Abstract:One of the requirements of heating and current drive neutral beam injectors (HNB) for ITER is a beam homogeneity greater than 90%, to achieve an optimal beam transmission while keeping the heat load consistently low on the acceleration electrodes. The large size and complexity of ITER negative ion source play a key role in determining the homogeneity of the negative ion current of each of the 1280 beamlets and their divergence, and it is studied in the full-scale prototype source SPIDER. In this work the plasma properties are studied by spectroscopic and electrostatic measurements in the drivers, where the plasma is generated, and in the expansion region, where the plasma drifts and negative ions are produced, and they are correlated with the properties of the beam. The non-homogeneous plasma density profile is related to the non-homogeneous availability of negative ions along the beam vertical profile, with and without cesium evaporation. Visible tomography, a technique capable of characterizing isolated beamlet properties, is used to study the beam's dependence on plasma uniformity along the entire beam profile. Using these tools, it has been demonstrated how an increase in plasma density is linked to an improvement in beam homogeneity. The latter has been directly correlated with plasma homogeneity. The magnetic filter field and biases of the plasma grid and bias plate are responsible for the variation in plasma density and its homogeneity. Non-uniformities in the plasma's top/bottom and left/right distributions have been studied and partially addressed experimentally. The first issue was resolved by adjusting the radio-frequency power supplied to the plasma in different vertical regions, while the second issue was addressed by reversing the direction of the magnetic filter field and increasing the plasma density.

Control of negative ion beam uniformity by using multipower supplies for arc discharge

High-Power Ion Beam Characteristics of a Magnetic Multi-Pole Line-Cusp Ion Source for the HL-2A Tokomak

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Advanced control of neutral beam injected power in DIII-D

1 EX / P 3-21 Plasma Behavior with Hydrogen Supersonic Molecular Beam and Cluster Jet Injection in the HL-2 A Tokamak

Arc discharge regulation of a megawatt hot cathode bucket ion source for the experimental advanced superconducting tokamak neutral beam injector

Correlation of source parameters and beam properties in the early operation of the full size ITER negative ion beam source

Key Issues for the Filament-Arc Ion Source of EAST Neutral Beam Injector Toward High-Power and Long-Pulse Operation

Overview of Experimental Results on the HL-2A Tokamak

Beam Optics Analysis for the 120-keV Multiaperture Accelerator of Neutral Beam Injector

Performance of Positive Ion Based High Power Ion Source of EAST Neutral Beam Injector

Numerical simulation studies on negative hydrogen ion source for uniformity of H - ion beam

Integrated plasma control for long pulse advanced plasma discharges on EAST

Analysis of Power Distribution on Beamline Components at Different Neutralization Efficiencies on NBI Test Stand

Dynamic neutral beam current and voltage control to improve beam efficacy in tokamaks

Spectroscopic diagnostic results of the improved plasma confinement by low hybrid current drive (LHCD)

Transverse Profile Expansion and Homogenization at Target for the Injector Scheme-I Test Stand of China-ADS

Control of electron beam energy-spread by beam loading effects in a laser-plasma accelerator

Recent advances in supersonic molecular beam injection for ELM mitigation and divertor heat load control

Upgrade of Accelerator of High Current Ion Source for EAST Neutral Beam Injector

Study on stray electrons ejecting from a long-pulse negative ion source for fusion