorganic lead halide perovskite materials have shown rapid improvements in solar cell performance, surpassing the top efficiency of semiconductor compounds such as CdTe and CIGS (copper indium gallium selenide) used in solar cells in just about a decade. Perovskite preparation via simple and inexpensive solution processes demonstrates the immense potential of this thin-film solar cell technology to become a low-cost alternative to the presently commercially available photovoltaic technologies. Significant developments in almost all aspects of perovskite solar cells and discoveries of some fascinating properties of such hybrid perovskites have been made recently. This Review describes the fundamentals, recent research progress, present status, and our views on future prospects of perovskite-based photovoltaics, with discussions focused on strategies to improve both intrinsic and extrinsic (environmental) stabilities of high-efficiency devices. Strategies and challenges regarding compositional engineering of the hybrid perovskite structure are discussed, including potentials for developing all-inorganic and lead-free perovskite materials. Looking at the latest cutting-edge research, the prospects for perovskite-based photovoltaic and optoelectronic devices, including non-photovoltaic applications such as X-ray detectors and image sensing devices in industrialization, are described. In addition to the aforementioned major topics, we also review, as a background, our encounter with perovskite materials for the first solar cell application, which should inspire young researchers in chemistry and physics to identify and work on challenging interdisciplinary research problems through exchanges between academia and industry.

chemistry, multidisciplinary
Compositional and Solvent Engineering in Dion–Jacobson 2D Perovskites Boosts Solar Cell Efficiency and Stability

Weijun Ke,Lingling Mao,Constantinos C. Stoumpos,Justin Hoffman,Ioannis Spanopoulos,Aditya D. Mohite,Mercouri G. Kanatzidis

DOI: https://doi.org/10.1002/aenm.201803384

IF: 27.8

2019-01-21

Advanced Energy Materials

Abstract:Hybrid halide 2D perovskites deserve special attention because they exhibit superior environmental stability compared with their 3D analogs. The closer interlayer distance discovered in 2D Dion–Jacobson (DJ) type of halide perovskites relative to 2D Ruddlesden–Popper (RP) perovskites implies better carrier charge transport and superior performance in solar cells. Here, the structure and properties of 2D DJ perovskites employing 3‐(aminomethyl)piperidinium (3AMP2+) as the spacing cation and a mixture of methylammonium (MA+) and formamidinium (FA+) cations in the perovskite cages are presented. Using single‐crystal X‐ray crystallography, it is found that the mixed‐cation (3AMP)(MA0.75FA0.25)3Pb4I13 perovskite has a narrower bandgap, less distorted inorganic framework, and larger PbIPb angles than the single‐cation (3AMP)(MA)3Pb4I13. Furthermore, the (3AMP)(MA0.75FA0.25)3Pb4I13 films made by a solvent‐engineering method with a small amount of hydriodic acid have a much better film morphology and crystalline quality and more preferred perpendicular orientation. As a result, the (3AMP)(MA0.75FA0.25)3Pb4I13‐based solar cells exhibit a champion power conversion efficiency of 12.04% with a high fill factor of 81.04% and a 50% average efficiency improvement compared to the pristine (3AMP)(MA)3Pb4I13 cells. Most importantly, the 2D DJ 3AMP‐based perovskite films and devices show better air and light stability than the 2D RP butylammonium‐based perovskites and their 3D analogs. 2D Dion–Jacobson perovskites have better carrier charge transport because of the closer interlayer distance. Solar cells based on Dion–Jacobson perovskites having mixed organic cations and using solvent‐engineering methods and hydriodic acid additive achieve higher efficiencies with high fill factors. Most importantly, the Dion–Jacobson perovskite solar cells exhibit better environmental stability compared with butylammonium‐based perovskites and 3D analogs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Two-Dimensional Double Perovskites in the Dion–Jacobson Phase Alleviate Parity Forbidden Transitions for Photovoltaic Applications

Robert Stanton,Dhara J. Trivedi

DOI: https://doi.org/10.1021/acsaem.3c03276

IF: 6.4

2024-03-29

ACS Applied Energy Materials

Abstract:Two-dimensional double perovskites have recently been identified as a potential class of materials for the improvement of halide-perovskite-based solar cell technology. The expanded set of utilizable B- and B′-site cations afforded to double perovskites, combined with tunable structural and electronic properties in two-dimensional perovskites, leads to a highly modifiable set of materials, which have yet to be explored. In this study, we investigate the structural, electronic, and thermoelectric properties of these materials and identify a number of key structure–property relationships governing their performance. In the process, we demonstrate a link between the relative electronegativities of the building components and the resultant geometric structures. Furthermore, we provide insights aimed toward alleviating concerns associated with parity forbidden transitions which plague many double perovskite systems. In addition, we identify a number of two-dimensional double perovskites including the mixed-oxidation state In25Tl75Cl-based system which displays optically active transitions as low as 1.41 eV across the Brillouin zone and indicators pointing toward stable experimental synthesis.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Recent progress in 2D/quasi-2D layered metal halide perovskites for solar cells

