Abstract:Stringent oxides of nitrogen (NOx) and particulate matter (PM) emission standards and regulations, increased consumer concern about greenhouse gas (GHG) emissions and cost-effective competition with battery-electric vehicles (BEV) have forced the automotive engine manufacturers to search for novel and innovative strategies. A viable approach for clean, high-efficiency operation for modern spark-ignited (SI) gasoline or natural gas engines is downsized boosted ultra-lean operation. Ultra-lean ignition process, however, gives rise to some serious challenges. Ignition becomes increasingly difficult with the leaner mixture. Moreover, engine operation becomes susceptible to misfires, cycle-to-cycle variability, reduced efficiency, increase unburned hydrocarbon (UHC) emission, etc. Turbulent jet ignition (TJI)—where pre-chamber combustion generated turbulent jet consisting of hot combustion products and active radicals ignite a lean mixture—is a robust yet straightforward ignition strategy that has potential to solve challenges encountered at lean-burn operation. The current study explores the fundamentals as well as the scalability aspect of the TJI strategy. Even though the TJI system is easy to implement, the fluid mechanics and chemical kinetics processes involved in TJI are incredibly complicated due to the complex coupling between turbulence and chemistry. Ignition and flame propagation behavior of TJI were studied in custom-built, optically accessible, constant-volume vessel for lean (ϕ=0.55-0.95$$\phi = 0.55 - 0.95$$) methane/air using simultaneous high-speed schlieren and OH* chemiluminescence imaging. Detailed characteristics of two distinct types of ignition mechanisms—jet ignition and flame ignition—and their dependence on the critical thermophysical and geometric parameters were discussed. The impact of four significant parameters—initial pressure, nozzle diameter, pre-chamber equivalence ratio and pre-chamber volume—was carefully examined. An in-depth discussion of various competing pre-chamber processes on TJI emphasized the necessity of non-dimensionalization. The non-dimensionalization of governing equations for compressible reacting flow produced four dimensionless numbers associated with TJI—Reynolds, Schmidt, Prandtl and Damköhler number. Assuming the transport coefficients are independent of temperature and kinematic transport coefficients are directly proportional to the temperature yielded unity Schmidt and Prandtl number. The remainder two non-dimensional numbers—Reynolds and Damköhler number, regulated the TJI mechanisms of premixed methane/air. Correlations were developed for TJI using Reynolds and Damköhler number. Lastly, the crucial factors and challenges in developing a scalable TJI system were addressed. These results provide useful insights about the TJI fundamentals and serve as a guideline for future pre-chamber design and optimization.

Dimensionless Quantities in Pre-chamber Turbulent Jet Ignition of Premixed Methane/Air

Turbulent jet ignition of ultra-lean methane/air mixture under engine-like condition

Simulation Investigation of Turbulent Jet Ignition (TJI) Combustion in a Dedicated Hybrid Engine under Stoichiometric Condition

Fundamental Experiment of Ignition and Flame Development in Turbulent Jet Ignition Ignited Methane Jet Flame

Experimental and Numerical Study of a Methane-Fueled Pre-chamber System in Rapid Compression Machine

Optical experiments on the effect of turbulent jet ignition on lean burning and engine knocking

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Experimental investigation on the combustion characteristics of ultra-lean premixed hydrogen/air using turbulent jet ignition

A Single Fuel Pre-Chamber Jet Ignition Powertrain Achieving High Load, High Efficiency and Near Zero NOx Emissions

Influence of structure parameters of pre-chamber on lean combustion of active pre-chamber jet ignition engine

Combustion characteristics of methanol engine applying TJI-HPDI with optimized pre-chamber nozzle structure under different injection and spark strategy

Pre-chamber Turbulent Jet Ignition of Methane/air Mixtures with Multiple Orifices in a Large Bore Constant Volume Chamber: Effect of Air-Fuel Equivalence Ratio and Pre-Mixed Pressure

Effects of ignition methods and control parameters on the lean combustion performance and flame geometry of jet ignition based on constant-volume combustion chamber

Research on the structure of pre-chamber and jet orifice of a turbulent jet ignition rotary engine fueled with methanol/gasoline blends

Experimental Observation of the Turbulent Jet Ignition for Extending the Lean Combustion Tolerance with Carbon Dioxide Diluted Mixture

Pre-Chamber Ignition Mechanism: Simulations of Transient Autoignition in a Mixing Layer Between Reactants and Partially-Burnt Products

A Gasoline Fueled Pre-Chamber Jet Ignition Combustion System at Unthrottled Conditions

Understanding Interaction Between Reactive Jets in Pre-Chamber Ignition of Gaseous Fuel

A Lean Burn Gasoline Fueled Pre-Chamber Jet Ignition Combustion System Achieving High Efficiency and Low NOx at Part Load

Numerical study of the effects of excess air ratio on passive pre-chamber jet performance and ignition mechanism

Numerical Investigation on the Jet Characteristics and Combustion Process of an Active Prechamber Combustion System Fueled with Natural Gas