Abstract:Dimethyl ether (DME) is a highly reactive diesel substitute that can be used as a pilot fuel to ignite low- reactivity methane (CH4) in heavy-duty engines. To optimize the efficiency and emissions of CH4/DME dual-fuel engines, it is crucial to study the fundamental combustion characteristics of DME mixed with methane. This study focuses on the influence of CH4 addition on the low-temperature oxidation (LTO) preparation stage and the thermal ignition (TI) preparation stage of DME in the two-stage ignition process, as these two stages respectively control the ignition delay of the first and second stages. The comparison is made between pure DME and a 50% CH4 and 50% DME blended fuel, operating under thermodynamic conditions representing the engine in- cylinder environment at 30 atm pressure, 650K temperature, and a stoichiometric equivalence ratio. The results show that the addition of methane hardly affects the control mechanism of the two-stage ignition of DME. Specifically, the LTO preparation stage is still promoted by the increase in OH radicals in the DME’s low-temperature oxygenation pathways to form KET, and the second stage is still controlled by the H2O2 loop mechanism. The kinetic analysis also reveals that methane addition can compete for some of the OH radicals in the LTO preparation stage, which has a suppressing effect on ignition. However, in the TI preparation stage, methane can promote the loop reaction of OH→HO2→H2O2→OH and promote ignition. For the operating conditions studied here, although methane consumes a total of 7.24% prior to thermal ignition, it only consumes 0.63% of the total amount in the LTO preparation stage and 1.81% of the total amount in the TI preparation stage. This indicates that methane is mainly consumed in the LTO stage, accounting for 65% of the total methane consumption amount. It can be concluded that the kinetic effect of methane has a relatively small impact on the ignition delay of the DME, at least for the conditions investigated here. In other words, the dilution and thermal effects caused by adding methane are the main reasons for the prolonged time of LTO/TI preparation. Overall, more fundamental research is warranted to understand the role of methane in the two-stage ignition process of DME, which could facilitate the development of CH4/DME dual-fuel engines.

Oxidation and thermal stability analysis of hexadecyl mercaptan added to engine oil

Preliminary Evaluation of Octyldithiobenzoic Acid as an Antioxidant in Mineral and Synthetic Oils

Revealing the Molecular Interaction Between CTL Base Oil and Additives and Its Application in the Development of Gasoline Engine Oil

Study on Improving Storage Stability of Marine Engine Oil

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

Oxidation degradation analysis of antioxidant added to CTL base oils: experiments and simulations

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Preparation and Performance of Novel Lubricating Oil Additives Derived from 2-Mercaptobenzothiazole

Effect of Metallic Lubricant Additives on Morphology, Nanostructure, and Oxidation Reactivity of Diesel Soot Particles

Evaluation of molybdate ester as a synergist for arylamine antioxidant in lubricants

Lubrication antagonism mechanism of nano-MoS2 and soot particles in ester base oil

Study Demonstrating Enhanced Oxidation Stability when Arylamine Antioxidants are Combined with Organic Molybdenum Complexes

Synergistic Antioxidation of Organic Molybdenum Complex with Dithiocarbamate Antioxidant Evaluated by Differential Scanning Calorimetry and Thin Film Micro Oxidation Test

Study on Phosphorous‐free Triazinyl Disulfides As Additives in Combustion Engine Base Oil

A Study of Alkylthiomethylbenzotriazoles As Multifunctional Lubricating Oil Additives

Exploration on the Synergistic Effect of Antioxidants for Coal-to-liquid Base Oil: from the Perspective of Oxidation Resistance and Thermal Stability

Experimental Investigations on Efficiency and Instability of Combustion Process in a Diesel Engine Fueled with Ternary Blends of Hydrogen Peroxide Additive/biodiesel/diesel

Tribological Performance of 2‐mercaptobenzothiazole Derivatives As Lubricating Oil Additives

Study on the relationship between high temperature oxidation and temperature rise rate of engine oil

Tribological Property Study of Mercaptobenzothiazole‐containing Borate Derivatives and Its Synergistic Antioxidative Effects with N‐phenyl‐α‐naphthylamine

SYNERGISTIC EFFECT OF ORGANIC MOLYBDATE ESTER AND ARYLAMINE ANTIOXIDANT IN SYNTHETIC LUBRICANTS