Abstract:Results are presented on the fabrication and characterization of high critical temperature Josephson junctions in thin films of YBa2Cu3O7−δ produced by the process of focused electron-beam irradiation using 350 keV electrons. The junctions so produced have uniform spatial current densities, can be described in terms of the resistive shunted junction model, and their current densities can be tailored for a given operating temperature. The physical properties of the damaged barrier can be described as a superconducting material of either reduced or zero critical temperature (Tc), which has a length of ∼15 nm. The Tc reduction is caused primarily by oxygen Frenkel defects in the Cu–O planes. The large beam currents used in the fabrication of the junctions mean that the extent of the barrier is limited by the incident electron-beam diameter, rather than by scattering within the film. The properties of the barrier can be calculated using a superconductor/normal/superconductor (SNS) junction model with no boundary resistance. From the SNS model, we can predict the scaling of the critical current–resistance (IcRn) product and gain insight into the factors controlling the junction properties, Tc, and reproducibility. From the measured IcRn scaling data, we can predict the IcRn product of a junction at a given operating temperature with a given current density. IcRn products of ∼2 mV can be achieved at 4.2 K. The reproducibility of several junctions in a number of samples can be characterized by the ratio of the maximum-to-minimum critical currents on the same substrate of less than 1.4. Stability over several months has been demonstrated at room and refrigerator temperatures (297 and 281 K) for junctions that have been initially over damaged and then annealed at temperatures ∼380 K. Junctions manufactured using conventional lithography (0.5 μm wide) and which are suitable for digital electronics (Ic=500 μA at 40 K) can achieve IcRn products of 650 μV at 40 K. The production of 100 of these stabilized junctions could be accomplished in ∼4 h of irradiation time. The IcRn scaling also indicates that junctions suitable for high sensitivity superconducting quantum interference devices (Ic∼100 μA) can be made with IcRn products of ∼120 μV at 77 K.

High-temperature superconducting edge-type Josephson junctions with modified interfaces

High-temperature superconducting edge junctions with modified interface barriers

High-temperature superconducting edge-type Josephson junctions with modified interface barriers

High-temperature superconductor edge-geometry SNS junctions with engineered normal-metal layers

High T/sub C/ Superconducting Step-Edge Junctions and Their Properties in Millimeter-Wave Band

Electron-beam damaged high-temperature superconductor Josephson junctions

Anodization-free fabrication process for high-quality cross-type Josephson tunnel junctions based on a Nb/Al-AlO$_x$/Nb trilayer

Enhancing Properties of High-Temperature Superconducting Step-Edge Josephson Junctions by Nano-Multilayers with a Small Mismatch

Intrinsically shunted NbN/TaN/NbN Josephson junctions on Si substrates for large-scale integrated circuits applications

Step-Edge Josephson Junctions on Multilayered High Temperature Superconducting Thin Film

Application of Josephson Edge Type Junctions with a PrBa2Cu307 Barrier Prepared with Br-Ethanol Etching or Cleaning

High Tc Josephson nanoJunctions made by ion irradiation : characteristics and reproducibility

Intrinsic Josephson Junctions Fabricated in a Well-Controlled Way

Physics and technology of high temperature superconducting Josephson junctions

Transport Properties of Tl2Ba2CaCu2O8 Microbridges on a Low-Angle Step Substrate

Electron beam lithography and ion implantation techniques for fabrication of high-Tc Josephson junctions

Development of Self-Shunted Josephson Junctions For a Ten-Superconductor-Layer Fabrication Process: Nb/NbN$_x$/Nb Junctions

Intrinsic Josephson Junctions In C-Axis-Oriented La1.85sr0.15cuo4 Thin Films

Fabrication of HTS ramp-edge-type Josephson junctions and SQUIDs using various YBCO-derivatives as barrier materials

Homointerface Planar Josephson Junction Based on Inverse Proximity Effect