Abstract:The main failure mode of a wheel–axle assembly, which is an important moving part of rail vehicles, in the interference fit zone is partial fatigue. Given that neither the plane analytical method nor the axisymmetric finite element method can reveal the local and stochastic contact stress concentration at the end of the wheel seat, this study analyzed various factors influencing a machined mating surface and found that the cylindricity error is a key factor in transforming the plane contact into a 3D contact. In addition, the experimental data of the pressing force applied to 60 groups of wheel–axle assemblies were analyzed, and the circumferential contour of the mating surface was found to conform to a beta distribution. Accordingly, a method for obtaining random interpolation points on the circumferential contour was proposed. To ensure the continuity of the mating surface, the circumferential Hermite interpolation method and the axial cubic interpolation method were employed, and the contact surface with random characteristics was modeled. Based on the random ergodicity of the mating surface, a small-sample 3D finite element model of a wheel–axle assembly was established using the random cylindricity error, and a calculation method for the 3D contact stress was proposed. Taking the RE2B axle of railway locomotive as an example, compared with the axisymmetric method, the inhomogeneity analysis of the contact stress of the small-sample model proposed in this paper could help explain the problem of local stress concentration at the end of the wheel seat. The analysis results showed that the maximum stress of the 3D model based on the cylindricity is greater than that of the axisymmetric model, enabling strength evaluation in the design of wheel–axle assemblies.

Static Contact Characteristic Analysis of New Axle Box Bearing Based on EMU Wheelset

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Research on Load Characteristics of Axle-Box Bearing Raceway under Wheel-Rail Excitation

Structures Dynamic Property Analysis of Elastic Composite Cylindrical Rolling Element

Contact Lubrication Performance of Axle Bearing Assembly of Railway Passenger Cars under the High Speed Condition

Influence of wheel-polygonal wear on the dynamic forces within the axle-box bearing of a high-speed train

Analysis on Load Distribution of High-Speed Railway Axle Box Bearings

Measured dynamic load distribution within the in situ axlebox bearing of high-speed trains under polygonal wheel–rail excitation

Three-dimensional contact surface modeling and stress analysis of interference fit based on cylindricity error

Explicit Dynamics Simulation of High-Speed Railway Bearing Based On ANSYS/LS-DYNA

Vibration Analysis of Axle Box Bearing Considering the Coupling Effects of Local Defects and Track Irregularities

Research on Rolling Contact Fatigue Failure of the Bearing Used in High-Speed Electric Multiple Units’ Axle Box Based on a Damage-Coupled Elastic–Plastic Constitutive Model

Contact Lubrication Mechanism for Axle Box Bearing Used in Passenger Train

Strength Check Analysis of Axle Box and Bolted Joints of High-Speed Motor Trains

Combined Influence Mechanism of the Flexible Free Outer Ring on Contact Characteristic in Heavy-Load Cam Roller Bearings

A Simulation Investigation on the Influence of Bearing Outer Ring Defect on Dynamic Vibration Characteristics of the Axle‐Box System

A Coupling Model of High-Speed Train-Axle Box Bearing and the Vibration Characteristics of Bearing with Defects under Wheel Rail Excitation

An FBG-Based Method for Load Measurement of a Cylindrical Rolling Element Bearing

Dynamic contact and stiffness characteristic analysis of angular contact ball bearings under combined external loads

A simulation investigation on the effect of wheel-polygonal wear on dynamic vibration characteristics of the axle-box system

Frictional contact analysis in a spherical roller bearing