Jielin Yan,Weiming Qiu,Gang Wu,Paul Heremans,Hongzheng Chen

DOI: https://doi.org/10.1039/C8TA02288G

2018-01-01

Journal of Materials Chemistry

Abstract:As an important category of perovskite materials, two-dimensional (2D) perovskites are attracting increasing research attention these days. Their possibility of combining high performance and stability for perovskite based optoelectronic devices has triggered a new wave of research. This review mainly focuses on the application of 2D perovskite materials for solar cells. We start with a brief introduction of 2D perovskite structures and their unique properties. The recent progress in 2D perovskite solar cells is summarized in three aspects according to the existing forms of the perovskite materials in the devices. In the end, a short outlook with our opinion is given to indicate the possible development trend for this kind of perovskite material.
Two-dimensional perovskite materials: From synthesis to energy-related applications

Changyong Lan,Ziyao Zhou,Renjie Wei,Johnny C. Ho

DOI: https://doi.org/10.1016/j.mtener.2018.10.008

IF: 9.257

2019-01-01

Materials Today Energy

Abstract:Due to the superior optoelectronic properties of halide perovskites, it has attracted wide attentions during the past decade, especially in the field of energy. When the dimension of halide perovskites reduces, novel properties will appear, such as large exciton binding energy, high photoluminescence quantum yield, and enlarged band gap. This way, low dimensional halide perovskites, especially two-dimensional (2D) halide perovskites, have attracted intensive attention in recent years and showed promising applications, including photodetectors, light emitting diodes (LEDs), and solar cells. Various methods were then developed for the synthesis of 2D halide perovskites and studying the exciting optoelectronic properties. The optoelectronic devices based on 2D halide perovskites showed excellent performance, particularly high sensitive photodetection, high electroluminescence with sharp emission peak, and environmental stable solar cells with decent power conversion efficiency. In this case, 2D halide perovskites become superstar materials in perovskites research area. In this review, we summarize the recent progresses in the synthesis and energy applications of 2D halide perovskites, and challenges and future directions in the field.
All‐Inorganic Halide Perovskites for Optoelectronics: Progress and Prospects

Jia Liang,Jie Liu,Zhong Jin

DOI: https://doi.org/10.1002/solr.201700086

IF: 9.1726

2017-01-01

Solar RRL

Abstract:During the past 8 years, solution-processed organic–inorganic metal halide (OMH) perovskites have become some of the most notable materials because they can exhibit high solar cell efficiency, exceeding 20%. However, due to the volatile and hygroscopic nature of the organic cations, OMH perovskites suffer from chemical instability, especially at high temperatures. Therefore, all-inorganic metal halide (IMH) perovskites (CsBX3, B = Pb, Sn, Ge; X = Cl, Br, I) are rapidly emerging as promising alternatives because of their superior stabilities and comparable properties, such as strong emission, high fluorescence quantum yield and tunable bandgap covering entire visible spectrum. Highlighted by these advantages, IMH perovskites have attracted enormous attention, indicating a promising future. In this review, the recent progress on the syntheses of IMH perovskites is outlined. In addition, the research development of IMH perovskites in optoelectronic devices, such as perovskite solar cells, photodetectors, and light-emitting diodes, is introduced. Finally, the challenges facing the field of IMH perovskites are discussed and some possible solutions based on the available literature are suggested.
Progress and Application of Halide Perovskite Materials for Solar Cells and Light Emitting Devices

Maoding Cheng,Jingtian Jiang,Chao Yan,Yuankun Lin,Mansour Mortazavi,Anupama B. Kaul,Qinglong Jiang

DOI: https://doi.org/10.3390/nano14050391

IF: 5.3

2024-02-20

Nanomaterials

Abstract:Halide perovskite materials have attracted worldwide attention in the photovoltaic area due to the rapid improvement in efficiency, from less than 4% in 2009 to 26.1% in 2023 with only a nanometer lever photo-active layer. Meanwhile, this nova star found applications in many other areas, such as light emitting, sensor, etc. This review started with the fundamentals of physics and chemistry behind the excellent performance of halide perovskite materials for photovoltaic/light emitting and the methods for preparing them. Then, it described the basic principles for solar cells and light emitting devices. It summarized the strategies including nanotechnology to improve the performance and the application of halide perovskite materials in these two areas: from structure–property relation to how each component in the devices affects the overall performance. Moreover, this review listed the challenges for the future applications of halide perovskite materials.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Recent Progress in Understanding the Structural, Optoelectronic, and Photophysical Properties of Lead Based Dion–Jacobson Perovskites as Well as Their Application in Solar Cells

