Abstract:Simultaneous Localization and Mapping (SLAM) is the core technology of the intelligent robot system, and it is also the basis for its autonomous movement. In recent years, it has been found that SLAM using a single sensor has certain limitations, such as Inertial Measurement Unit (IMU) noise and serious drift, and 2D radar can only detect environmental information on the same horizontal plane. In this regard, this paper constructs a multi-sensor back-end fusion SLAM algorithm that combines vision, laser, encoder and IMU information. Experiments have proved that compared with using a single sensor, the application of a multi-sensor fusion system makes the edges of the constructed map clearer and the noise reduced. Aiming at the problem of increased calculation caused by particle degradation and too many particles, this paper improves the Gmappping algorithm, and uses the combination of selective resampling and Kullback-Leibler Distance (KLD) sampling to complete resampling. It has been proved by experiments that compared with the original algorithm of Gmapping, the application of the improved algorithm increases the particle convergence speed by 39.85% in the process of indoor mapping. Aiming at the problems that the traditional loop detection algorithm is easily affected by environmental factors, resulting in low detection accuracy, and the loop detection algorithm based on deep convolutional neural network has a large amount of calculation and takes a long time to detect. The main research of this paper is to apply a deep learning-based loop detection algorithm on the multi-sensor fusion framework, and use the combination of high-dimensional and low-dimensional features of the image for loop detection. This paper uses different algorithms to conduct comparative experiments on the dataset CityCentre. The experimental results show that compared with the traditional algorithms Bag of Words (BoW), AlexNet algorithm, VGG19 algorithm, and ResNet32 alg- rithm, the accuracy of the algorithm proposed in this paper has increased by 31.26%, 14.21%, 3.05%, and 1.56%, respectively. In addition, the comparison experiment results of SLAM mapping with the original Real-Time Appearance-Based Mapping (RTAB-MAP) algorithm prove that the loop closure detection algorithm based on deep learning proposed in this paper can enable the system to better build a globally consistent map, including more environmental information.

Fast Closed-Loop SLAM based on the fusion of IMU and Lidar

LiDAR-IMU Tightly-Coupled SLAM Method Based on IEKF and Loop Closure Detection

Real-Time LiDAR Data Assocation Aided by IMU in High Dynamic Environment

A High-Precision SLAM System Based on Lidar, IMU and Wheel Encoders

LVI-Fusion: A Robust Lidar-Visual-Inertial SLAM Scheme

Laser Simultaneous Localization and Mapping Algorithm Based on Adaptive Features and Closed-Loop Optimization

Research on Simultaneous localization and mapping Algorithm based on Lidar and IMU

A Real‐Time and Fast LiDAR–IMU–GNSS SLAM System with Point Cloud Semantic Graph Descriptor Loop‐Closure Detection

A Multi-Sensor Deep Fusion SLAM Algorithm Based on TSDF Map

An Enhanced Multi-Sensor Simultaneous Localization and Mapping (SLAM) Framework with Coarse-to-Fine Loop Closure Detection Based on a Tightly Coupled Error State Iterative Kalman Filter

FELC-SLAM: Feature Extraction and Loop Closure Optimized Lidar SLAM System

A Tightly Coupled Monocular Visual Lidar Odometry with Loop Closure

Real-Time Lidar Odometry and Mapping with Loop Closure

An Efficient and Robust Tightly Coupled Framework for Lidar-IMU Localization and Mapping.

Research on SLAM Algorithm of Mobile Robot Based on the Fusion of 2D LiDAR and Depth Camera

SLAM Algorithm Based on Heterogeneous Sensor Data Fusion

RESEARCH ON SENSOR FUSION-BASED CALIBRATION AND REAL-TIME POINT CLOUD MAPPING METHODS FOR LASER LIDAR AND IMU

Detection-first Tightly-Coupled LiDAR-Visual-Inertial SLAM in Dynamic Environments

Research on Multi-Sensor Fusion SLAM Algorithm Based on Improved Gmapping