Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

Hydrophobic modification of nanocellulose and all-cellulose composite films using deep eutectic solvent as a reaction medium

Pickering Emulsions and Hydrophobized Films of Amphiphilic Cellulose Nanofibers Synthesized in Deep Eutectic Solvent

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO₂ and Fluorine

Facile Preparation and Characteristic Analysis of Sulfated Cellulose Nanofibril via the Pretreatment of Sulfamic Acid-Glycerol Based Deep Eutectic Solvents

Modification and characterization of a novel and fluorine-free cellulose nanofiber with hydrophobic and oleophobic properties

Modification and characterization of a novel and fluorine-free nanocellulose material with hydrophobic and oleophobic properties.

Imparting Cellulose Acetate Films with Hydrophobicity, High Transparency, and Self-Cleaning Function by Constructing a Slippery Liquid-Infused Porous Surface

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Highly Transparent, Self-Reinforced, and Hydrophobic Cellulose Acetate Films Fabricated Based on Thermal Stretching and Surface Engineering

Enteromorpha cellulose micro-nanofibrils/poly(vinyl alcohol) based composite films with excellent hydrophilic, mechanical properties and improved thermal stability

A partial dissolution-regeneration strategy for preparing water-resistant composite film of cellulose I and cellulose II with high light transmittance and adjustable haze

Octadecylamine as chemical modifier for tuned hydrophobicity of surface modified cellulose: toward organophilic cellulose nanocrystals

Protonation and dip-coating synergistically enhancing dimensional stability of multifunctional cellulose-based films

Hydrophobic Cellulose Films with Excellent Strength and Toughness Via Ball Milling Activated Acylation of Microfibrillated Cellulose

Esterification of cellulose using carboxylic acid-based deep eutectic solvents to produce high-yield cellulose nanofibers

Cellulose Nanofibrils Reinforced Films Without Chemical Modification, Hydrophobic, High Elongation, and Foldability

Highly hydrophobic and moisture barrier nanocellulose based films produced via spray deposition

Hydrophobic surface modification of citrus fiber using octenyl succinic anhydride (OSA): Preparation, characterization and emulsifying properties

Tailoring the Holocellulose Fiber/Acrylic Resin Composite Interface with Hydrophobic Carboxymethyl Cellulose to Enhance Optical and Mechanical Properties

Continuously enhanced versatile nanocellulose films enabled by sustaining CO2 capture and in-situ calcification

Insights into Structure and Properties of Cellulose Nanofibrils (cnfs) Prepared by Screw Extrusion and Deep Eutectic Solvent Permeation.