Shuyan Shao,Xiaodan Cui,Zhen Li

DOI: https://doi.org/10.1021/acsmaterialslett.1c00684

IF: 11.4

2022-04-08

ACS Materials Letters

Abstract:Dion–Jacobson perovskites (DJPs) have been grabbing surging interest for solar cell (SC) applications due to their superior structural diversity and stability over their 3D based counterparts. Within 3 years of their birth, the DJPSCs have achieved a high power conversion efficiency (PCE) exceeding 18%. Parallel with the advancement in the device performance, the research community also gained a deep understanding of the fundamental properties of DJP materials that influence the performance of the corresponding SCs. This review summarizes the recent progress in understanding the fundamental structural, optoelectronic, and photophysical properties of the DJP materials and strategies used for improving the performance of the corresponding SCs from the molecule design and processing engineering points of view. Moreover, this work discusses the challenges encountered by DJPSCs and the potential research directions and strategies for further improving their performance, with the aim to inspire the future research to push the DJPSCs forward for practical applications.This article has not yet been cited by other publications.

materials science, multidisciplinary
Two-dimensional Dion-Jacobson Halide Perovskites As New-Generation Light Absorbers for Perovskite Solar Cells

Huimin Xiang,Pengyun Liu,Ran,Wei Wang,Wei Zhou,Zongping Shao

DOI: https://doi.org/10.1016/j.rser.2022.112614

2022-01-01

Abstract:Three-dimensional (3D) organic-inorganic halide perovskites have been regarded as promising sunlight harvesters for perovskite solar cells (PSCs). However, the intrinsic instability of 3D perovskites strongly limits their large-scale commercialization. Thus, the development of two-dimensional (2D) halide perovskites as light absorbers in PSCs has recently become a research hotspot, showing better stability than their 3D counterparts due to the introduction of bulky organic spacers. Among various 2D halide perovskites, Dion-Jacobson (DJ) phases exhibit a tighter connection between inorganic slabs than their Ruddlesden-Popper (RP) counterparts, leading to superior structural stability and charge transfer capability. Nevertheless, the power conversion efficiencies (PCEs) of DJ-PSCs are still inferior to their 3D counterparts. An in-time and comprehensive review of DJ perovskites as new-generation light absorbers for PSCs is presented by comparing of DJ perovskites and RP counterparts in terms of optical properties, crystal structure, charge transporting capability and energy level alignment. Furthermore, based on the summarized design criteria of halide perovskites for PSCs, several strategies are presented to improve the PCE and/or stability of DJ-PSCs. Finally, the remaining challenges and future directions for DJ-PSCs are presented and discussed. This review will provide guidelines for the fundamental understanding, design and fabrication of high-performance DJ-PSCs.
Organic-inorganic Hybrid Lead Halide Perovskites for Optoelectronic and Electronic Applications.

Yixin Zhao,Kai Zhu

DOI: https://doi.org/10.1039/c4cs00458b

2016-01-01

ChemInform

Abstract:Organic and inorganic hybrid perovskites (e.g., CH(3)NH(3)PbI(3)), with advantages of facile processing, tunable bandgaps, and superior charge-transfer properties, have emerged as a new class of revolutionary optoelectronic semiconductors promising for various applications. Perovskite solar cells constructed with a variety of configurations have demonstrated unprecedented progress in efficiency, reaching about 20% from multiple groups after only several years of active research. A key to this success is the development of various solution-synthesis and film-deposition techniques for controlling the morphology and composition of hybrid perovskites. The rapid progress in material synthesis and device fabrication has also promoted the development of other optoelectronic applications including light-emitting diodes, photodetectors, and transistors. Both experimental and theoretical investigations on organic-inorganic hybrid perovskites have enabled some critical fundamental understandings of this material system. Recent studies have also demonstrated progress in addressing the potential stability issue, which has been identified as a main challenge for future research on halide perovskites. Here, we review recent progress on hybrid perovskites including basic chemical and crystal structures, chemical synthesis of bulk/nanocrystals and thin films with their chemical and physical properties, device configurations, operation principles for various optoelectronic applications (with a focus on solar cells), and photophysics of charge-carrier dynamics. We also discuss the importance of further understanding of the fundamental properties of hybrid perovskites, especially those related to chemical and structural stabilities.
Highly stable hybrid perovskite light-emitting diodes based on Dion-Jacobson structure

