Abstract:This study investigates the mechanical behavior and damage mechanisms of thin-walled glass/epoxy filament wound tubes under quasi-static lateral loads. The novelty is that the tubes are reinforced in critical areas using strip composite patches to provide a topology-optimized tube, and their damage mechanisms and mechanical performance are compared to that of un-reinforced (reference) tubes. To detect the types of damage mechanisms and their progression, the Acoustic Emission (AE) method is employed, accompanied by data clustering analysis. The loading conditions are simulated using the finite element method, and the results are validated through experimental testing. The findings confirm that the inclusion of reinforcing patches improves the stress distribution, leading to enhanced load carrying capacity, stiffness, and energy absorption. Compared to the reference tubes, the reinforced tubes exhibit a remarkable increase of 23.25% in the load carrying capacity, 33.46% in the tube's stiffness, and 23.67% in energy absorption. The analysis of the AE results reveals that both the reference and reinforced tubes experience damage mechanisms such as matrix cracking, fiber-matrix debonding, delamination, and fiber fracture. However, after matrix cracking, delamination becomes dominant in the reinforced tubes, while fiber failure prevails in the reference tubes. Moreover, by combining the AE energy and mechanical energy using the Sentry function, it is observed that the reinforced tubes exhibit a lower rate of damage propagation, indicating superior resistance to damage propagation compared to the reference tubes.

Damage characterization of woven fabric composite using acoustic emission method: warp and bias directions

Progressive failure analysis of 2D woven composites at the meso-micro scale

AE feature extraction and signal representation model based on wavelet packet decomposition

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Investigation on Damage Evolution of Open-Hole Plain Woven Composites under Tensile Load by Acoustic Emission Signal Analysis

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Acoustic Emission-Based Analysis of Damage Mechanisms in Filament Wound Fiber Reinforced Composite Tubes

A Waveform Clustering Method for Damage Mode Identification for Composite Laminates under Hygrothermal Environment

Damage characterization of laminated composites using acoustic emission: A review

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Investigation of Compressive Damage Mechanisms in 3d Braided Composites by the Acoustic Emission Events Energy and Amplitude

In-plane shear damages consideration of hoop wound composite cylinders using acoustic emission method

Acoustic emission characterization of failure modes in banana/ramie/epoxy composites under flexural loading

Experimental investigation on response and failure modes of 2D and 3D woven composites under low velocity impact

Transverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic Emission

Experimental Investigation of Compressive Damage Mechanisms on 3-D Braided Composites by Acoustic Emission

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Mechanical Properties Testing and Failure Mechanism Analysis of 3D Woven Carbon/epoxy Composites

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions