Abstract:Simultaneous Localization and Mapping (SLAM) technology based on LiDAR can achieve real-time robot positioning and establish environmental maps in unknown environments. LiDAR odometry can achieve accurate pose estimation in short distances or small-scale environments, but the accuracy will decrease with the accumulation of errors. At the same time, under scenes with insufffcient structural features, point cloud-based LiDAR SLAM will show degradation phenomena, leading to failures in localization and mapping. We propose a loop closure detection method based on fusion of Inertial Measurement Unit (IMU) and LiDAR information to reduce system cumulative errors and solve environment degradation problems. Firstly, by fusing LiDAR key feature and IMU information, an odometry calculation method is proposed based on Iterative Extended Kalman Filtering (IEKF) to improve the accuracy of FAST-LIO initial pose. Then in loop closure detection, by considering geometric and intensity information simultaneously, a new scan context global descriptor is constructed from dedistortion feature points of front-end IMU to enhance the accuracy of loop closure detection for original point cloud descriptors. Finally, GTSAM is used for global optimization and GPS constraint is introduced to reduce trajectory drifts, obtaining globally consistent trajectories and mapping. Compared with existing LiDAR SLAM on KITTI dataset and self-collected dataset, proposed method has smaller trajectory errors on KITTI sequences, which reduced by 15 than baseline FAST-LIO2, and average time consumption of loop closure detection is reduced by about 50 than SC-ALOAM, and mapping drifts is reduced, which enhanced mapping accuracy and robustness while ensuring global consistency of constructed maps.

Real-Time LiDAR Data Assocation Aided by IMU in High Dynamic Environment

LiDAR-Inertial SLAM with Efficiently Extracted Planes

Targetless Calibration of LiDAR-IMU System Based on Continuous-time Batch Estimation

Multiconstraint Spatial and Temporal Calibration of Rotating Line Structured Light Vision Sensor

Real-Time 3D Mapping in Complex Environments Using a Spinning Actuated LiDAR System

RESEARCH ON SENSOR FUSION-BASED CALIBRATION AND REAL-TIME POINT CLOUD MAPPING METHODS FOR LASER LIDAR AND IMU

Robust High Accuracy Visual-Inertial-Laser SLAM System

Real-Time Truly-Coupled Lidar-Inertial Motion Correction and Spatiotemporal Dynamic Object Detection

LiDAR-IMU Tightly-Coupled SLAM Method Based on IEKF and Loop Closure Detection

A Study of Correction to the Point Cloud Distortion Based on MEMS LiDAR System

LiDAR Inertial Odometry Based on Indexed Point and Delayed Removal Strategy in Highly Dynamic Environments

Hierarchical Fusion based High Precision SLAM for Solid-State Lidar

A LiDAR-IMU-GNSS fused mapping method for large-scale and high-speed scenarios

Multi-LIO: A Lightweight Multiple LiDAR-Inertial Odometry System

Research on Simultaneous localization and mapping Algorithm based on Lidar and IMU

Solid-State LiDAR SLAM System with Indoor Degradation Scene Compensation

Multi-frame Fusion Method for Point Cloud of LiDAR Based on IMU

Enhanced Mobile Robot Odometry With Error Kalman Filtering Incorporating 3D Point Cloud Intensity

A Real-time Degeneracy Sensing and Compensation Method for Enhanced LiDAR SLAM