Influence of Nozzle Diameter on Electric Arc Dynamics and Coating Properties in a Cascaded-Anode Plasma Torch
Céline Ruelle,Simon Goutier,Vincent Rat,Geoffroy Rivaud,Alan Kéromnès,Christophe Chazelas,Érick Meillot
DOI: https://doi.org/10.1007/s11666-023-01706-y
IF: 2.839
2024-01-04
Journal of Thermal Spray Technology
Abstract:Electric arc dynamics in plasma torches have an influence of the plasma jet stability and could impact coating properties. Depending on the plasma torch design, arc voltage fluctuations may vary from a hundred to only a few percent of the mean arc voltage. A cascaded-anode plasma torch particularly leads to very low arc voltage fluctuation, due to the presence of neutrodes limiting the amplitude of arc fluctuations. However, the electric arc dynamics and electrode erosion process are still poorly understood in this kind of plasma torches. The aim of this work is to refine the knowledge on the influence of the nozzle's diameter on electric arc dynamics and on zirconia-yttria coating properties. Two plasma-forming gas compositions were studied, connecting several analysis methods (end-on imaging, arc current and arc voltage time monitoring, plasma light fluctuations at nozzle exit, thermal balance evaluation and in-flight particles assessment) to coatings characterization (porosity and hardness measurements). Reducing the nozzle's diameter from 9 to 6.5 mm results in higher arc voltage fluctuations and lower thermal efficiency of the plasma torch. This is due to the warm plasma gas being more evenly distributed in the anode nozzle. After testing, surveys of the 6.5-mm-diameter nozzle show significant longitudinal wear, which may highlight an axial movement of the electric arc on the anode's surface, leading to high arc voltage fluctuations. Finally, the particle velocity is higher in a 6.5-mm-diameter nozzle, resulting in a lower particle temperature and a higher coating porosity.
materials science, coatings & films