Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

The preparation of superhydrophobic photocatalytic fluorosilicone/SiO2–TiO2 coating and its self-cleaning performance

Fabrication of superhydrophilic self-cleaning SiO2–TiO2 coating and its photocatalytic performance

Synthesis of TiO2 Based Superhydrophobic Coatings for Efficient Anti-Corrosion and Self-Cleaning on Stone Building Surface

Preparation of a temperature-sensitive superhydrophobic self-cleaning SiO2-TiO2@PDMS coating with photocatalytic activity

Tunable Adhesive Self-Cleaning Coating with Superhydrophobicity and Photocatalytic Activity

Nano-silica modified with silane and fluorinated chemicals to prepare a superhydrophobic coating for enhancing self-cleaning performance

Self-healing superhydrophobic A-SiO2/N-TiO2@HDTMS coating with self-cleaning property

A Facile and Large-Area Fabrication Method of Superhydrophobic Self-Cleaning Fluorinated Polysiloxane/Tio2 Nanocomposite Coatings with Long-Term Durability

Preparation and Characterization of Biomimetic SiO2-TiO2-PDMS Composite Hydrophobic Coating with Self-Cleaning Properties for Wall Protection Applications

Fabrication of silicone modified polyurethane matrix superhydrophobic coating with hydroxy-terminated polydimethylsiloxane modified SiO2 nanoparticles

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Preparation and characterization of SiO2–TiO2 superhydrophilic coatings with photocatalytic activity induced by low temperature

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

Facile Fabrication of a Mechanical, Chemical, Thermal, and Long‐Term Outdoor Durable Fluorine‐Free Superhydrophobic Coating

Preparation of Superhydrophobic Coating from Fluorine-Containing Acrylate Polymer and Polysiloxane with Nano-SiO2

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Synthesis and Characterization of Superhydrophobic Epoxy Resin Coating with SiO2@CuO/HDTMS for Enhanced Self-Cleaning, Photocatalytic, and Corrosion-Resistant Properties

A novel moisture-controlled siloxane-modified hyperbranched waterborne polyurethane for durable superhydrophobic coatings

Extended Hydrophobicity and Self-Cleaning Performance of Waterborne PDMS/TiO2 Nanocomposite Coatings under Accelerated Laboratory and Outdoor Exposure Testing