Abstract:In gas-solid flat-base spout bed with a jet, the flow of particles must go through an intermediate regime where both kinetic/collisional and frictional contributions play a role. In this paper, the statistical framework is proposed to define the generalized granular temperature which sums up the configurational temperature and translational granular temperature. The configurational temperature, translational and rotational granular temperatures of particles are simulated by means of CFD-DEM (discrete element method) in a 3D flat-base spout bed with a jet. The configurational temperatures of particles are calculated from instantaneous overlaps of particles. The translational and rotational granular temperatures of particles are calculated from instantaneous translational and angular velocities of particles. Roughly, the simulated translational and rotational granular temperatures increase, reach maximum, and then decrease with the increase of solids volume fractions. However, the configurational temperature increases with the increase of solids volume fractions. At high solid volume fraction, the predicted configurational temperatures are larger than the translational and rotational granular temperatures, indicating that the rate of energy dissipation do contributes by contact deformation of elastic particles. The generalized granular temperature is proposed to show the relation between the variance of the fluctuation velocity of deformation and the variance of the translational fluctuation velocity of particles. The constitutive relations of particle pressure, viscosity, granular conductivity of fluctuating energy and energy dissipation in rapid-intermediate-dense granular flows are correlated to the generalized granular temperature. The variations of particle pressure, shear viscosity, energy dissipation and granular conductivity are analyzed on the basis of generalized granular temperature in a flat-base spout bed with a jet. The axial velocities of particles predicted by a gas-solid two-fluid model of rapid-intermediate-dense granular flows agree with experimental results in a spout bed. (C) 2015 Elsevier B.V. All rights reserved.

Simulation of liquid-steam critical flow from a pipe filled with granular layer

Water-submerged granular flow through a long efflux tube

Progress in Model for Particle Flow

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Numerical simulation of granular flow behaviors in liquid-solid circulating fluidized bed

Computational Model for Granular Flows based on the Lagrangian Particle Method

Computational Granular Dynamics Simulation of Unsteady Movement in Particle Moving Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Volume diffusion modelling of a sheared granular gas

Numerical simulation of liquid-solid two-phase flow in slurry pipeline transportation

Hydrodynamic simulation of multi-sized high concentration slurry transport in pipelines

Modeling of Unsaturated Granular Flows by a Two-Layer Approach

A Mixture Model With Slip Velocity for Saturated Granular‐Liquid Free‐Surface Flows

Simulated Configurational Temperature of Particles and a Model of Constitutive Relations of Rapid-Intermediate-dense Granular Flow Based on Generalized Granular Temperature

Theoretical study on the critical flow through a straight-edged tube

Flow Characteristic of Steam Jet Condensed into a Water Pipe Flow - a Numerical Study

Numerical simulation of two-phase slug flows in horizontal pipelines: A 3-D smoothed particle hydrodynamics application

Numerical Study of Gas-Solid Flow in A Precalciner Using Kinetic Theory of Granular Flow

Dem Simulation of Wet Granular-Fluid Flows in Spouted Beds: Numerical Studies and Experimental Verifications

Numerical Simulation of Liquid-Solid Two-Phase Flow in Tubular Loop Reactor