Abstract:Nowadays, electric vehicles (EV) are developed at a very fast pace. Currently, the batteries that are used in EVs are lithium-ion cells with different shapes and configurations. However, the ground impact caused by road debris can hit and penetrate the battery pack and results in a very severe fire accident. To study the ground impact accidents, a simplified finite element model of the battery pack structure using typical cylindrical 21700 cells, and floor-type architecture is analysed. Based on this model, the protection structure is improved using different core geometry and fibre metal laminate material arrangements. The evaluated criteria are battery shortening and specific energy absorption (SEA) of the protective plate. Studies are conducted to investigate the effect of different arrangements of composite layer, thickness of the composite layer, different load cases, thickness of the metal core, and different composite materials. The model is validated using the energy method. Simulation results show that adding composite backplate results in a lower battery shortening. The thinner composite layer also improves SEA while still maintaining safe battery shortening. Two load cases are also evaluated for chosen models to ensure that the protection structure is still effective. Thinner unidirectionally stiff double hull (USDH) thickness also improves SEA, up to a point where battery shortening increases significantly. Finally, changing glass fibre reinforced polymer (GFRP) material to carbon fibre reinforced polymer (CFRP) improves both battery shortening and SEA, but not in a significant way that the cost increase is justified. In this study, the most effective design for the battery pack protection structure is a USDH metal core layer with (h: w: t) = (15.87: 15.87: 1) mm and a 1.2 mm GFRP backplate layer with quasi-isotropic lay-up. Battery shortening is 51.58% better, SEA is 150.54% higher, and structure weight is 40.59% lower compared to the baseline case.

Random vibration fatigue analysis of a multi-material battery pack structure for an electric vehicle

Optimization and Structural Analysis of Automotive Battery Packs Using ANSYS

Finite element modeling of electric vehicle power battery pack and its influence analysis and test research at body-in-white stage

Parallel optimization of design and manufacturing—Carbon fiber battery pack for electric vehicles

Lightweight Design of an Automotive Battery-Pack Enclosure via Advanced High-Strength Steels and Size Optimization

Design Optimization of Multi-material Battery Enclosure for Electric Vehicle

Lightweight design and static strength analysis of battery box for electric vehicle

Crushing stress and vibration fatigue-life optimization of a battery-pack system

Multi‐objective optimization of lithium‐ion battery pack casing for electric vehicles: Key role of materials design and their influence

Strength analysis of the lightweight-designed power battery boxes in electric vehicle

Analysing Vibration Environment of a Power Battery in a Running Electric Vehicle

Structural Analysis of Battery Pack Box for New Energy Vehicles Based on the Application of Basic Foam Aluminum Materials

Optimization of automotive battery pack casing based on equilibrium response surface model and multi-objective particle swarm algorithm

Fatigue Prediction of Electronic Packages Subjected to Random Vibrations

Crashworthiness Analysis of Electric Vehicle With Energy-Absorbing Battery Modules

Analytical Analysis of Electric Vehicle Chassis Frame and Battery Thermal Management System

Finite Element Analysis and Structural Optimization Research of New Energy Vehicle Battery Box

Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles

Study of Various Hybrid Composite Materials and Geometries for Battery Pack Protection Undergoing Ground Impact Loading

Electric vehicles body frame structure design method: An approach to design electric vehicle body structure based on battery arrangement