Abstract:Due to large uncertainties embedded in their geotechnical parameters, dynamic numerical models of landslide run-out distance can only be reliably applied to conduct post-failure back analyses, rather than accurate physical-based forward predictions. Therefore, it is important to quantify these uncertainties, and their effects, to improve the reliability of predictions. This paper proposes a run-out distance prediction methodology within a probabilistic framework to assess the exceedance probability of run-out distance for an individual landslide using a depth-integrated continuum method (Massflow) and a polynomial response surface method coupled with the first-order reliability method (RSM-FORM). The input parameters (i.e., friction angle and pore pressure ratio) are considered as random variables with reasonable probability density functions. The limit state function (LSF) is established based on a given threshold value of the run-out distance. The RSM is then adopted to establish a mathematical function that approximates the real LSF; and then, based on the fitted response surface, the FORM is employed to calculate the probability of the run-out distance exceeding the given threshold value. The 2015 Shenzhen landslide is considered as an example to illustrate the proposed methodology. The results show that our proposed methodology can successfully assess the exceedance probability of the run-out distance at different locations with acceptable computational errors. In addition, the computational efficiency is significantly improved compared to conventional Monte Carlo simulations. Moreover, according to the run-out distance-exceedance probability curve, the area potentially affected by the Shenzhen landslide can be classified into five categories (i.e., extremely high, high, medium, low, and extremely low) based on the different threshold values of exceedance probability (i.e., 50%, 10%, 1%, and 0.1%). The observed deposition area of the Shenzhen landslide lies within the extremely high and high hazard zones, demonstrating the feasibility of conducting landslide hazard zoning using the exceedance probability of the run-out distance. This study thus presents a practical procedure for enhancing the probabilistic run-out distance prediction of individual landslides and provides new ideas for conducting hazard zoning.

A three-dimensional large-deformation random finite-element study of landslide runout considering spatially varying soil

A Decomposed Karhunen–Loève Expansion Scheme for the Discretization of Multidimensional Random Fields in Geotechnical Variability Analysis

Peridynamics-based large-deformation simulations for near-fault landslides considering soil uncertainty

Run-out distance exceedance probability evaluation and hazard zoning of an individual landslide

3D probabilistic landslide run-out hazard evaluation for quantitative risk assessment purposes

Probabilistic Risk Assessment of Slope Failure in 3-D Spatially Variable Soils by Finite Element Method

Three-dimensional run-out analysis and prediction of flow-like landslides using smoothed particle hydrodynamics

Combing soil spatial variation and weakening of the groundwater fluctuation zone for the probabilistic stability analysis of a riverside landslide in the Three Gorges Reservoir area

Three-dimensional Material Point Method Modeling of Runout Behavior of the Hongshiyan Landslide

Three-dimensional distance potential discrete element method for the numerical simulation of landslides

Synthetic Study Method of Dynamic Deformation Process of Landslide

Multivariate Copula-based Framework for Stochastic Analysis of Landslide Runout Distance

Evaluating Slope Stability with 3D Limit Equilibrium Technique and Its Application to Landfill in China

Runout simulation of seismic landslides using discontinuous deformation analysis (DDA) with state-dependent shear strength model

3D large-deformation modelling on face instability and sinkhole formation during tunnelling through non-uniform soils

Probabilistic simulation of entire process of rainfall-induced landslides using random finite element and material point methods with hydro-mechanical coupling

Run-out of the 2015 Shenzhen Landslide Using the Material Point Method with the Softening Model

Spatial–Temporal Variation of Soil Sliding Probability in Cohesive Slopes with Spatially Variable Soils

LANDSLIDE STABILITY ANALYSIS BY THE 3D ELASTIC PLASTIC CONTACT FINITE ELEMENT ALGORITHM

Finite element simulation of an excavation-triggered landslide using large deformation theory

Dynamic reliability analysis of three-dimensional slopes considering the spatial variability in soil parameters