Abstract:The preparation of monolithic silica aerogels via non-supercritical drying is realized by the following procedures: (1) formation of silica alcogels with perfect network structure by controlling two-step hydrolysis and condensation reaction rates of tetraethoxysilane; (2) improvement and reinforcement of network structure and strength of silica gels through exchanging the pore fluid with ethanol solvent thoroughly, immersing of gels in the ethanol solutions of tetraethyoxysilane and aging; (3) gradual drying under ethanol fluid whose surface tension is much lower than water under ambient pressure. The resulting aerogels were characterized by means of SEM, TEM, TG-DTA, XRD, and adsorption-desorption techniques. It is found that the aerogels, which are made up of uniform spherical nanoparticles with diameters of about 10 nm, are of coherent network structures. Furthermore, the aerogels are porous, and the porosity is as high as 91%. The diameter of the pore sizes is in the range of 10 similar to 30 nm, and the density of the aerogels is low (200 similar to 400 kg . m(-3)). The specific surface area of the aerogels can be as high as 625. 65 m(2) . g(-1). The appearance, microstructure, diameters of primary particles and pore size distributions of the aerogels are in concordance with those prepared by conventional supercritical drying. It is demonstrated that the quality of the resulting aerogels is affected by the preparation conditions adopted in the preparation process. In fact, by adjusting the proportions of the reaction systems, and controlling the adding amounts of acid and base during the two-step hydrolysis and condensation process, silica aerogels with required density, definite strength and ideal morphology can be produced.

Preparation of carbon/silica composite aerogel and application of fire insulation

Preparation and Thermal Stablity of Silica- alumina-fibers Composite Aerogels

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

SiC Network Reinforced SiO2 Aerogel with Improved Compressive Strength and Preeminent Microwave Absorption at Elevated Temperatures

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

Preparation and Properties of Fiber Reinforced SiO_2 Aerogel Insulation Composites

Preparation of Flexible Fiber-Reinforced Aerogel Composites for Thermal Insulation

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Mechanical, Thermal and Flammability Properties of Glass Fiber Film/Silica Aerogel Composites

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Preparation and Characterization of Heat-resistant Silica-alumina Composite Aerogel

Preparation and Characterization of Monolithic Silica Fiber/Al2O3 Aerogel Composites by Non-Supercritical Drying

Synthesis and characterization of ambient-dried microglass fibers/silica aerogel nanocomposites with low thermal conductivity

Monolithic chitosan-silica composite aerogel with comprehensive performances prepared by SBG-FD method

Thermal Insulation Composite Prepared from Carbon Foam and Silica Aerogel under Ambient Pressure

A Novel Silica Aerogel/porous Si3N4 Composite Prepared by Freeze Casting and Sol-Gel Impregnation with High-Performance Thermal Insulation and Wave-Transparent

Preparation and Characterization of Composite SiO2 Aerogel by a Novel One-step Modified Process

Preparation and Properties of Flexible Silica Aerogel Composites for Thermal Insulators