Abstract:In the last few years, there has been an increase in the use of eco-friendly materials in the area of acoustics made from natural fibers. These materials are preferable to synthetic materials because of their benefits, such as raw material availability, cost-effective processing costs, safe handling, and equivalent acoustic qualities. The main objective of this study is to find out how well the material made from vetiver grass absorbs sound. Following the International Standard ISO 354-2003 and ASTM 423-90, sound absorption tests were done in a reverberation chamber to find the Sound Absorption Coefficient (SAC) and Noise Reduction Coefficient (NRC) over a wide range of frequencies from 100–4000 Hz. To enhance the way the material absorbs noise, several ASTM E795-16 mountings were examined and tested. These mountings, which have air cavity sizes ranging from 0 mm (hard base) to 50, 100, and 300 mm, include J, E600, C50, D10, and C10. The most effective technique to enhance the material's acoustic qualities to lower noise was identified by comparing the SAC and NRC readings of samples with various-sized air gaps. The fitting of C10 with a SynthPF 10 × 50 back and a 50 mm air gap produced the best results (NRC 0.82). The produced porous pine boards with a density of 400 kg/m3 and a width of 20 mm met all the physical and mechanical property standards of the Indian Standards. The study shows that noise-absorbing materials made from vetiver grass could be used in buildings in ways that are better for the environment.

Experimental Investigation of Sound-Absorbing Material of Different Surface Shapes on Noise Reduction Performance of an Acoustic Enclosure

Analysing the Impact of 3D-Printed Perforated Panels and Polyurethane Foam on Sound Absorption Coefficients

Sound Reduction by Metamaterial-Based Acoustic Enclosure

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Effect of the Pore Shape and Size of 3D-Printed Open-Porous ABS Materials on Sound Absorption Performance

Sound Reduction Control in Acoustic Enclosure with Air Ventilation

Influence Of Boundary Restraints On Active Control Of Sound Radiation From A Flexible Panel Backed By Acoustical Enclosure

Reducing Interior Noise in a Cylinder Using Micro-Perforated Panels

Porous acoustic metamaterial for simultaneous control of high and low frequency machinery noise: Case study of a water pump

Numerical Study of Active Control of Interior Noise in A Structural-Acoustic Enclosure

Acoustic absorption of passive destructive interference cavities

Numerical Study of the Acoustic Properties of Micro-Perforated Panels with Tapered Hole

Study on Sound Absorption Properties of Fiber Materials and Perforated Components and Their Composite Structures with Different Structural Parameters

Status and noise reduction analysis of robotics lab in an academic institute by using acoustic materials

Prediction of sound transmission loss of conical acoustic enclosure using statistical energy analysis and its experimental validation

Recent Trends in Porous Sound-Absorbing Materials

Optimal Active Noise Control of Sound Field in Enclosures

Investigating the Potential of Transparent Parallel-Arranged Micro-Perforated Panels (MPPs) as Sound Absorbers in Classrooms

Noise Control in Enclosures: Modeling and Experiments with T-shaped Acoustic Resonators

Exploring sound absorption properties of porous wood-based eco-friendly materials for noise reduction in buildings

Optimizing acoustic liner conditions for noise control: A study of flexible components and restraint conditions