Abstract:This work introduces a new equivalent circuit generation method which can compute an accurate equivalent circuit representation for the known/measured impedance characteristics of antennas, which may assist in matching circuit design, non-Foster matching network design, and deep-learning antenna design. The method utilizes a modified Drude-Lorentz resonator representation inspired by optical material dispersion modeling to create multiple sub-circuits based on determined resonances in the impedance spectrum. Each computed sub-circuit is necessarily composed of physically realizable resistors, capacitors, and inductors, and they are connected in series to accurately reconstruct the device's corresponding impedance characteristics over a specified region of interest. The process is automated and applicable to a wide range of antennas and electromagnetic devices with multiple resonance phenomena. Current equivalent circuit design methods are limited by a lack of generalization and can require complex, active, or non-realizable circuit topologies. The proposed Drude-Lorentz-based approach can provide valuable insight into an antenna's resonant behavior while remaining general-purpose and only requiring passive components which are physically realizable. This improved generality is achieved by not requiring physical insights, but rather only utilizing the impedance data alone. Additionally, the method creates simpler circuits than other general methods, requiring less components and component types. This method is employed to create equivalent circuits of four different exemplary types of antennas, a patch antenna, a loop antenna, a spherical helix antenna, and a metantenna unit cell. The impedances generated from these circuit examples are compared with results of their full-wave simulation counterparts and found to be in excellent agreement.

Impedance formulas of RF patch resonators and antennas of cavity model using fringe extensions of patches from DC capacitors

Differential Probe Fed Liquid Crystal-Based Frequency Tunable Circular Ring Patch Antenna.

Characterization Of Near-Field Coupling Effects From Complicated Three-Dimensional Structures In Rectangular Cavities Using Fast Integral Equation Method

Wideband Description of the Finite-Ground Coplanar Waveguide-Type Structures with Discontinuities

Impact of Fringe Effect on Measuring Accuracy of Planar Capacitive Sensors

Transient responses of fractal dipole antennas excited by an EMP

Radiation characteristics of rectangular chirostrip antenna

Electromagnetic analysis of thin film bulk acoustic resonator

Resonant Frequency of a Rectangular Patch Sensor Covered with Multilayered Dielectric Structures

Impedance Bandwidth Enhancement Using Capacitor-Controlled Series Resonance in an Antenna’s Feeding Structure

Rigorous characterization of EMC antennas

Study on an Accurate and Efficient Design Method of Resonant FSSs Based on the Macro-Model of Units in the Basic Strip-Gap FSS

Equivalent Circuit Model of On-Wafer Interconnects for Cmos Rfics

Comparison Of Two Compact 2d-Fdfd Methods And Their Application To Extraction Of Circuit Parameters

Thin and Broadband Electromagnetic Absorber Design Using Resistors and Capacitors Loaded Frequency Selective Surface

Research of Coupling Coefficient Extraction of a Cavity Resonator

Physically Realizable Antenna Equivalent Circuit Generation

Compact Dielectric‐resonator‐on‐patch Antenna with Bandwidth Enhancement

An Impedance Surface Technique for Wideband Matching and Miniaturization of Circular Patch Antennas

Antiresonant Fabry-P?rot cavity with ultralow finesse

Optimization of an inset-fed calculations for rectangular microstrip antenna