Abstract:Abstract Ultra-thin ALD-TaN/PVD-Ta liners have been developed to prevent Cu diffusion into porous interlayer dielectric (ILD) materials envisioned for future copper interconnections. The porous ultra-low k (p-ULK) film is prepared using the spin-on method, and typical k-value and the average pore size of p-ULK used in this paper are 2.3 and 2-3 nm, respectively. Interaction and phenomena at the ILD/ALD-TaN interface have been investigated, and the electrical measurements of samples with a bi-layered ALD-TaN/PVD-Ta barrier were performed after completing the metallization and CMP process. A deep penetration of ALD-TaN was observed on the as-deposited p-ULK, which is due to the interconnected pore structures. However, the surface of the p-ULK is drastically changed after the etch process, where changes are attributed to plasma damage and re-deposition of etched species. Pores can therefore be sealed during the etch process. Furthermore, the plasma damage makes the sidewall more hydrophilic, which may promote the growth of ALD-TaN layer. Based on EELS and EDS profiles, there is no signature of TaN penetration into the etched p-ULK at M1 level with a sharp Ta peak, which indicates excellent stability of ultra-thin ALD-TaN liner. An oxidation test in air ambient and at elevated temperature confirmed the barrier properties of the stacked ALD-TaN/PVD-Ta layers. Any weak point in the barrier allows the Cu to oxidize and to make a color change under an optical microscope. However, all of our samples showed no color change, which implies that the barrier is very uniform and stable. Electrical properties measured at M1 showed excellent results. Our results demonstrate the ability to successfully integrate ALD-TaN barriers with a nanoporous ULK film.

Replacement metal-gate NMOSFETs with ALD TaN/EP-Cu, PVD Ta, and PVD TaN electrode

Replacement metal-gate NMOSFETs with ALD TaN/EP-Cu, PVD Ta, and PVD TaN electrode

Interface Optimization and Band Alignments of HfTiO/InGaAs Gate Stacks by Metalorganic Chemical Vapor Deposition of AlON Passivation Layer

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Atomic Layer Deposition (ALD) of Metal Gates for CMOS

Low resistive ALD TiN metal gate using TDMAT precursor for high performance MOSFET

ALD TaN Barrier for Enhanced Performance with Low Contact Resistance for 14nm Technology Node Cu Interconnects

0.2- AlGaN/GaN High Electron-Mobility Transistors With Atomic Layer Deposition Passivation

Characterization of High-κ Nanolaminates of HfO 2 and Al 2 O 3 Used As Gate Dielectrics in Pmosfets

High Performance Submicron Inversion-Type Enhancement-Mode InGaAs MOSFETs with ALD Al2O3, HfO2 and HfAlO As Gate Dielectrics

Characterization of high-kappa nanolaminates of HfO2 and Al2O3 used as gate dielectrics in pMOSFETs

Enhanced Device Performance of AlGaN/GaN HEMTs Using Thermal Oxidation of Electron-Beam Deposited Aluminum for Gate Oxide

ALD metal-gate/high-k gate stack for Si and Si0.7Ge0.3 surface-channel pMOSFETs

Characterization of High-κ Nanolaminates of HfO2 and Al2O3 Used as Gate Dielectrics in pMOSFETs

Notched-Gate Pmosfet with ALD TiN/High-κ Gate Stack Formed by Selective Wet Etching

Demonstration of aluminum nitride metal oxide semiconductor field effect transistor on sapphire substrate

Improved Gate Stability of Metal–Insulator–Semiconductor-High-Electron-Mobility Transistors with 10 Nm Atomic Layer Deposition Al2O3 by Tetramethylammonium Hydroxide Wet Treatment

Integration of ALD-TaN Liners on Nanoporous Dielectrics

Difference Between Atomic Layer Deposition TiAl and Physical Vapor Deposition TiAl in Threshold Voltage Tuning for Metal Gated NMOSFETs

A Dual-Metal Gate Integration Process for Cmos with Sub-1-Nm Eot Hfo2 by Using Hfn Replacement Gate

GaN metal-oxide-semiconductor field-effect-transistor with atomic layer deposited Al2O3 as gate dielectric