Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

Numerical analysis of battery thermal management system coupling with low-thermal-conductive phase change material and liquid cooling

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Numerical investigation on thermal management system for lithium ion battery using phase change material

Numerical investigation on integrated thermal management for a lithium-ion battery module with a composite phase change material and liquid cooling

Effects analysis on heat dissipation characteristics of lithium-ion battery thermal management system under the synergism of phase change material and liquid cooling method

Enhancing Thermal Performance and Cooling Solutions of Phase Change Material in Battery Thermal Management System: A Computational Analysis

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Numerical study of thermal management of pouch lithium-ion battery based on composite liquid-cooled phase change materials with honeycomb structure

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Performance analysis and comparison study of liquid cooling-based shell-and-tube battery thermal management systems

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Thermal performance enhancement with snowflake fins and liquid cooling in PCM-based battery thermal management system at high ambient temperature and high discharge rate

Experimental Study of Battery Passive Thermal Management System Using Copper Foam-Based Phase Change Materials

Performance Analysis of a Battery Thermal Management System Combining Thermoelectric, Composite Phase Change Material, and Liquid Cooling under Extreme Operating Conditions

A numerical study on thermal control of batteries by phase change materials with liquid cooling

Design and performance of a compact lightweight hybrid thermal management system using phase change material and liquid cooling with a honeycomb-like structure for prismatic lithium-ion batteries

Performance of a Combined Battery Thermal Management System with Dual-Layer Phase Change Materials and Air Cooling Technologies

Thermal management of lithium-ion batteries based on the coupling of liquid cooling and composite phase change materials

A Battery Thermal Management System Coupling High-Stable Phase Change Material Module with Internal Liquid Cooling

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

Numerical analysis of lithium-ion battery thermal management system using phase change material assisted by liquid cooling method