Abstract:The incorporation of hexagonal boron nitride nanosheets into fluorine rubber not only enhances the radiation resistance of composites, but also strengthens their tensile strength and thermal conductivity through the strong interaction force between B and F atoms. Fluorine rubber (FKM) stands as a pivotal sealing material extensively employed in aerospace and nuclear industries. However, its efficacy will be seriously affected by ionizing radiation. Enhancing its radiation resistance becomes imperative to uphold the stability and safety of associated equipment. This study introduced hexagonal boron nitride (h‐BN) into the FKM as radioprotective fillers through mechanical blending. The interfacial interaction between matrix and h‐BN, the mechanical performances, thermal properties, and radiation stability of composites were systematically examined. Noteworthy findings highlight the presence of robust interaction forces between h‐BN and the matrix, leading to increased crosslink density and improved mechanical properties. The tensile strength of composite with 10 phr fillers (BN/FKM‐10) increased by 30% compared to that of pure FKM. Simultaneously, the introduction of h‐BN greatly enhanced thermal conductivity and radiation stability. The absorbed dose required to achieve a 50% reduction in elongation at break of BN/FKM‐10 surpassed that of FKM by 1.69 times. These results underscore the potential of incorporating h‐BN to simultaneously enhance the mechanical performance, thermal property, and radiation resistance of fluorine rubber. Highlights The chemical interaction force between h‐BN and FKM was confirmed. FKM composites tensile strength was enhanced by h‐BN as an additive crosslinker. The incorporation of h‐BN improves FKM composites thermal conductivity. The radiation resistance of FKM composites has been improved with h‐BN.

Research progress on compounding agent and mechanical test method of fluororubber

Preparation of High-Strength and Excellent Compatibility Fluorine/Silicone Rubber Composites under the Synergistic Effect of Fillers

Fluorination Modification of Methyl Vinyl Silicone Rubber and Its Compatibilization Effect on Fluorine/Silicone Rubber Composites

Study on the Preparation of Macromolecular Compatibilizer and Its Effect on the Characteristics of Fluoroelastomer (fkm)/silicone Rubber (MVQ) Blend

Mechanical, thermal, and friction properties of addition-type fluororubber co-filled with Al2O3 particles at high temperature

Research progress of fluorosilicone rubber

Study on Hydrophobic Properties of Fluororubber Prepared by Template Method under High Temperature Conditions

Fretting Wear Behavior of Fluorine Rubber and Short Carbon Fiber Reinforced Fluorine Rubber Matrix Composites

Enhancing mechanical property and thermal conductivity of fluororubber by the synergistic effect of CNT and BN

Mechanical design of rubber-based sealing composites reinforced with short non-asbestos fibers

Research on the Mechanical and Thermal Properties of Carbon-Fiber-Reinforced Rubber Based on a Finite Element Simulation

Enhancing mechanical property, thermal conductivity, and radiation stability of fluorine rubber through incorporation of hexagonal boron nitride nanosheets

Accelerated Aging Behaviors and Mechanism of Fluoroelastomer in Lubricating Oil Medium

Effect of curatives and fillers on vulcanization, mechanical, heat aging, and dynamic properties of silicone rubber and fluororubber blends

Compatibilizing Effect of Fluororubber Grafted by Γ-Methacryloxypropyltrimethoxysliane in Fluororubber/Silicone Rubber Blends

Preparation and mechanical properties of micro- and nano-sized SiC/fluoroelastomer composites

Preparation of FKM/EFEP thermoplastic vulcanizate with excellent heat and oil resistance, gas barrier property and recyclability

Influence of polar‐modified ESBO on the thermal and mechanical properties of FKM/EPDM rubber blends

A combined simulation and experiment study on polyisoprene rubber composites

Compatibilization of Fluororubber/ Silicone Rubber Blends by the Incorporation of 2,2,2-Trifluoroethyl Methacrylate Grafted Silicone Rubber

Facile strategies for green tire tread with enhanced filler-matrix interfacial interactions and dynamic mechanical properties