Yuequn Shang,Yuan Liao,Qi Wei,Ziyu Wang,Bo Xiang,Youqi Ke,Weimin Liu,Zhijun Ning

DOI: https://doi.org/10.1126/sciadv.aaw8072

IF: 13.6

2019-08-02

Science Advances

Abstract:The Dion-Jacobson quasi-2D structure improves the stability of perovskite light-emitting diodes.

multidisciplinary sciences
Two-Dimensional halide perovskites: Synthesis, optoelectronic properties, stability, and applications

Sushant Ghimire,Christian Klinke

DOI: https://doi.org/10.48550/arXiv.2110.11710

2021-10-22

Applied Physics

Abstract:Halide perovskites are promising materials for light-emitting and light-harvesting applications. In this context, two-dimensional perovskites such as nanoplatelets or Ruddlesden-Popper and Dion-Jacobson layered structures are important because of their structural flexibility, electronic confinement, and better stability. This review article brings forth an extensive overview of the recent developments of two-dimensional halide perovskites both in the colloidal and non-colloidal forms. We outline the strategy to synthesize and control the shape and discuss different crystalline phases and optoelectronic properties. We review the applications of two-dimensional perovskites in solar cells, light-emitting diodes, lasers, photodetectors, and photocatalysis. Besides, we also emphasize the moisture, thermal, and photostability of these materials in comparison to their three-dimensional analogs.
Review on recent progress of lead-free halide perovskites in optoelectronic applications

Jiabao Li,Jialong Duan,Xiya Yang,Yanyan Duan,Peizhi Yang,Qunwei Tang

DOI: https://doi.org/10.1016/j.nanoen.2020.105526

IF: 17.6

2021-02-01

Nano Energy

Abstract:<p>In the last decade, organic-inorganic hybrid lead-halide perovskites have been attracted tremendous attentions in the photovoltaic and optoelectronic community. Especially for perovskite solar cells (PSCs), the certified efficiency is up to as high as 25.5%, which has surpassed polycrystalline silicon solar cells and is comparable to the monocrystalline silicon solar cells. Till now, although the chemical instability of perovskite has been well alleviated by optimizing the lattice structure, the detrimental lead element is still a challenge for the commercialization process of PSC devices. To effectively resolve this issue, lead-free halide perovskites (LFHPs) have gained growing attentions recently due to their theoretically excellent optoelectronic properties and eco-friendly feature. With the aim to promote the development of LFHPs, in this review, we have mainly summarized the recent advancement of various LFHP materials and their applications in photovoltaics, light-emitting diodes (LEDs), photodetectors and other devices. Strategies for stabilization of perovskite lattice and performance improvement of optoelectronic devices including fabrication technology, compositional engineering and interfacial optimization are also emphasized. Finally, the potential and challenges of LFHPs are further discussed, providing new research direction for future development.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Layered low dimensional Ruddlesden‐Popper and Dion‐Jacobson perovskites: from material properties to photovoltaic device progress

Rui Liu,Xin Hu,Maoxia Xu,Haorong Ren,Hua Yu

DOI: https://doi.org/10.1002/cssc.202300736

IF: 8.4

2023-06-16

ChemSusChem

Abstract:Layered low‐dimensional halide perovskites (LDPs) with multiple quantum well structure have shown increasing research interest in photovoltaic solar cell applications owing to their intrinsic moisture stability and favorable photophysical properties in comparison with their three‐dimensional (3D) counterparts. The most common LDPs are Ruddlesden‐Popper (RP) phases and Dion‐Jacobson (DJ) phases, both of which have made significant research advances in efficiency and stability. However, distinct interlayer cations between RP and DJ phase lead to disparate chemical bonds and different perovskite structures, which endow RP and DJ perovskite with distinctive chemical and physical properties. Many reviews have reported the research progress of LDPs but no summary has elaborated from the perspective of the merits and drawbacks of the RP and DJ phases. Herein, in this review, we offer a comprehensive expound on the merits and promises of RP and DJ LDPs from their chemical structure, physicochemical properties, and photovoltaic performance research progress . Then, we reviewed the recent progress on the synthesis and implementation of RP and DJ LDPs thin films and devices, as well as their optoelectronic properties. Finally, we discussed the possible strategies to resolve existing toughs to realize the desired high‐performance LDPs solar cells.

chemistry, multidisciplinary,green & sustainable science & technology
Dion-Jacobson Phase 2D Layered Perovskites for Solar Cells with Ultrahigh Stability

Sajjad Ahmad,Ping Fu,Shuwen Yu,Qing Yang,Xuan Liu,Xuchao Wang,Xiuli Wang,Xin Guo,Can Li

DOI: https://doi.org/10.1016/j.joule.2018.11.026

IF: 46.048

2019-03-01

Joule

Abstract:2D layered perovskites have emerged as potential alternates to traditional 3D analogs to solve the stability issue of perovskite solar cells (PSCs). However, van der Waals gaps in reported Ruddlesden-Popper (RP) phase 2D perovskites with monoammonium cations provide weak interactions between layers, potentially destabilizing the layered perovskite structure and thus the device. Here we eradicate such gaps by incorporating diammonium cations into MAPbI3, developing a series of Dion-Jacobson phase 2D perovskites that afford a cell efficiency of 13.3% with ultrahigh device stability. Unencapsulated devices retain over 95% efficiency upon exposure to various harsh stresses including ambient air (40%–70% relative humidity [RH]) for 4,000 hr, damp heat (85°C and 85% RH) for 168 hr, and continuous light illumination for 3,000 hr. The improved device stability over the RP counterpart is attributed to alternating hydrogen bonding interactions between diammonium cations and inorganic slabs, strengthening the 2D layered perovskite structure.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Lead-free all-inorganic halide double perovskite materials for optoelectronic applications: progress, performance and design

Tao Zuo,Fangfang Qi,ChiYung Yam,Lingyi Meng

DOI: https://doi.org/10.1039/d2cp03463h

2022-11-18

Abstract:The certified power conversion efficiency of perovskite solar cells is gradually approaching that of crystalline silicon solar cells. Accordingly, considering the advantages of improved thermal stability and environmental friendliness of lead-free all-inorganic halide double perovskites (LFAIHDPs), they have attracted considerable attention in optoelectronic applications. Herein, we review the recent progress on LFAIHDPs via heterovalent substitution of the lead element, including their geometrical and electronic structures, synthetic processes, and applications in optoelectronic devices. Many experimental and theoretical efforts have been devoted to investigating the thermal stability, defects, and optoelectronic properties of lead-free all-inorganic halide double perovskite materials, which have been presented. Lastly, we discuss the application of machine learning strategies to predict novel perovskite structures with excellent thermal stability and optoelectronic performance.

Dion–Jacobson halide perovskites for photovoltaic and photodetection applications

The Rise of Quasi-2D Dion-Jacobson Perovskites for Photovoltaics.

Progress and perspective in Dion-Jacobson phase 2D layered perovskite optoelectronic applications

Dion-Jacobson Two-Dimensional Perovskite Solar Cells Based on Benzene Dimethanammonium Cation

Advances in Dion-Jacobson Phase Two-Dimensional Metal Halide Perovskite Solar Cells

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Compositional and Solvent Engineering in Dion–Jacobson 2D Perovskites Boosts Solar Cell Efficiency and Stability

Two-Dimensional Double Perovskites in the Dion–Jacobson Phase Alleviate Parity Forbidden Transitions for Photovoltaic Applications

Recent progress in 2D/quasi-2D layered metal halide perovskites for solar cells

Two-dimensional perovskite materials: From synthesis to energy-related applications

All‐Inorganic Halide Perovskites for Optoelectronics: Progress and Prospects

Progress and Application of Halide Perovskite Materials for Solar Cells and Light Emitting Devices

Recent Progress in Understanding the Structural, Optoelectronic, and Photophysical Properties of Lead Based Dion–Jacobson Perovskites as Well as Their Application in Solar Cells

Two-dimensional Dion-Jacobson Halide Perovskites As New-Generation Light Absorbers for Perovskite Solar Cells

Organic-inorganic Hybrid Lead Halide Perovskites for Optoelectronic and Electronic Applications.

Highly stable hybrid perovskite light-emitting diodes based on Dion-Jacobson structure

Two-Dimensional halide perovskites: Synthesis, optoelectronic properties, stability, and applications

Review on recent progress of lead-free halide perovskites in optoelectronic applications

Layered low dimensional Ruddlesden‐Popper and Dion‐Jacobson perovskites: from material properties to photovoltaic device progress

Dion-Jacobson Phase 2D Layered Perovskites for Solar Cells with Ultrahigh Stability

Lead-free all-inorganic halide double perovskite materials for optoelectronic applications: progress, performance and design