Physical Characteristics of Gliding Arc Discharge Plasma Generated in a Laval Nozzle

Shengyong Lu,Xiao-dan Sun,X. D. Li,Jun Yan,Changming Du

DOI: https://doi.org/10.1063/1.4739231

IF: 2.2

2012-01-01

Physics of Plasmas

Abstract:The dynamic behavior of gliding arc discharge generated in a Laval nozzle has been investigated by electrical diagnostics and a high-speed camera. The results show that the voltage waveform keeps the initial shape as the gas flow rate is small, while it becomes less stable with increasing flow rate. During the first half of a cycle, the voltage rises and after that it decreases. In nitrogen and oxygen, the break down voltage for the arc is between 3.3 and 5.5 kV, while it is between 3.3–7.5 kV in air. The waveform of current I remains almost stable; and for nitrogen and oxygen, the maximum value of current I is between 0.28 and 0.46 A. With increasing flow rate, the power consumption in air first increases and then decreases; it remains in the range of 110–217 W, and gradually increases in nitrogen and oxygen. The power consumption in oxygen is lower than that in nitrogen; the input of the energy density decreases with increasing flow rate for all the three gases. The development of the arc is tracked and recorded by a high-speed camera. The cycle is stable at 10 ms for flow rates up to 1 m3 h−1. At a higher flow rate, the cycle becomes unstable.