Abstract:Adhesive bonding of carbon-fiber-reinforced polymers (CFRPs) is a key enabling technology for the assembly of lightweight structures. Surface pretreatment is necessary to remove contaminants related to material manufacturing and ensure bond reliability. The present experimental study focuses on the effect of mechanical abrasion on the damage mechanisms and fracture toughness of CFRP/epoxy joints. The analyzed CFRP plates were provided with a thin layer of surface epoxy matrix and featured enhanced sensitivity to surface preparation. Various degrees of morphological modification and fairly controllable carbon fiber exposure were obtained using sanding with emery paper and grit-blasting with glass particles. In the sanding process, different grit sizes of SiC paper were used, while the grit blasting treatment was carried by varying the sample-to-gun distance and the number of passes. Detailed surveys of surface topography and wettability were carried out using various methods, including scanning electron microscopy (SEM), contact profilometry, and wettability measurements. Mechanical tests were performed using double cantilever beam (DCB) adhesive joints. Two surface conditions were selected for the experiments: sanded interfaces mostly made of a polymer matrix and grit-blasted interfaces featuring a significant degree of exposed carbon fibers. Despite the different topographies, the selected surfaces displayed similar wettability. Besides, the adhesive joints with sanded interfaces had a smooth fracture response (steady-state crack growth). In contrast, the exposed fibers at grit-blasted interfaces enabled large-scale bridging and a significant R-curve behavior. While it is often predicated that quality composite joints require surfaces with a high percentage of the polymer matrix, our mechanical tests show that the exposure of carbon fibers can facilitate a remarkable toughening effect. These results open up for additional interesting prospects for future works concerning toughening of composite joints in automotive and aerospace applications.

The Effect of an Active Diluent on the Properties of Epoxy Resin and Unidirectional Carbon-Fiber-Reinforced Plastics

The Effect of an Active Diluent on the Properties of Epoxy Resin and Unidirectional Carbon-Fiber-Reinforced Plastics

Effect of Active Diluents on Properties of Epoxy Compounds and Coatings Based on Them

Effects of reactive diluent on processing, structure, and properties of epoxy foams and their sandwich composites

The Inlfuence of Reactive Diluent on Properties of Epoxy Resin Coatings

Effect of active diluent content on the technological properties of VARTM resin

Effect of epoxy resin properties on the mechanical properties of carbon fiber/epoxy resin composites

The effect of different active diluents on the properties of epoxy materials

The effects of the contents of modified‐diatomite on the properties of modified‐diatomite/epoxy resin composites

Effect of Mechanical Pretreatments on Damage Mechanisms and Fracture Toughness in CFRP/Epoxy Joints

Mechanical Investigation of Epoxy Based High-Strength Carbon Fiber Braided Composites Modified with Silane Coupling Agents

Effect of Silane Coupling Treatment on the Adhesion between Polyamide and Epoxy Based Composites Reinforced with Carbon Fibers

Epoxy Enhanced by Recycled Milled Carbon Fibres in Adhesively-Bonded CFRP for Structural Strengthening

Furfurylglycidyl ether: a new effective active diluent for epoxy resins from bio-renewable raw materials

The Influence of the Dispersed Filler of the Ni–Fe–Si–C System on the Physicomechanical Properties and Structure of Epoxy Composites

Length effect of short base resin on thermomechanical properties of crosslinked epoxy resin via molecular dynamics simulation

Effects of Bonding Types of Carbon Fibers with Branched Polyethyleneimine on the Interfacial Microstructure and Mechanical Properties of Carbon Fiber/epoxy Resin Composites

The Effect of Carbon Nanofibers on the Mechanical Performance of Epoxy-Based Composites: A Review

Comparative study of reactive diluents with different molecular structures on the curing properties of epoxy adhesives and the interface bonding properties with mortar

A new latent accelerator and study of its effect on physical, mechanical and shelf-life of carbon fiber epoxy prepreg

Role of Bio-Based and Fossil-Based Reactive Diluents in Epoxy Coatings with Amine and Phenalkamine Crosslinker